Best Tangkula Enclosures in 2026

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Screw pack included to mount the drives

Quick and easy installation

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.

Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives

Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1

Supports all 2.5 and 3.5-inch SATA drives

Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0)

UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system

Compatible with any 2.5-Inch SATA hard drive or Solid State drive

Fits all 3.5-Inch SATA drive bays

Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives

CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.

DESIGN: Water Resistant and fully compliant with the IP67 specification. Sealed against harmful dust.

COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2242/2260/2280.

This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds.

Plug and play no drivers required.

Exclusively designed for M.2 NGFF SATA SSD B or B+M Key.

CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.

DESIGN: Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.

COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2230/2242/2260/2280.

Hot-swappable, plug and play, no drivers needed.

Supports 50mm and 25mm mSATA hard drives

Hand held, Pocket Size, Easily Portable!

Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.

Ultra Light Aluminum Case provides heat dissipation.

LED light indicates Power and Activity status.

Specially Designed for SABRENT models: EC-UK25 / EC-US25 / EC-UK30 / EC-UM30

Hot-swappable, plug and play, no drivers needed.

Supports Standard Notebook 2.5″ SATA Hard Drives.

Supports Standard Notebook 2.5″ SATA Hard Drives.

Ultra Light Aluminum Case provides heat dissipation.

LED light indicates Power and Activity status.

Note: It doesn’t support SSD M.2 PCIe NVMe or SSD M.2 PCIe AHCI [Support only M.2 SATA]. Pls check your M.2 SSD type before place order.

Compatible with M.2 SATA [NGFF] SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays.

Convert an M.2 SATA NGFF solid-state drive into a Standard 2.5'' SATA III 6Gbps SSD. Added protection for your SSD with enclosed housing.

Supports Standard Desktop 2.5"/3.5" SATA Hard Drives.

Keep your drives running cool, with Built-in cooling fan.

Hot-swappable, plug and play, no drivers needed.

Note: It doesn’t support M.2 NVMe PCIe SSDs

Hand held, Pocket Size, Easily Portable!

Speeds up to 5Gbps with 3.0

Added protection for your SSD with enclosed housing.

Convert an m.2 NGFF solid-state drive into a Standard 2.5'' SATA III 6Gbps SSD.

Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays.

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive

Connect your SATA / IDE device to your computer through a USB port

Super-Speed USB 3.0 interface

Ultra Light Aluminum Case provides heat dissipation.

Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.

70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk.

USB 3.1 high-speed supports up to 10Gbps data rate

Hot-swappable, Tool-free HDD Installation, plug and play, no drivers needed.

Supports all 2.5 and 3.5-inch SATA drives up to any capacity (8TB+).

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Connect a 2.5in SATA hard drive to your computer using a portable cable with UASP Support

Quick and easy installation

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Compatible with all types of SATA hard drives. Including SSD DRIVES!!!

Quick and easy installation

Supports Standard Desktop 2.5" or 3.5" SATA Hard Drives.

High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more

Hot-swappable, plug and play, no drivers needed.

Connect a 2.5in SATA hard drive to your computer using a portable cable with UASP Support

Convert any 2 2.5" Hardrive into a 3.5" drive bay

USB 3.1 high-speed supports up to 10Gbps data rate

Use your SSD or mechanical disks in single mode or in a RAID array. Supports RAID 0, 1, JBOD (sequential), and single mode.

Compatible with 2.5” and 3.5” SATA III disks (backward-compatible with SATA I and II). Locking key included to prevent the accidental removal of the HD trays during operation.

Fast and reliable USB Type-C interface with a transfer speeds of up to 1000 MB/s. Built-in cooling fan for temperature control helping to extend the lifespan of the disks.