Best 90 Degree Elbow Fittings in 2026

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

1/2 INCH CLOSE NIPPLE - Our 1/2" black steel pipe nipple is a short length of cast iron pipe fittings with male pipe threads at both ends for connecting pipes and fittings. You can connect this NPT (national pipe thread) 1/2" inch nipple metal piping to 1/2" inch floor flanges, 90 degree elbows, tees, couplings, caps, etc.

RAW IRON: We use 100% top-quality raw material that assures high performance of our pipe decor industrial pipe fittings. Brooklyn Pipe has a wide range of available rang of decorative DIY pipe fittings that can help you with all your projects.

NO CHINA STAMP: Our Close Pipe Nipple doesn't have the word "CHINA" stamped into the close nipple which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market.

Sewer hose has superior abrasion resistance and crush protection

Includes pre-attached Rhino swivel fittings - bayonet and transparent elbow with 4-in-1 dump station fitting

Also includes snap-glue fittings and storage caps. 4-in-1 adapter allows storage in 4" square bumpers

Waste valve cap

Cap Size: 3" with capped 3/4" GHT

O.D.: 3.800"

✔SAVE HUGE: Our 1/2’’ x 60’’ Black Pipe is Ideal for Building an Industrial Table or Shelf with Less Hassle and Reduced Cost. Pipes Come In a few Sizes Purchase the Length You need

✔BRING VINTAGE BEAUTY TO YOUR HOME: Add the Rustic, Cozy, Old-fashioned Look to Any Room in Your Home. Buy this Pack of 5 Pipes to Create the Most Beautiful Industrial Tables, Furniture, Shelves, Banisters, or Any Other Ideas You May Come Up With.

✔SIMPLE INSTALLATION: No Skill or Experience is Needed to Create Masterpieces with Supply Giant Pipes and Fittings. These are Easy and Enjoyable to Assemble. Makes a Great Gift or Activity

SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!

PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.

AVOID COSTLY DOWNTIME: The perfect caps and plugs kit for the mechanic in you. These JIC kits seal and protect the ends of hydraulic hose and tube fittings to prevent hydraulic liquids from leaking onto the ground or into your or your client's machine. While you perform preventive maintenance, it also stops contaminants such as dirt, dust, moisture, and sand from entering and damaging your machine's sensitive and expensive parts, such as Pumps Motors, Valves, and Cylinders.

THIS IS NOT A TWIST ON STYLE - This has a 3" Hub o the reverse side which is a glue on style.

GLUE ON Waste valve with 3" cap

VALVES are interchangeable with Valterra, Grentec, Anonda, Larden & Bristol. With Plastic Handles.

64 FITTINGS---This 64-piece ORFS hydraulic cap and plug kit by Zelcan gives you plenty of fittings in the 6 most commonly needed sizes: ORFS 4, 6, 8, 10, 12, and 16.

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These ORFS caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.

Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis

Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access

Stainless steel 304 for resistance to corrosion and high temperatures

Fiber union gasket ensures fast installation

Durable construction ensures low maintenance and lifecycle costs

Inlet pressure changes with balanced design features to protect the system

This replacement hatch door and bracket measure 6” wide by 6” high by 2” deep and are made of durable plastic. The black color fits with the under-mount Super Tube body and is sized to fit the ends of the tube (not the center).

The lid latches closed for worry-free transportation and yet is quickly opened for easy access. With the sturdy end to the carrier tube, you have protection against dirt, debris, and pests. No one wants to get their sewer hose out only to find that it was damaged by the elements or pests.

With the latching door, you can make sure that the hose is still in good shape when you take it back out again. In addition to keeping the hose safe, you also keep your RV in good order by keeping the hose out of the way and your space comfortable by keeping any smells that may be there away from the living or recreation area.

EASY TO USE: Perfect solution for building bases and stands that need to be physically mounted to a surface. There is one deep socket on the cap, and the lower portion of the cap is entirely flat with three tabs, each with countersunk fastener holes. Easily insert the end of a 3/4 in. PVC pipe and then attach using three #10 screws or fasteners. Use corresponding anchors as necessary.

GENUINE FURNITURE GRADE PVC: Injection-molded using ultra-strong, premium furniture-grade PVC resin. This superior engineered plastic is designed for outdoor use and weatherability and can be used in direct sunlight. UV resistance maintains structure durability and appearance through years of exposure to varying weather conditions. Impact strength is five times as strong as other PVC cap products due to the formulated impact modifiers.

SAFE AND NON-TOXIC: Does not contain any heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-like table caps. Certified safe for use with children and pets.

WIRE PROTECTION — Provides strain relief to cables and wires passing through plates or connecting to electrical equipment. Outer Drill Diameter: 0.850"

EASY INSTALLATION — Simply pass your cable through the gland and tighten the cap. Fits 0.25" to 0.47" (6 - 12mm).

PROFESSIONAL LOOK — Black nylon cable glands are used by professionals everywhere.

【EASY INSTALLATION NO SOLDERING】: No soldering, clamps or glue required, just insert the pipe into the fitting deep enough by hands. Disconnect in seconds by using the Disconnect Clip. SUNGATOR pushfit end caps are removable and reusable. They can even be rotated after assembly for easier installation in tight spaces.

【PROFESSIONAL AND SAFE】: Certified & Compliant CUPC, ANSI/NSF-61, NSF-372, NSF-14, ASSE1061. SUNGATOR push fit fittings can withstand up to 200 PSI and 200°F.

【LEAD FREE BRASS】: High quality lead free brass for corrosion resistance, high temperature ductility, not easy to be broken, healthy and safe. Push-to-Connect plumbing PEX fittings can be used in Potable Water and Hydronic Heating Applications.

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Cap of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years.

HIGH QUALITY MATERIAL - This pipe cap is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use.

EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the cap, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws.

All-In-One Kit: Provides everything you need for a quick, reliable sewer hook-up

Fully Adaptable: Use it as either a 20-foot or 10-foot set-up

Includes: Includes (2) attachable 10-foot heavy-duty vinyl sewer hoses with pre-attached swivel fittings, (1) swivel translucent elbow fitting with 4-in-1 adapter, (4) storage caps and wire guards to protect your hands

Waste Valve Cap with Bayonet Hooks

3" Cap Size with Capped 3/4" GHT (Garden Hose) Hookup- Connects to all standard 3" Gate Valves

Includes Seals for Leak-Proof Connections

Size&Types: Size 1/2" 5 Way

Material & Standard: PVC, SCH 40

Protection: UV Resistant

Directly from One of the Biggest Pex Systems Manufacturers

This Efield Product Compatible Pex Tubing

Made of Lead Free Brass

✔ Cap for closing the end of a pipe or fitting. Conveniently packaged in quantities of 10.

✔ Slip opening for connecting to a male unthreaded pipe or fitting.

✔ Schedule 40 pressure fitting, pressure durable, easy to install and maintain, high tensile for home or industrial use, low lifetime cost.

Plastic construction for durability

Fits pipes with up to a 1-1/2 in. diameter

For mobile homes

ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN.

Contain RAINPAL RBI125F HDPE Rain Barrel Inlet Port and RAINPAL RBS022LF Brass Rain Barrel Ball Valve Spigot w/ Bulkhead Fitting

HDPE Fitting: For 2" Bung Cap with Fine Threads (Threaded Part Measure about 2.25 inches in Diameter, Distance between Adjacent Threads is approx 3/32 inch), 1.25" Barbed Side Accepts Any Pipe with 1.25“ Inside Diameter

End cap for closing the end of a pipe or tube

Clamp end connection for a non-permanent seal, providing access to lines

Stainless Steel 304 for resistance to corrosion and high temperatures

【City Water Inlet for RV】: The RV water inlet connection check valve is with 3/4’’ NH(GHT) female into 1/2’’ NPT male thread, an extra flexible rubber dust plug for replacement.

【Material】: The RV city water inlet valve is lead free brass, keeping your water safe to drink. The white flange is made of metal. Durable metal construction allows the check valve backflow preventer to withstand high pressure, temperature, resistant to corrosion and frequent daily use.

【Metal Fresh Water Fill Inlet Flange】: Easy to install this RV water check valve inside your RV's fresh water system to prevent backflow and keep nasty contaminants out of your RV's fresh water plumbing, the rubber cap protects connection point from dust when not in use.

PULL SERVICE DROP CONDUCTORS: This aluminum service entrance cap from Morris Products feature a clamp-on type head that is used with rigid conduit, IMC or E.M.T. to pull service drop conductors with ease.

HEAVY-DUTY ASSEMBLY: Know that you’re getting high quality when opting for this aluminum service entrance cap that is assembled with electrical grade phenolic insulators with multiple holes.

DURABLE CONSTRUCTION: Each aluminum service entrance cap is crafted from cast aluminum and includes a heavy-duty pressure bar type clamp in body, suitable for outdoor use.

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

Size - Cap Fits Standard 3/4” Threaded Pipes and Fittings. NOTE: These items are PAINTED BLACK.

Material & Products - GeilSpace Pipes and Fittings are designed with a standard industrial finish; materials and threads constructed from sturdy cast iron; Unlike most other products on Amazon with grey looking and oily surface, our products’ surface is black and clean after high temperature paint, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact.

How to Use - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes; choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination.

Type: Compression Cap

Tube Size:3/8" OD

Materies: BRASS

Each Pack Contains One Small Cap 5/16-24 And One Large Cap 3/8-24

Brass Construction

Fits Most Drainable Valves

SAVE MONEY: Supply Giants Combo Pack Includes 66 Pipes with Various Lengths, to Make Your DIY Projects Hassle-Free and Economical (Includes 6 of each size 1-6 Inches)

DECORATIVE STYLE: Create The Perfect Industrial Shelves, Furniture and Accessories With Our Cast Iron Pipes To Add Rustic Look To Any Room

SIMPLE INSTALLATION: Assembling These Industrial Pipes With Your Pipe Fittings Doesn’t Require Any Skills Its Easy And Fun. Bring The Vintage Beauty To Your Home