Best Box End Combination Wrenches in 2026

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

72-tooth ratchet gear needs only a 5-degree working swing arc

Box end head pivots 180 degrees to easily get around obstructions

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

AUTOMOTIVE APPLICATIONS: A high quality metric torque extension set that cuts the time in half when removing hard to reach and corroded hex nuts

HIGH QUALITY STEEL: Combination of high-grade S2 steel bits and Chrome-Vanadium alloy steel sockets with mirror-polished chrome-plating that holds up job after job

EXTRA LONG SET: Includes extra-long set (110mm x 3, 4, 5, 6, 7, 8, and 10mm) of hex bit sockets to access tight spaces such as European car suspensions

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

High polish chrome finish with SUPERCOMBO Open End and SUPERTORQUE Box End

SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners. SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastner points

No contact is made at the corners of the hex fasteners

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

Ratcheting Wrench features six sizes in one tool (6-in-1)

3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combition square socket sizes

9/16-Inch and 3/4-Inch hex sizes

Includes 13-pc. ratcheting combination wrenches: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Wrench holder

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

▶ [Superior Quality] - Forged from high quality chrome vanadium steel with mirror polish treatment on the surface, high hardness and corrosion resistance. Torque meets DIN3113 standard. Full-drive box ends deliver reliable torque to tighten or loosen any bolt without rounding.

▶ [14Pcs Metric Wrenches] - 14pcs common sized wrench set include 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm. No-Skip sizing, always have the size you need.

▶ [Practical Design] - 12-Point box end snugly fits hex-shaped fastener heads. The 72-tooth ratchet gears need only a 5-degree working swing arc, suitable for any narrow space.

The original adjustable wrench; Made by the world-famous Crescent brand

Cushioned ergonomic handle increases comfort and reduces fatigue

Larger knurl for easier adjustment to ensure a tight jaw fit

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

MICRO COMBO RATCHET: This 1/4" stick combination drive is 4" long & features 180-degree flexible heads at each end for multiple angles & a knurled low profile thumb wheel for extra precision.

GREAT FOR TIGHT SPACES: This ratchet features a custom reversible switch & a push button quick release. It's great for bodywork, under dash, motorcycles, inside fan cowls & other hard-to-reach spaces.

QUALITY HAND TOOLS: We've got all of your tool needs covered with our wide array of scrapers, pliers, magnets, wrenches, hex bit sets, pin removers & even drive head replacement kits for ratchets!

【10-Piece Wrench Set】 Standard SAE size: 5/32", 3/16", 13/64", 7/32", 15/64", 1/4", 9/32", 5/16", 3/8", 7/16".Wrench sizes are stamped on both sides of handle for easier size identification.

【USAGE】 Perfectly fits all coon small hex fasteners, nuts and bolts, great for automotive, industry, electronics, mechanic, home, hobby and hard to reach, confined space use. Please confirm the size before purchase.

【DESIGN】 Angled 15°box end for regular use applications. Box end：2pcs 6 points, 8pcs 12 points.

15° Offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

6 point box end design for secure fit on hex fasteners

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

Practical holding function thanks to the metal plate in the jaw

Limit stop prevents any slipping

The double-hex geometry reduces the risk of slipping

Made of premium chrome vanadium alloy steel and matt polished, the wrenches are resistant to corrosion and rust and easy to clean, having a long service life.

The wrenches set covers 12 commonly used metric sizes including:8mm,9mm,10mm,11mm,12mm,13mm,14mm,15mm,16mm,17mm,18mm and 19mm, which can meet most repair needs in daily life.

The combination wrench has a U-shaped head for hex or square nuts and a 12-point closed loop head for difficult nuts. Each end has a stamped size for easier identification.

Diameter 86 Millimeters

Design Features 14 Flutes

Extra Thick Wall Construction

HIGH BENDING STRENGTH. Due to double T-profile. Features Slim construction with skin-friendly round finish, Low load zones due to offset rotary axis and Easy to read key width information. Length 13mm.

MORE ROBUST. When force is applied to a spanner, the greatest force acts on the area between the jaw and the shank, which is why STAHLWILLE spanners are reinforced at this point. The special design makes the load zones more resilient, which reduces the risk of breakage to a minimum.

STRONGER. The Anti-Slip Drive profile enables high-force transmission without damaging the fasteners. While the force acts on the fl­ats of the screws, the corners are left free and are not rounded off. Thanks to the forged double hex, they are tougher than any fastener.

Made from heat-treated chrome vanadium steel, with Mirror finish,Slim profile, these wrenches will deliver years of consistent performance.

22 Pieces Ratcheing wrench set with mirror finish includes SAE and metric combination wrenches. This deluxe combo set makes emergency repairs a breeze.

11 Metric + 11 SAE 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″

【Premium Material】The ratcheting wrenches are made of chrome vanadium steel with corrosion-resistant mirror chrome finish for durability.

【180°Flex-head】Box end heads pivot 180 degrees to easily get around obstructions. snugly fit hex-shaped fastener heads and resist slipping off while you work.

【High-efficiency】The 72 teeth ratchet gear needs a minimum of 5 degree swing arc that is perfect for professional mechanics. The best choice for working in tight spaces.

【10 Pcs A Set】 Size: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm. Wrench sizes are stamped on both sides of handle for easier size identification.

【USAGE】 Perfectly fits all coon small hex fasteners, nuts and bolts, great for automotive, industry, electronics, mechanic, home, hobby and hard to reach, confined space use. Please confirm the size before purchase.

【DESIGN】 Angled 15°box end for regular use applications. Box end：2pcs 6 points, 8pcs 12 points.

【10-Piece Wrench Set】 Standard metric size: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm.

【USAGE】 Perfectly fits all coon small hex fasteners, nuts and bolts, great for automotive, industry, electronics, mechanic, home, hobby and hard to reach, confined space use. Please confirm the size before purchase.

【MATERIAL】 Made of high carbon steel and heat treated for strength and durability, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life.

★Premium Material: CR-V, Chromium & Vanadium alloy steel material, high hardness, torque, toughness, and more durable life.

★180°Flex-Head: The 180 degree Flex-Head can perform precise repair work in any space, convenient for small space operation.

★Prevent Rust: Heat treatment the entire product, Fine mirror polishing treatment, Electroplated bright chrome. Beautiful and generous, Prevent rust, Lifelong use.

48-In-one wrench, multi-function wrench, rotating Multi-head, hex sleeve universal wrench set. 48 specifications for durability.

Help you save half of the toolbox. The head can be rotated 360 degrees. According to different needs.

Rotate the model to operate. High hardness and good toughness. The handle is non-slip. 12 tooth design, One sleeve corresponds to eight models of screws. A Total of 8 sleeves. 64 screws are available. Multi-functional design, easy to carry out, one more than one.

【CR-V STEEL】Made of heat treated chrome vanadium steel for strength and durability, with polished and chrome plated finish for rust and corrosion resistance. The torque value is more than 20000 times.

【FLEXIBLE 180 DEGREES】The flex box-end can tilt up to 180°, which helps you to reach confined areas easily and improve your efficiency greatly.

【72-TOOTH RATCHET】The ratcheting box end needs only a 5-degree swing arc to operate. Make it easy and convenient to deal with hard-to-reach areas.

Package : Size: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm. 10 pcs MET mini combination wrenches set with a metal hook.

Application: These mini wrenches are work well in narrow space. It is perfect for all common small hex fasteners, nuts, small equipment or electronics and auto applications, etc.

Features: Box end offset at 15 degrees for convenient access. Compact and lightweight for easy storage and carring.

【2 SET COMBINATION WRENCH】10pcs SAE: 5/32", 3/16", 13/64", 7/32", 15/64", 1/4", 9/32", 5/16", 3/8", 7/16". 10pcs Metric: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm. Storage plastic pouches and key chains for easy organization and quick access.

【USAGE】 The perfect complete set fits all common small hex fasteners and nuts, great for automotive, industry, home, hobby use and more. The mini size is excellent for use in hard to reach, confined space.

【DESIGN】 Angled 15°box end for regular use applications. Box end：2pcs 6 points, 8pcs 12 points.