Best Cooling Water Pump Tools in 2026

【Water Pump Sprocket Holder Tool】The water pump sprocket holder tool can hold the timing chain in place so that the water pump can be removed for maintenance. The full-circle structure of the tool can well hold everything in place, avoid camshaft readjustment, and keep parts from falling into the timing chain cover.

【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life.

【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain.

Carburetor Replace # 16100-ZH8-W61 16100-ZH8-W51 16100-ZE1-814 16100-ZE1-825; Ignition coil Replace # 30500-ZE1-033 30500-ZE1-063

Carburetor fit for Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 generator GX140 GX160 GX168 GX168F GX200 5.5HP 6.5HP engine models.

Package include 1 carburetor kit as picture

Removes and installs water pump assembly

Angled teeth prevent the tool from slipping

Use a 1/2" drive ratchet ore breaker bar to turn wrench

Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans; easily hold the water pump pulley in place while loosening the radiator fan

Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3

Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench

The fan clutch removal tool kit consists of 5 fan clutch wrenches in various sizes (22mm, 36mm, 40mm, 47mm, 51mm) and a pulley holder equipped with four pairs of pins.

This specialized fan clutch tool kit is specifically designed for removing and installing fan clutches during repairs or replacements of water pumps, timing chains, or fan clutches.

The pulley holder, along with its four sets of replacement pins, is designed to securely trap and hold bolt-on pulleys using the mounting bolts. It is compatible with most vehicles and newer Chrysler engines that have press-on pulleys requiring special pins for housing retention.

Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly.

Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem

Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate.

Creates a vacuum, holding coolant inside the engine without hand pumping or running the engine

No need to drain the block for simple repairs

Quickly converts from vacuum to a pressure tester, up to the maximum pressure limit of the included pressure cap

27-piece kit - includes 22 test caps, vacuum pump, pressure pump, cone adapter, and air bleeding / coolant hoses

Leak and pressure tests - test cooling systems, radiators and heater cores, head gaskets, headers, and water pumps

Test range - test for cooling system leaks at up to 35 psi

Use with any standard pressure tester

Diameter: 48 mm

Thread size: 3 mm

AN ESSENTIAL TOOL: Detect leakage for auto radiator or water tank,If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, the water tank cover, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.

WIDE USAGE: It is a universal auto tool, work with almost all brands of cars truck and other vehicles.widely compatible for Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on,no need to buy a full set of adapters for an adapter, directly connect the vent hole of the water tank. The advantage of this connection is that you can check the water tank cover leaking or not.

WORKING PRINCIPLE: It makes the tiny holes in the radiator and water tank fully revealed by pressurization. When you use the hand pump to pressurize, the vehicle can't be lifted, and you can't confirm the water leakage at the bottom of the water tank, but this tool can continue to pressurize during the vehicle lifting process, so you can check the water leakage at the bottom of the water tank.

POWERFUL LASER TUBE: OMTech's 130W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance

PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 6 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation

SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability

POWERFUL LASER TUBE: OMTech's 80W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance

PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 5 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation

SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability

Excellent Quality: The turbine shaft seal installer kit is made of premium grade heavy-duty steel with polishing, rust-proof, sturdy, and durable, ensuring a long-term use.

Reliable Performance: Turbine shaft transmission tools are designed to assist in installing turbine shaft seals into their proper grooves and determining the size or compress each seal into the groove. The clutch spring compressor tool is used to remove the snap ring and return spring. The pump puller can quickly disassemble the different models' pumps. Pump bushing, a tool to size your pump bushing, and align your pump rotor, test for play, and movement.

Adjustable Jaws Design: Transmission pump puller features adjustable jaws. Hexagonal screws and threads are fastened without perforation and high strength: flexible screw design, adjustable clamping depth, easy to use.