Best Kingthai Diamond Blades in 2026

Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.

Can be used wet or dry. For light or medium duty cutters.

Sintered diffusion bonded.

✔ Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.

✔ Our Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.

✔ This 4 1/2 inch tile cutter blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.

Arbor: 1"-7/8" bushing, Segment height .395"(10mm). Size is 12"x.115"x.395"/10mm.

Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.

Main features: The product is 12" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.

【EXCELLENT CUTTING SKILLS】- Bi-metal reciprocating saw blades metal with sturdy cobalt edge provide effortless cutting into sheet metal, metal pipe and profile. Blades cut through medium to thick sheet metals 0.1- 0.3 inch (2-8 mm), solid pipes/profiles diameter < 7 inch.

【SPECIAL CUTTING】 - with 0.9 thin wall and set teeth design, metal sawzall blades helps to reduce heat built up and maximize your cutting efficiency for heavy metal cuttings

【SPEED CUTTING】 - With intensive and high density 14TPI teeth, metal sabre saw blades have longer life and faster cutting speed than other standard bi-metal blades in demolition work

【Long-Life Teeth】 Teeth made of bI-metal with 8% Cobalt which makes EZARC reciprocating saw blades with 2times longer life comparing with normal bi-metal blades without cobalt.

【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile.

【Cutting Capacity】 Blades cut through medium to thick sheet metals 3-8 mm, solid pipes/profiles diameter < 100mm.

✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile.

✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb.

✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag.

10pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers

1"-20mm, 1"-5/8", 7/8"-5/8", 20mm-5/8", 5/8"-1/2"

Thickness: 1.3mm

PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength.

WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials.

HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades.

12" Inch x 8 PCD Teeth-Polycrystalline diamond teeth for extreme durability, sharp cuts, and long life

Ultra thin kerf (2.4 mm) provides efficient cuts and minimizes dust

Laser-cut Anti-vibration Vents absord noise and vibration, and prevent sideways movement

Diameter 12"(300mm)，bore 1"(25.4mm) with 1"-20mm arbor, Segment thickness 2.0mm, Dry or wet cutting,

The cutting disc is Designed for cutting porcelain tile ceramic granite marble brick ect

Super Thin X Turbo Segments provide chip free and fast cutting

10-PACK 12 inch diamond saw blades designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.

Can be used wet or dry. For light or medium duty cutters.

Sintered diffusion bonded.

★Efficient: Unique turbo mesh rim blade and X teeth provide fast, precise, smooth cutting.

★Ultra-thin: For fast cutting and low waste. These ultra-thin Reinforced turbo blades are our fastest cutting discs for hard materials.

★High Performances: Thicker center to avoid vibrations and wobbling. Stiffening flange in centre ensures straight cuts.

Product 1: Huge 4-1/2” cut depth and adjustable blade guard for easy vertical & horizontal cutting

Product 1: Water fed dust suppression in accordance with OSHA regulations

Product 1: Powerful 15A Electric Motor. No pull chords, no fuel & no servicing!

Ideal for cutting Non ferrous metals such as aluminum, brass, copper, bronze and more as well as plastics, Plexiglas, PVC, Acrylics & fiberglass.

Ultra sharp, hard titanium carbide. Triple Chip Tooth Grind.

Equipment use with circular saw, miter saw, table saw, radial arm saw, etc.

Universal for dry or wet cutting.

This product is a hot-pressed sintered saw blade, which has a longer service life.

Performance segmented blade provide fast cutting speed and wide universality.

Size: Diameter 300mm(12 Inch), Diamond height 10mm, Segment thickness 2mm. Bore 25.4mm, with a washer of 20mm, fits 1 inch arbor or 4/5 inch arbor.Grit: #60/70.

Machine: Suitable for tile saw,ect.Recommended RPM:3000. Maxmium RPM:5000. Please note whether the diameter of the product bore matches the diameter of the machine aobor.

More efficient: X mesh turbo rim segments design helps cool the segments and bring the dust out,so that it can get more efficient and better performance.

CUTS THE TOUGHEST MATERIALS: Our 4 1/2" diamond blades for angle grinders are constructed with the highest precision so our diamond saw blades cut through porcelain tile, roof tile, brick, concrete, granite, marble, ceramic & masonry.

LONG LIFE: Built from high carbon steel with a diamond outer ring, our 4 1/2 inch diamond tile saw blades provide one of the longest lifetimes in the industry. Our grinder saw discs are diamond impregnated to minimize vibrations and breakage.

TURBO PACK FOR OPTIMIZED PERFORMANCE: Our 4 1/2 inch diamond blade & tile blade turbo pack includes 3 turbo tile blade & concrete saw blades 4 inch. These saw diamond blades ensure you have the right disc for the job.

SPECIFICATION: Diameter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor.

UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water.

WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen.

Prodcut Name:6 inch lapidary blade 1/2 inch arbor， 6 inch Diamond Cutting Blades Lapidary Thin Rim,lapidary trim saw blades

Outside Diameter:150mm (close to 6"); Arbor hole:12.7(close to 1/2"), Quantity:5 Pcs.

Thickness: 0.02"(0.5 mm) core thickness / 0.021"(0.53 mm) on the edge where the diamond is

The meticulously designed segmented rim, engineered with an emphasis on speed, makes for the fastest cut at the highest value on the market.

Our segmented blade rapidly cuts through cement, pavers, concrete with rebar, natural stone, and other tough materials.

Every TRABO blade is embedded with high-quality diamonds to provide a professional grade cut at an impressively low price.

Product Name: 12 inch lapidary saw blade, lapidary trim saw, 12" gem saw

Outer diameter: 12"(300mm); Arbor hole: 5/8"(16mm); Core thickness: 0.047"(1.2mm)

Performs well in cutting most types of rock, from soft petoskey stone fossils to hard jasper

📀【Angle Grinder Blades】3Pack 115mm (4.5inch); Arbor size: 7/8 inch(22.2mm) Multi-purpose angle grinder saw blade, they are used to masonry, tile, metal, stainless, aluminum, PVC, ceramic, wood, wood nails, plastic, steel, plaster, laminate, parquet (hardwood), aerated concrete, plasterboard etc.

📀【Diamond Saw Blade】Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core, creating an unbreakable and extremely heat resistant segments. Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco.

📀【Carbide Multi Grinder Blades】The angle grinder carving disc has high-quality tungsten carbide grit that protrudes beyond the plane of the cutting wheel body, generally used for cutting wood with nails, plastic, laminate, wall tiles, colored metal, PVC gypsum board, sanding board, fiber material, etc.

【Specifications of 12" Diamond Saw Blades】 Segment height 10mm. Arbor 1 inch -20mm . Size is 12 "x.125 "x 10mm. MAX RPM 5095 r/min.

【Diamond Sand】 The high density of emery makes the 12 diamond blade concrete tip super hard to maximize cutting life while reducing cost per cut.

【Wet and Dry】 12 in saw blade diamond blade dry cutting can ensure a smooth cutting effect, while the wet cutting can let you enjoy the same feeling as cutting butter.

Strengthened high carbon steel body: Maximum structural strength, improved hardness. Prevents breakage in rough working conditions.

Carbide-tipped blade: Razor sharp cut, maximum performance. 2 TPI (tooth per inch) design, precisely forged to produce consistent cutting results.

Widely applicable: Cuts various types of bricks, concrete, limestone, cement composite boards and hard materials with ease. We don't recommend cutting stones and tree branches due to lack of efficiency.

Size:300(12")x 10 x 3.2 x 25.4 mm (Diameter x Segment Height x Thickness x Hole)

Professional qualtiy, very fast cutting,work greart for Marble, Granite, Pavers,Brick, Block, Stone, Concrete and more

Segmented rim blades are laser welded with heat treated steel bodies which provides increases durability and long life

【Cobalt Teeth】 M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works.

【Carbide Technology】 Up to 50x longer life than bi-metal reciprocating saw blades.

【Optimized Design】 Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance.

INCLUDES: 62 inch bandsaw blade (2 pieces) for POWERTEC, Ryobi, WEN, Grizzly, Skil and Sears Craftsman 9" Band Saw – suitable for most 62" long, 1/2" wide, 0.014" thick bandsaw blades

Quality: the band saw blade is made from premium, high grade carbon steel with heat resistance and weld

Design: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds

Wet/Dry Paver Cutting

Wet/Dry Paver Cutting

MK-99 4 1/2 Inch Turbo Rim

The Diamabrush 4.5” Concrete Tool is designed for use by both professionals and do-it-yourselfers that require fast, effective surface preparation and coating removal. Perfect for edge work or small rooms, the Diamabrush concrete hand tool’s patented design enables users to easily remove glues, mastics, epoxies, paints, thin-set, and other stubborn coatings

The Diamabrush hand tools require little pressure, avoiding unwanted ridge marks left in the concrete by other diamond tooling, yielding astounding results and perfect profiles achieved with every use.  It’s also ideal for removing yellow striping lines. 

Simple – Easy to use on all brands of exisiting 4.5”and 7” angled grinders with a 5/8” 11” thread.

Sharp Blade: Effortlessly tackle tile work with our sturdy turbo mesh rim blades.

Durable & Fast Cutting: Get more done with our high-performance diamond matrix that lasts longer and wears less.

Precise Cuts: Achieve precise cuts every time with our thick center and vibration-free design.