Best Hes Hardware Assa Abloy Commercial Door Strikes in 2026

REPLACE STANDARD LATCH AND STRIKES – The Defender Security U 10385 door strike is designed to replace the standard, separate latch and deadbolt strike plates with a one-piece combo plate.

MAXIMUM SECURITY STRIKE – This door strike provides maximum security! It comes with a one-piece combo plate plus six 3 in. long screws for maximum security. These longer screws allow for a strong hold, which helps prevent kick-ins.

TALLER LATCH AND BOLT OPENINGS – This door strike features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. hole centers.

New strike plate design for residential doors that no longer latch closed.

Easy to Install. No chiseling or grinding. Only a screwdriver needed.

Unique design provides additional vertical and horizontal latch space.

Six 3 in. long screws provided for maximum security.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

For doors with deadbolt and handle set on 5-1/2 in. to 6 in. hole centers

Provides maximum security

Material: Steel

Finish: Zinc Plated

Overall Size: 4-7/8"

Fail-secure operation - Door remains locked if power to the strike is lost

Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut Strike Plates

Can be used with virtually any cylindrical door locking system

Zinc and Brass Plated Steel Security Box Strike and Face Plate

Fits standard size doors

Mortising required

SIZE : 2.25" x 2.25" overall length and width.

Finish Satin Nickel

EASY to install with just a screw driver require.

✅Field-selectable for fail-safe or fail-secure operation

✅2,200-lb (1000kg) Jaw strength, Tested to 500,000 cycles

✅Complete mounting hardware included, Screw terminals for ease of wiring

This door push bar is made of high quality iron material, which is durable and long service life.

The door will open faster based on convenient non-hand opening with large compression area.

Door Compatible & Lock - This push bar is suitable for door width between: 28"-50"(71-104cm), any metal or wood door acceptable. Also cuttable to suit small sized doors. To keep your safety, this panic bar adopts fire-proof lock and external lever, will do much help especially in emergency occasion.

CHOOSE BACKSET & HANDING

BACKSET: The distance between the edge of the door and Center of the key cylinder.

Features "Latch hold-back function" to allow ingress during business hours. Activated simply by holding in the latchbolt and turning the key the opposite direction until it clicks.

✅Field-selectable for fail-safe or fail-secure operation

✅This strikes feature an ultra-compact design and adjustable stainless steel keepers with over 2,200lbs [1000kg] of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.

✅Suitable for fire exit door with Push-rod lock.The operating principle of electric strike is that electromagnetism produces the force to pull or push the release lever so that to lock or open the door

Category: UNCATEGORIZED -- UNCATEGORIZED

Static strength 1,500 lbs, Dynamic strength 70 ft-lbs

Endurance 1 million cycles, Field selectable fail secure/fail safe

In-frame horizontal adjustment, Internally mounted solenoid

The 9600 was the first surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

Designed to accommodate rim exit devices with a 3/4" [19mm] throw Pullman latch.

FRAME APPLICATION: Metal or Wood.

Deltana SPE225 2-1/4" x 1-3/4" Overall: 2-1/4" Extended Lip Strike Plate, Paint Black

Base Width: 2-1/4"

Lip Ext: 1-3/4"

HES 9400 Electric Strike slim line surface mounted solution. Works with rim exit devices up to 1/2" throw latchbolt.

All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation.

An 1/8" spacer plate is provided to accommodate varying door gaps.

Certified Parts

Made with strong materials

Many parts are finish specific

KEEP YOUR BUSINESS SAFE! The Armored Loop 20" safely transfers electricity to alarmed exit doors.

UPGRADED DOOR SECURITY! Protect your business by electrifying exit doors to sound alarm system.

EASY INSTALLATION! Easy to follow installation instructions are included. Extra security and peace of mind!

Stainless steel bolt structure, structural linkage is made of steel and hardened to resist severe impact, sturdy and durable for use.

NO Mode: Fail-secure type, unlocked when power on, locked when power off, working with DC 12V, 14 to 131 Fahrenheit.

Provides 1,000-pound holding force, two contacts and no polarity requirement, can be opened by push button, remote control, etc (Not included).

HES 5200 Electric Strike Works with cylindrical locksets up to a 3/4" throw latchbolt.

The Grade 1 solution with horizontal adjustability.

Plug-in connector and trim enhancer included. PoE friendly.

Brass automatic door holder and stop with a satin chrome plated finish holds door open while also preventing damage to walls

Wall-mounted strike has 2" projection

Meets ANSI/BHMA A156.16: L01291 specifications

Both Stainless Steel Faceplates

Frame Type - Hollow Metal, Aluminum or Wood

Reversible - Non Handed

【High Quality】 Made of high quality alloy metal material, the maximum impact resistance is 1000kg / 2200lbs after electrification, corrosion resistance, longer service time and higher efficiency.Voltage : DC12V.

【Accessories】 Package include mounting tabs*2, screws*4, diode*1, instruction*1

【Two Models】：You can set the operation mode of Fail Safe or Fail Secure. Just loose the screw and tighten it in the other hole.Fail Safe(NC):When power off,the door is in the open status.Fail Secure(NO):When power off,the door is in the closed status.

628 Clear Anodized Aluminum Finish

Fail Secure-Locked without Power

24 Volt AC (red and black wires)

Dual voltage 12 or 24 VDC. Completely Surface Mounted. Endurance 500,000 Cycles

Grade 1. One 1/8" Spacer Plate Included

Decorative Cover for Sleek New Look

6-14 AC/DC voltage

The HES 1600 Series Electric Strike sets a new standard in the industry by offering dynamic integrated adjustability and field configurable options.

Compatible with any CYLINDRICAL or MORTISE lock. Accommodates up to a 1" deadbolt with enhanced vertical cavity spacing.

The 1600CS includes a 1600 strike body, 1LB faceplate kit (4 faceplates) for LATCHBOLTS and 1DB faceplate kit (4 faceplates) for DEADBOLTS.

【Caution! 】: Please confirm that this is the size you need before ordering! The number of times the electric strike door lock is used is 300,000 times, ❶ You are aluminum power supply and used for a long time, the power may not be enough, not necessarily a problem with the strike lock, you can try to change the power supply. ❷ The coil is not burned, you can try to remove the accumulation of dirt with a dry cloth to wipe

【Two Models】: You can set the operation mode of fail safe or Fail Secure. Just loose the screw and tighten it in the other hole.❶Fail Safe(NC):When power off,the door is in the open status. ❷Fail Secure(NO):When power off,the door is in the closed status.

【Maximum Impact Strength】: After the electric door lock is powered on, the maximum impact resistance is 2200 lb. Our electric door strike is made of high-quality alloy metal materials after passing countless tests before leaving the factory.

HES 9500 Surface Mounted Electric Strike, 3 HOUR Fire Rated.

Works with rim exit devices up to 3/4" throw Pullman latchbolt

The 9500 exceeds grade-1 standards for strength and performance. This unique electric strike complies with NFPA 80-07 guidelines for retrofit into FIRE-RATED frames.