Best 3M Electrical Tape in 2026

PRIMARY ELECTRICAL INSULATION for all wire and cable splices rated up to 600 volts

PROTECTIVE JACKETING for high-voltage cable splices and repairs

BUNDLE & REPAIR; harness wires and cables

1 ) 10 rolls value pack, 7 mil thickness black vinyl electrical tape 3/4 in. x 66 ft. x 10 rolls

2 ) UL and CSA listed, industrial grade & premium quality, superior adhesion while insulating and protecting

3 ) 10 individually wrapped rolls store easily

Primary electrical insulation for all wire, cable splices and bus applications up to 600 volts

Used for protective jacketing on high voltage cable splices, repairs and harnessing wires and cables

Apply in half-lapped layers with some tension for a uniform wind and no tension on the last wrap

Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. Rosh approved and Halogen Free

High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs

No Residue after Peeling Off: Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity

Sold as 1 Roll.

Designed for use in pase identification, color coding of motor leads and piping systems, and for marking safety areas.

Has excellent electrical insulating properties, wraps smoothly, conforms well and holds over a wide range of temperatures.

Polyvinyl chloride (PVC) backing

Pressure-sensitive rubber-based adhesive

Compatible with solid dielectric cable insulations

Black Colored Electrical Tape

Economical, flexible, general purpose tape

For Protective jacketing. Harnessing. Bundling

11-mil thick white matte cloth gaffer's tape with rubber adhesive conforms well to irregular surfaces for labeling, and temporary securing and sealing applications

Adhesive removes cleanly from most surfaces

Tape resists abrasion and can be torn by hand

【Double Sided Mounting Tape】This thin double 3M tape is 33ft in length, 0.4 inch in width and thickness is 0.88mm. The delicate size is ideal for mounting LED strips, pictures frame, posters, and DIY crafts. It can be used to replace rivets, screws, spot welds, and messy liquid adhesives.

【Heavy Duty Tape】Consists of acrylic foam, which strength is 3lb per inch. Super elasticity can be extended according to your requirements without break. Affected by special pressure-sensitive materials, the initial viscosity of the tape is relatively small. The viscosity will gradually increase over time and reaches a maximum after 72 hours. You can freely mount large or heavy objects.

【Waterproof and Temperature Resistance】: Excellent water and moisture resistance once the curing process is done. Perfect for kitchen or bathroom, can resist high temperature, heavy rain, rub, suitable for indoor and outdoor use. For example, it will not fall off if it is attached to the car window in summer or winter.

COMPATIBLE: Can be used on indoor and outdoor connections and with solid dielectric cable insulations.

PROTECTS: Insulates and seals out moisture with self-fusing design.

SAFETY STANDARD: UL Listed, File E129200.

Flexible film repairs flat or curved lenses on truck and car taillights and signal lights

Weatherproof and airtight seal helps block rain, snow and dirt, protecting electrical components

Quick and easy-to-use adhesive film is less expensive than replacement lenses

【Double Sided Mounting Tape】- Our double-sided tape is 23 feet in length, 0.6 inch in width, and 0.03 inches in thickness. It can replace traditional mechanical fasteners or liquid adhesives, eliminating the need for drilling, grinding, refinishing, screwing, welding, and cleanup.When peeled off, it leaves no residue, saving time and effort while maintaining a clean and neat appearance.

【Flexibility and High Elasticity】- The core of our adhesive tape is made of foam, using a unique closed-cell foam structure that provides excellent shear strength and tear resistance. With over 30% elongation, the two sided tape can be easily cut and stretched according to your needs. The flexibility of the foam core allows it to fill uneven surfaces, increasing the bonding area and providing a stronger adhesive effect.

【Waterproof and Temperature Resistant】- The closed-cell foam structure of the 2 sided tape forms a permanent seal, effectively protecting against water, moisture, and environmental erosion. It can be used in bathrooms, kitchens, and other wet environments. Our wall tape uses acrylic adhesive, known for its excellent weather resistance, maintaining good adhesion from 150°F heat to -40°F cold, making it suitable for both indoor and outdoor use.

PROFESSIONAL GRADE SLATE BLUE DUCT TAPE – Outdoor, UV-tolerant duct tape maintains versatile performanc when exposed to the elements. Ideal for tough, demanding applications in the construction, electrical, HVAC, industrial, marine and plumbing markets

REMOVES CLEANLY FOR UP TO 6 MONTHS – Whether indoors or outdoors, removes from most opaque surfaces with no adhesive residue for up to six months even after sun and weather exposure

STICKS IMMEDIATELY – Thick rubber adhesive attaches well to masonry and other rough surfaces, while cloth-reinforced backing resists curling and conforms to curved and irregular surfaces

INSULATES AND PROTECTS against abrasion and moisture

PROTECTIVE JACKETING up to 600V splice insulation

PRESSURE-SENSITIVE RUBBER-RESIN ADHESIVE and PVC backing for electrical and mechanical protection

INSULATES AND PROTECTS against abrasion and moisture

PROTECTIVE JACKETING up to 600V splice insulation

PRESSURE-SENSITIVE RUBBER-RESIN ADHESIVE and PVC backing for electrical and mechanical protection

Assorted Colors Equivalent to 3M/Scotch 35

Includes 1 roll each of black, red, white, green and yellow

Temp rating up to 105 deg C (220 deg F)

35 is 3M's model # for this tape (they also offer models such as 22, 33+ and 88 in their electrical tapes). 8 or 9 different colored rolls come in the pack depending on which one is purchased.

3M 35 Color Coding Electrical Tape is a premium quality, 7-mil thick electrical insulating tape. Each roll is either 1/2 inch wide x 20 feet long or 3/4 inch wide x 66 feet long depending on the pack purchased.

Flame-retardant, weather-resistant; resists UV rays, abrasion, moisture, alkalies, solvents, many acids. For indoor and weather-protected outdoor applications. Stretches to conform to virtually any shape that requires color-coded insulation. Outstanding electrical and mechanical properties make 3M 35 is excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas.

Made with expansive vinyl material that has good stretch characteristics which offer long-lasting insulation.

Comes in a 60 feet long roll with 7 mil thickness, ¾ inches width, and rated for 600V that is perfect for all protection jacketing and bundling applications.

Great for repairing broken cables, winding wire, and for transformers, motors, capacitors, voltage regulators insulation protection.

Polyester Film Tape: flame-retardant tape with high dielectric strength and acrylic adhesive is designed for electrical insulations. The thin tape is highly useful for insulations with dimensional restrictions

Applications: the bonding tape is suitable at places where cleaning solvents and mineral oil are in close contact. This tape is often used as outer wrapping on capacitors and coils

High Resistance: polyester tape is solvent resistant with thermosetting to ensure perfect sealing in locations with cleaning solvents, water or oil. Designed to sustain flagging, this sealant has long-term aging characteristics

20 PIECES 3M 60 Feet Black Electrical Tape

It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable.

Primary electrical insulation for all wire and cable splices rated up to 600 volts.

Sold as 1 Roll.

The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk.

Pressure-sensitive rubber based adhesive.

Crepe Paper Tape: Crafted with high-quality crepe paper, this masking tape ensures strong adhesion and resists lifting or curling

Applications: The bonding adhesive is suitable for light-to-medium duty applications which includes wrapping electrical cords or air hoses and bundling parts and other light industrial items

Masking Tape: Natural colored crepe paper tape with rubber adhesive is a pressure-sensitive tape designed for indoor applications. It ensures easy handling without slivering

Brand Name Colored Electrical Tape - Not a Cheap Generic Import - Full Length Rolls: 60 Feet! Other similar colored electric tape is only 20 ft.

10 PACK: Includes 10 Rolls, 10 Colors, Electrical Tape, One of Each Color: Black, Red, White, Yellow, Green, Blue, Purple, Orange, Gray and Brown

Resistant to Acids, Alkalis, Chemicals, Oils, Moisture, Sunlight & Corrosion - Lead Free, Perfect For Electrical Repairs, Bundling, Crafts And Color Coding

3M Scotch #35 Electrical Tape, White, .75-Inch by 66-Foot by .007-Inch

Great for phase identification, color coding of motor leads and piping systems and for marking safety areas

Abrasion, weather and flame resistant

Used for heavy duty air and oil filled transfer applications

Suitable for reinforcing, holding, separating, insulating, bundling and covering

Solvent resistant without thermosetting

Anisotropic (z-axis) electrical conductivity

Electrically connects and mechanically bonds medium pitch flex circuits with other flex circuits, pcb or lcd screens

Adheres to EMI/RFI substrates: aluminum, stainless steel and smooth gasket material

3M 1318 Tape is especially suited for applications such as wrapping coils, capacitors, wire harnesses, transformers, shaded pole motors and fractional horsepower motors.

It offers good wet grab, excellent shelf life, smooth, even unwind and is suitable for printing.

It consists of materials that are represented in many UL Recognized Insulation Systems and has a UL 130 dergree Celsius temperature rating.

3M 1350F Tape is especially suited for applications such as wrapping coils, capacitors, wire harnesses, transformers, shaded pole motors and fractional horsepower motors.

It also offers excellent flagging and solvent resistance; good wet grab; smooth, even unwind and is suitable for use on automated equipment.

It consists of materials that are represented in many UL Recognized Insulation Systems and has a UL 130 dergree Celsius temperature rating.

Polyester Film Tape: double coated permanent bonding tape with a high initial adhesion adheres to materials with high and low surface energy. This double-coated tape has anti-lifting properties with excellent holding power

Acrylic Adhesive: adhesive transfer tape features 3M 300LSE acrylic laminating adhesive. Film carrier tape can be used to add dimensional stability, firmness, and stability to foams, polyethylene, polypropylene, and other oily or powder coated surfaces

Utility Range: high-strength bonding tape offers applications in medical, automotive, aerospace, appliances, electronics, and other manufacturing industries. It bonds to bare metals, paper, glass, ABS and polycarbonate substrates

Conductive Foil Tape: the copper foil tape is an industrial grade electrically conductive metal foil tape that facilitates soldering and resists oxidation and discoloration. The tape works well for cable wrapping, wrapping heavy motor

Function: the flame-retardant tape has dead soft copper foil backing and is pressure sensitive. The embossed pattern cuts through the adhesive layer to establish a reliable contact between the copper backing and substrate

Application: the embossed copper foil tape is typically used for grounding, RFI/EMI shielding and static charge draining applications requiring good electrical conductivity