Best Electrically Conductive Adhesives in 2026

ADEQUATE COPPER FOIL TAPE - Each roll is 50mm x 10m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

ADEQUATE COPPER FOIL TAPE - Each roll is 50mm x 20m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

ADEQUATE COPPER FOIL TAPE - Each roll is 75mm x 7m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

FOR CONTAMINATED SURFACES: EternaPrime also prepares most contaminated surfaces for tape application by coalescing all loose particles into a solid platform for the EternaBond tape to adhere to

SUPERIOR PRIMER: EternaPrime doubles as an excellent primer and conditioner for use with a variety of products such as self-adhered modified bitumen membranes

BONDS TO DIRTY SURFACES: Use EternaPrime when surfaces to be bonded are very dirty (oxidized and cannot be easily cleaned), or dusty (like on a tar and gravel roof)

[EMI & RF Shielding] Shielding electric guitar avoid interference caused by ineffective conductive shielding paint,shield the pickup and control cavities of a guitar.Prevent radiating and interfering or causing safety issues.

[Electrical Circuit] Double side conducting tape means both sides are highly conductive material with low resistance perfect for solder,birthday light card,paper circuit or repair such as LCD monitor mobile phone.

[Slugs & Snails] The edge can be cut using pinking shears to shape up the slug barrier,dual-sided 99.95% pure copper improves the effectiveness,keeping garden plants,flowers and vegetables safe.

Complete kit for a quick repair

Quickly and easily bonds defogger tab to grid on rear window

Typical applications include rear window defogger tabs

Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100

Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan

Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4

Copper tape plays a key role in reducing annoying electrical interference and making your tone perfect. It's a much better solution than graphite and aluminium tape. So, whether you're a beginner or professional, copper tape applied to your guitar can improve your sound quickly.

Pure copper foil, low resistance adhesive and an easy peel waxed paper backing makes our tape the best on the market.Cooper tape as Crafts for people, It is the best choice for safety and fun .

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables. Easy to shape and mould with a strong adhesive it sticks to almost any clean surface.

Dual Conductive Copper Tape - Dual-conductive copper foil tape is more functional than single-sided copper tape. You don’t need to worry that the adhesive tape will reduce the effectiveness between components because the current will flow through both side and the adhesive of foil tape. Great copper tape for slugs, paper circuits, electrical repairs, soldering and grounding.

High-quality Foil Tape - Vaincre copper tape is made of premium conductive adhesive and copper material. With a strong adhesive, this copper foil can firmly sticks to almost any clean surface. Copper tape conductive adhesive is easy to peel off and tore so you can can use them by hand. The copper foil tape also can be twisted and bent, making it easy to shape. 2 inch X 66 FT conductive tape is enough for a few different projects.

EMI Shielding Copper Foil Tape - Vaincre copper tape provide an economic EMI shielding solution for a variety of applications. The copper foil can protect your electronic devices from electromagnetic interference. This cooper tape conductive adhesive does the good job on mobile phone, computer, printer, PDA, PDP, etc. This copper strips also is a great copper shielding tape for guitars. The metal tape can eliminate the buzz and noise, making your guitar tone perfect.

Thermal conductivity of 0. 8 W/(m·K)

1:1 mix ratio

Working life: 4 minutes, set time: 15 minutes

Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP

Mechanical Properties Hardness, Shore D 87 Lap Shear Strength 2000 psi Lap shear

CTE, linear 30.6 µin/in-°F At 68 °F Max Service Temp Air 284 °F, Min Service Temp -94°C

Comes in Easy Mix 1 to 1 10ML Cartridge

Comes with Two Mixing Tips for two separate uses. More tips can be purchased from our web site

Very Strong Bond and High Temperature Tolerance

Dual Conductive Copper Tape - Dual-conductive copper foil tape is more functional than single-sided copper tape. You don’t need to worry that the adhesive tape will reduce the effectiveness between components because the current will flow through both side and the adhesive of foil tape. Great copper tape for slugs, paper circuits, electrical repairs, soldering and grounding.

High-quality Foil Tape - Vaincre copper tape is made of premium conductive adhesive and copper material. With a strong adhesive, this copper foil can firmly sticks to almost any clean surface. Copper tape conductive adhesive is easy to peel off and tore so you can can use them by hand. The copper foil tape also can be twisted and bent, making it easy to shape. 1 inch X 66 FT conductive tape is enough for a few different projects.

EMI Shielding Copper Foil Tape - Vaincre copper tape provide an economic EMI shielding solution for a variety of applications. The copper foil can protect your electronic devices from electromagnetic interference. This cooper tape conductive adhesive does the good job on mobile phone, computer, printer, PDA, PDP, etc. This copper strips also is a great copper shielding tape for guitars. The metal tape can eliminate the buzz and noise, making your guitar tone perfect.

Adhesives & Sealants

Country of manufacture: United States

Manufacturer: Rust-Oleum

Advanced Technology: Our Proprietary Graphene filler keeps the excellent performance of the silver conductive epoxy at more affordable price

Our G6E-FXSG electrically conductive adhesives stay flexible even after curing

Excellent electrical conductivity: Volume resistivity: ≤ 0.0005 Ω·cm

Electrical resistivity: 0.006 Ω·cm, Thermal conductivity: 1.3 W/(m·K).

Continuous service temperature range from -40 to 150°C (-67 to +302°F )

Working time of 4 hours, Heat is required for proper cure (2 hours at 65°C)

Appearance: Amber

Cure Type: Heat cure or Room Temperature

Benefits: Low viscosity easily mixed effective electrical insulator low permeability to gasses and vapors

ADEQUATE COPPER FOIL TAPE - Each roll is 25mm x 20m x 2; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

Thermal conductivity of 0. 8 W/(m·K)

1:1 mix ratio

Working life: 4 minutes, set time: 15 minutes

Viscosity At 25 °C cps Paste, Silver coated ceramic 50-75 %, Pot Life At 25 °C 30 minutes

Mechanical Properties Hardness, Shore D 81, Compressive Strength, psi 13,600

Volume Resistivity less than 0.0015

Viscosity At 25 °C cps 6,900, Silver coated ceramic , % 65 to 75

Appearance Silver, Cure Type Heat cure

Sheet Resistivity less than 0.1 ?/sqcm, Lap shear strength 2000 Lb/in2