Best Atom Adhesives in 2026

Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100

Mechanical Properties Hardness, Shore D 83 Adhesive

Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002

Best for Most Electronics Applications. For greater conductivity use AA-DUCT 902

Easy to use: Single Use Pouch. Mix in packet and use.

Unbeatable Strength. Bonds well to glass, metals, fabrics, wood and many other substrates

Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100

Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan

Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4

Viscosity 200,000 Cp, Shelf Life 4 months At 25 °C 6 months refrigerated

Mechanical Properties Hardness, Shore D 83, Appearance Silver

Volume Resistivity ohm cm equal 0.001

Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100

Mechanical Properties Hardness, Shore D 83 Adhesive

Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002

Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP

Mechanical Properties Hardness, Shore D 87 Lap Shear Strength 2000 psi Lap shear

CTE, linear 30.6 µin/in-°F At 68 °F Max Service Temp Air 284 °F, Min Service Temp -94°C

Viscosity At 25 °C cps Paste, Silver coated ceramic 50-75 %, Pot Life At 25 °C 30 minutes

Mechanical Properties Hardness, Shore D 81, Compressive Strength, psi 13,600

Volume Resistivity less than 0.0015

Spec. Gravity 0.900 g/cc Cured Water Absorption 0.30 % After 24 hours, Viscosity 4500 cP After mixing

Hardness Shore D 80 Adhesive Bond Strength 2000 psi Lap 24 hrs At 25°C , 3400 psi 4 hrs At 65°

Electrical Properties Volume Resistivity 1.20e+14 ohm-cm Glass ,Transition Temp, Tg 96°C

Viscosity At 25 °C cps 6,900, Silver coated ceramic , % 65 to 75

Appearance Silver, Cure Type Heat cure

Sheet Resistivity less than 0.1 ?/sqcm, Lap shear strength 2000 Lb/in2

ADEQUATE COPPER FOIL TAPE - Each roll is 50mm x 10m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

Strong Adhesive - Kirecoo copper tape [2inch, 33FT], The copper foil tape conductive adhesive is super sticky and is protected with an easy peel backing which make it can be used on most surfaces & is able to withstand all weather conditions.

Highly Conductive - Our copper foil uses a highly conductive material with low resistance, has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the copper tape conductive adhesive will reduce the effectiveness between components, making our emi shielding foil a excellent option for electrical projects, repairs and even paper circuits. Excellent alternative to conductive paints.

EMI & RFI Shielding - This copper foil tape with conductive adhesive Shielding electric guitar to avoid interference, shield the pickup and control cavities of a guitar. Prevent radiating and interfering, making it an ideal guitar shielding tape option. Perfect for any guitar builder/ luthier.

ADEQUATE COPPER FOIL TAPE - Each roll is 75mm x 7m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

ADEQUATE COPPER FOIL TAPE - Each roll is 50mm x 20m; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

ADEQUATE COPPER FOIL TAPE - Each roll is 25mm x 20m x 2; Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully.

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables.

EMI SHIELDING COPPER FOIL TAPE - The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference.

FOR CONTAMINATED SURFACES: EternaPrime also prepares most contaminated surfaces for tape application by coalescing all loose particles into a solid platform for the EternaBond tape to adhere to

SUPERIOR PRIMER: EternaPrime doubles as an excellent primer and conditioner for use with a variety of products such as self-adhered modified bitumen membranes

BONDS TO DIRTY SURFACES: Use EternaPrime when surfaces to be bonded are very dirty (oxidized and cannot be easily cleaned), or dusty (like on a tar and gravel roof)

Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100

Mechanical Properties Hardness, Shore D 83 Adhesive

Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002

Creates strong permanent electrical connections

Electrical resistivity: 1.8 x 10-3 Ω·cm, Thermal conductivity: 1.5 W/(m·K).

Use as a solder replacement or for bonding heat-sensitive electronic components. Cures at room temperature but heat cure is recommended to get the best possible conductivity

FEATURE: Industrial grade with extra thickness (3.15 mil foil and 3.15 mil backing), easier to manage and apply; conductive on both side with one-sided pressure sensitive rubber adhesive. LLPT Copper Foil Tape provides operational temperature from 14°F - 248°F; 99.9% purity; supreme resistance of flame, vapor, moisture, weather, cold, heat, oil, smoke, stays and so on. It stays great conductive efficiency, high stability and strength for long life support.

APPLICATION: LLPT Copper Foil tape is an essential item to be had for household DIY craft projects, electrical repairs, soldering, circuit simulation, home decoration, EMI/RFI shielding, grounding, removing buzz from guitar, making crafty, metallic gifts and etc for both outdoor and indoor.

DUAL CONDUCTIVE TAPE: Dual copper foil tape means that the rubberized surface is conductive, and the other side of the copper itself is also conductive, so it is called double-conductor or double-sided conductive. There is also a double-sided rubberized copper foil tape for processing with other materials into a relatively expensive composite material, and the double-sided rubberized copper foil is also electrically conductive and non-conductive.

PACKAGE CONTENT: Package comes with 2 rolls of copper foil tape for stained glass, Great copper foil tapes for DIY crafts

DUAL CONDUCTIVE TAPE: These double-sided copper foil tapes are made of pure copper foil material with strong adhesive, so the current will flow through both sides of the tapes

PERFECT SIZES: The copper tape is approx. 1/4” in width and 25 yards per roll. Ideal size for paper circuits, EMI shielding, electrical repairs and even DIY craft projects

Non-Electrical Conductive,Non-corrosive ,Non-toxic,Suitable for all heatsink without fixed clip. It has heat conducting properties, strong adhesion. Helps disperse the heat from Chipset to heatsink effectively.

Use for MOSFET, LED, heat sinks , North-south bridge, video card, Chipset, heat dissipation part, heat dissipation, electrical appliances, instruments and other industries.

It has good thermal conductivity and wide service temperature range(-60~250 degrees Celsius)

[EMI & RF Shielding] Shielding electric guitar avoid interference caused by ineffective conductive shielding paint,shield the pickup and control cavities of a guitar.Prevent radiating and interfering or causing safety issues.

[Electrical Circuit] Double side conducting tape means both sides are highly conductive material with low resistance perfect for solder,birthday light card,paper circuit or repair such as LCD monitor mobile phone.

[Slugs & Snails] The edge can be cut using pinking shears to shape up the slug barrier,dual-sided 99.95% pure copper improves the effectiveness,keeping garden plants,flowers and vegetables safe.

[Stained Glass Makers] Deep metallic copper color with strong adhesive perfect for edging stained glass,jewelry making,and other home art decorative project.

[Electrical Circuit] Double side conducting tape means both sides are highly conductive material with low resistance perfect for solder,birthday light card,paper circuit or repair such as LCD monitor mobile phone.

[EMI & RF Shielding] Shielding electric guitar avoid interference caused by ineffective conductive shielding paint,shield the pickup and control cavities of a guitar.Prevent radiating and interfering or causing safety issues.

Soldering Gun in a Jar Wire glue-the solution when you can't find the soldering iron, don't want to bother, are out in the woods, don't quite trust a fifth-grader with a hot gun, can't reach the connection with both hands, whatever. This stuff conducts low voltage AC and DC circuits in a permanent bond and is easy to use. Our high-tech support group suggests that a toothpick is a good way to apply it. Cures overnight. Our each is a 0.3 oz/9ml jar.

Best for Most Electronics Applications. For greater conductivity use AA-DUCT 902

Easy to use: Single Use Pouch. Mix in packet and use.

Unbeatable Strength. Bonds well to glass, metals, fabrics, wood and many other substrates

Operating Temp: –50 to +170°C

Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100

Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan

Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4

Copper tape plays a key role in reducing annoying electrical interference and making your tone perfect. It's a much better solution than graphite and aluminium tape. So, whether you're a beginner or professional, copper tape applied to your guitar can improve your sound quickly.

Pure copper foil, low resistance adhesive and an easy peel waxed paper backing makes our tape the best on the market.Cooper tape as Crafts for people, It is the best choice for safety and fun .

ADHESIVE TAPE WITH GOOD FLEXIBILITY - The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables. Easy to shape and mould with a strong adhesive it sticks to almost any clean surface.

Dual Conductive Copper Tape - Dual-conductive copper foil tape is more functional than single-sided copper tape. You don’t need to worry that the adhesive tape will reduce the effectiveness between components because the current will flow through both side and the adhesive of foil tape. Great copper tape for slugs, paper circuits, electrical repairs, soldering and grounding.

High-quality Foil Tape - Vaincre copper tape is made of premium conductive adhesive and copper material. With a strong adhesive, this copper foil can firmly sticks to almost any clean surface. Copper tape conductive adhesive is easy to peel off and tore so you can can use them by hand. The copper foil tape also can be twisted and bent, making it easy to shape. 2 inch X 66 FT conductive tape is enough for a few different projects.

EMI Shielding Copper Foil Tape - Vaincre copper tape provide an economic EMI shielding solution for a variety of applications. The copper foil can protect your electronic devices from electromagnetic interference. This cooper tape conductive adhesive does the good job on mobile phone, computer, printer, PDA, PDP, etc. This copper strips also is a great copper shielding tape for guitars. The metal tape can eliminate the buzz and noise, making your guitar tone perfect.

Viscosity 200,000 Cp, Shelf Life 4 months At 25 °C 6 months refrigerated

Mechanical Properties Hardness, Shore D 83, Appearance Silver

Volume Resistivity ohm cm equal 0.001

Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100

Mechanical Properties Hardness, Shore D 83 Adhesive

Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002