Best Angle Simple Faucet Parts in 2026

Stainless steel face and plastic body prevent rust.

Size: 1.77'' width x 0.75'' long nipple. Please kindly check its size before buying.

Thickness of sink should be LESS than 0.4 inch. (This is NOT long enough for granite counter tops.)

Leak-proof cover: the hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

Easy to install: longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

Stainless steel material: filled the hole in the granite, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures, not a heavy metal but it works as

Material: our sink faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime.

Advantages: quick and easy installation without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak. Simple and generous design, make your kitchen look beautiful.

Size: our faucet hole cover is the standard size for most homes; This is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (This is not long enough for granite counter tops), please check the size before purchase.

☑【RINSE RESIDUE QUICKLY】:The bottle washer features 9 high-pressure powerful water jets to thoroughly rinse residue in seconds. Gently press, clean as new! The sloped design of the cup washer base directs water to the kitchen sink, preventing standing water.

☑【WIDE APPLICATION】:The faucet glass rinser conveniently rinses virtually any drinkware that opening size is between 0.6 to 4.2 Inches in diameter. Such as wine glasses, champagne glass, baby bottles, travel cups, coffee mugs, latte cups, sports bottles,etc. Great for home kitchen, bar, cafe, resturant, hotel sink.

☑【DIY REPLACEMENT FOR】:The cup washer for sink is the simple DIY replacement parts for a soap dispenser, kitchen sprayer or sink hole cover. If there is no hole in your countertop, please make sure the mounting holes are in the correct position before installation (please refer to picture 7 for installation requirements).

Stainless steel: this faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime

Easy to install: just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak

For use in: faucet hole cover is standard size for most households; Please check its size before purchasing, this suitable for hole size between 1.1 to 1.7 inch, thickness of sink should be less than 0.25 inch

MATERIAL - The kitchen faucet hole cover is made of stainless steel and ABS,which is durable

LEAK PROOF COVER - The sink hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

EASY TO INSTALL - Longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

[High Quality]- AA Faucet high quality bar sink drain made from stainless steel construction which is built to last for commercial usage.

[Perfect For Bar Sink]- 3-¼” Pipe Length. Perfect for bar and prep sinks for preventing unwanted debris and foreign objects from slipping down the drain.

[Thread Size]- 1” Nominal Pipe Size (ID) Inner Diameter, 1” NPS Thread.

Simple DIY replacement for a sink sprayer, soap dispenser or sink hole cover

Can rinse most standard drinkware including wine glasses, baby bottles, and travel cups

Minimum drinkware opening size is 1 in. in diameter and maximum drinkware opening size is 3.6 in. in diameter

Material - The faucet hole cover is made of durable stainless steel face and plastic system to prevent rusting and will not fade for long term use.

Easy to Use - Just put the cover across the faucet hole and go under the sink to tighten the bottom screw, easy to install the faucet hole cover without any tools. It covers the water spray hole without tools and comes with a rubber gasket for a good seal that won't leak; a simple and generous design that makes your kitchen more beautiful.

Faucet Plug Size- 2 x 0.4inch; Screw Size (DxL): 0.5 X 2.28inch. The faucet hole cover is a standard size for most homes. Please check the size before you buy.

Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。

Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying.

Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage.

【Sufficient weight】Sufficient weight ball keep the spray shower head go back quickly.

【Suitable for Φ12mm and Φ14mm hose】This weight ball is suitable for the Φ12mm (0.47 inch) nylon braided hose and Φ14mm (0.55 inch) stainless steel hose.

【Screw locking structure】Reliable, easy to install and disassemble.

SUS304 STAINLESS STEEL BODY: Provides much higher performace (high heat- resistance and pressure-resistance) and durability. It can serve many years without leakage.

INDUSTRY LEADING FINISH TECHNOLOGY: Build to resist scratches, corrosion and tarnishing

EASY INSTALLATION: No Tools Needed, easy to install. Universal G1/2 Connection (20.5mm/0.8''), fits most common faucet pull down hoses. If you're not sure if this product fit with yours, you're welcome to enquire before placing order. Or you can measure your hose.

59-Inch or 1.5-Meter

Quality stainless steel outer tube, ensuring quality and longevity

Inner pipe made of non-toxic, ordorless EPDM material, high pressure resistance

✔ HIGH QUALITY MATERIAL - The sink tap hole cover is made of durable stainless steel and plastic, so please don't worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time.

✔ SUITABLE FOR HOLES IN 1-1.6 INCH - The sink tap hole cover is the standard size for most households; Suitable for hole sizes between 1 to 1.5 inches, the thickness of the sink should be less than 0.25 inch (for the small one) and 0.4inch (for the large one) please check the size before purchase.

✔ VERY EASY TO INSTALL - Quick and easy to install without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, comes with a rubber gasket for a good sealing, doesn't leak.

Material:Our sink tap hole cover are made of stainless steel and PP, very durable.

For use in: sink, soap liquid cover, decorative cover, washbasin.

Easy to install:just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak.

【Easy Installation】Installs Pull-out Spray Head with hose in minutes for the bathroom, without plumbers or tools. It fits any standard shower arm.

【Standard Hose】G 1/2 straight male thread fits most pull-out hoses. Please kindly check your faucet size before purchase.

【Multiple Function】 2 Different Functions. High Pressure Spray&Saturating Spray&Aquablade Spray

【Easy Installation】Installs Pull-out Spray Head with hose in minutes for the bathroom, without plumbers or tools. It fits any standard shower arm.

【Standard Hose】G 1/2 straight male thread fits most pull-out hoses. Please kindly check your faucet size before purchase.

【Multiple Function】 2 Different Functions. High Pressure Spray and Saturating Spray

Please check the your old strainer's size and make sure this is what you need

For the hole's size: Dia 1 ~ 1.4 Inch (26-36mm); Please measure your hole size's diameter before your buy.

Stainless steel + Plastic material prevents rust. Easy to install; Not for thick porcelain sink

Stainless Steel Material: different from the plastic material of screw rods on the market, the screws of this sink hole cover are made of quality stainless steel, with a 2 inch diameter of heavy duty brass plate, preventing your kitchen sink or toilet washbasin from accumulating water and causing rust to prolong service life

Reasonable Size: with 2.1 inch long handle, 2 inch cover diameter, 0.24 inch thread diameter design, the stainless steel sink hole cover is suitable for most kitchen sinks or bathroom washbasin holes; The thread part is long enough to place granite counters

No Need for Cement to Fix: we offer washer to fit the cover, and the faucet hole cover has a long screw end with a wing nut to secure it to the counter

【Premium Quality】Made of ABS material with electroplating finish, sturdy and durable, has a exquisite appearance.

【Safe and Durable】The water outlet of copper, stainless steel and silicone, excellent corrosion resistance, safe and durable to use.

【Three Functions】This sink sprayer head has 3 settings, stream, spray and pause. It adopts dual-mode water flowing type, including bubble type and shower type, you can adjust by pressing the button on the head of the sprayer.

PREMIUM MATERIAL - The sink hole cover is made of 304 stainless steel and ABS plastic material, anti-rust and anti-corrosion.

LEAK PROOF - The stainless steel sink faucet soap dispenser hole cover plays the role of decoration and anti-leakage.

WIDE APPLICATION - Universal sink hole decorative cover can be applied to stainless steel basin and ceramic basin.

★Made of high quality stainless steel, scratches, corrosion and tarnishing resistant

★There are two functions in one spray shower head

★Fit for most kitchen pull-out hoses

23.2-Inch or 59CM

High Quality, Can fit Oil Rubbed Bronze/Chrome/Brushed Nickel Faucet

G1/2" connector size , fits most spray heads.

【Durable stainless steel material】: Made with premium stainless steel, this sprayer head replacement is built to last and resist corrosion, ensuring long-lasting use for all your kitchen needs.

【Versatile 3-function spray head】: This pull-down faucet spray head offers three different functions, including a powerful jet stream, a wide spray pattern, and a pause mode, allowing you to easily switch between modes for different kitchen tasks.

【Easy to install on most standard pull-down faucets】: The Stainless Steel Sprayer Head Replacement is designed to fit most standard pull-down kitchen faucets and comes with all the necessary parts for easy and hassle-free installation.

2Pcs Sink Hole Plug Sink Tap Hole Cover Stainless Steel Kitchen Faucet Hole Cover Kitchen Sink Accessories for Home Kitchen Bathroom

Kitchen Faucet Hole Cover- Cover Size: About 4.5x1.4x1.4cm, easy to store without taking up too much space, it is the standard size for most families

Stainless Steel Kitchen Sink Tap Hole Cover- Just place the cover over the faucet hole, place under the sink and tighten the bottom screw

Stainless Steel Material: different from the plastic material of screw rods on the market, the screws of this sink hole cover are made of quality stainless steel, with a 2 inch diameter of heavy duty brass plate, preventing your kitchen sink or toilet washbasin from accumulating water and causing rust to prolong service life

Reasonable Size: with 2.1 inch long handle, 2 inch cover diameter, 0.24 inch thread diameter design, the stainless steel sink hole cover is suitable for most kitchen sinks or bathroom washbasin holes; The thread part is long enough to place granite counters

No Need for Cement to Fix: we offer washer to fit the cover, and the faucet hole cover has a long screw end with a wing nut to secure it to the counter

STAINLESS STEEL MATERIAL: Mainly constructed from stainless steel with a bright brushed smooth finish. The rustproof quality provides long lasting performance that is not easily damaged and has a long and durable life.

KITCHEN SINK HOLE COVER: Sink cover for top hole sink tap soap dispenser is decorative and leak proof, keeping the kitchen clean and tidy and protecting under sink cabinets dry and tidy.

PACKAGE: Mainly includes 3 pieces of brushed stainless steel kitchen sink hole covers, length 5.9 x 4.4cm/2.32 x 1.73inch