Best 90 Degree Elbow Fittings in 2026

1/2 INCH CLOSE NIPPLE - Our 1/2" black steel pipe nipple is a short length of cast iron pipe fittings with male pipe threads at both ends for connecting pipes and fittings. You can connect this NPT (national pipe thread) 1/2" inch nipple metal piping to 1/2" inch floor flanges, 90 degree elbows, tees, couplings, caps, etc.

RAW IRON: We use 100% top-quality raw material that assures high performance of our pipe decor industrial pipe fittings. Brooklyn Pipe has a wide range of available rang of decorative DIY pipe fittings that can help you with all your projects.

NO CHINA STAMP: Our Close Pipe Nipple doesn't have the word "CHINA" stamped into the close nipple which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market.

METERIAL - This PIPE FLANGE is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability.

SIZE - Our 3 hole black flange is 2-1/2 inches in diameter, the flange can satisfy any home decoration, including various styles.

DESIGN - The vast majority of the market is a four-hole flange, but the three-hole flange will be more perfect support effect which spreads out the payload evenly. You could get creative and add style to any home, office or interior space with LDR pipe decor fittings and connectors. From standard to unique and innovative fittings, the types of furnishings you can create are limitless

Easily drains the RV fresh water tank

Graduated for use with 3/4" or 1/2" vinyl tubing

Built using durable plastic

Sanitary Spool Tube fits Tri-clamp: 2", Ferrule OD: 64MM

Sanitary Spool Tube Length: 6 Inch ( 152mm ), Sanitary Spool Tube OD: 2 Inch

Round metal tubing for transport of fluids and gases in chloride environments

SHARKBITE FROST FREE SILLCOCK: Outside faucet valve features an integrated 1/2 inch push-fit inlet and 3/4 inch garden hose outlet; a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing

VERSATILE: Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; ideal for working in tight spaces

EASY TO INSTALL: This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

Standard Thread has full length thread for thick hulls and easy tightening

Hose Size: 3/4" I.D.

Flange Dia.: 1-7/8"

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but still retain the same vintage aesthetic. Accentuate your space no matter what your style is.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choice with Pipe Décor fittings. Make custom industrial shelves to mount to your wall, towel bars, lamps, coat hooks, tables, desks, and much more. Whatever you can imagine you can create. Showcase your own unique sense of style and design.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 M12FLG10PK.

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

3/4 INCH BLACK PIPE FLOOR FLANGE 10 PACK: Design ambitious projects for your bedroom, bathroom, kitchen, den, dining room and without worrying about running out of pieces. Stock up so you have the flanges on hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. 4 screw holes secure your flange to floors and walls of nearly any material. Create shelves, hooks, clothing racks, towel bars, table legs, curtain rods and custom furniture.

UNLEASH YOUR CREATIVITY and bring the vintage industrial style into your home, office, garage, workshop or any interior space with Pipe Décor. Choose from our large selection of fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, antique bar decorations, farmhouse and retro themed furniture. Your family, friends and guests will love your custom look.

HIGH QUALITY, DURABLE INDUSTRIAL PIPE FITTINGS. You will know Pipe Décor parts and accessories when you hold them. Beauty and beast. Strength and style. This is real industrial pipe for your decoration and designs or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 365 34FLG10PK.

1 x Adjustable Tri Clamp, 2 x Weld on Ferrules, 1 x FKM Gasket.304 Stainless Steel Material

Clamp Size: 1.5" Tri Clamp, 51mm Flange OD; Ferrule Size: 38mm Pipe OD, 35mm Pipe ID

Gasket Size: 51mm OD, 35mm ID

End cap for closing the end of a pipe or tube

Clamp end connection for a non-permanent seal, providing access to lines

Stainless Steel 304 for resistance to corrosion and high temperatures

Garboard drain plug kit is a traditional threaded boat plug with screws, AISI 316 stainless steel.

Boat transom drain plug kit, fits 1 inch Hole, flange diameter is 2 inch, boat plug diameter is 1/2 inch NPT.

Boat garboard drain with stainless steel plug allows bilge to drain when a vessel is hauled out of the water.

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years.

Wide Application: Our pipe fittings come in 20 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality.

Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws.

【City Water Inlet for RV】: The RV water inlet connection check valve is with 3/4’’ NH(GHT) female into 1/2’’ NPT male thread, an extra flexible rubber dust plug for replacement.

【Material】: The RV city water inlet valve is lead free brass, keeping your water safe to drink. The white flange is made of metal. Durable metal construction allows the check valve backflow preventer to withstand high pressure, temperature, resistant to corrosion and frequent daily use.

【Metal Fresh Water Fill Inlet Flange】: Easy to install this RV water check valve inside your RV's fresh water system to prevent backflow and keep nasty contaminants out of your RV's fresh water plumbing, the rubber cap protects connection point from dust when not in use.

Comes with all the hardware you need to help connect a tailpiece to your disposal or make a repair on your existing disposer.

Compatible with and is a replacement part for InSinkErator parts #1491, #1470, #5490 and is designed for use with tailpiece elbow #88003.

Repair kit for garbage disposals model #333, #17 and #77.

Size - Floor Flange Fits Standard 1/2” Threaded Pipes and Fittings. NOTE: The GeilSpace Grey Pipe & Fitting series are coated with a rust preventive oil during manufacturing process, you need to clean them and do some anti-rust measures.

Material & Products - GeilSpace Grey Pipes and Fittings are designed with a standard industrial; materials and threads constructed from sturdy metal; our products’ surface is coated with a rust preventive oil during manufacturing process, and you can seal it after cleaning.

More Choices - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find BLACK PAINTED pipes and fittings in our store.

BRASS P-TRAP: Designed to prevent sewer gas from escaping from a plumbing fixture or drain

HIGH QUALITY MATERIAL: 20-gauge heavy duty brass construction for long-term durability

STANDARD INSTALLATION: Features a 1-1/4-in. inlet and 1-1/4-in. outlet for bathroom sinks

Hose Thru Fitting Drain Tube for For boat,marine,caravan,truck,automotive applications,motorwell, livewell, or baitwell.Ideal for use as an exhaust port for a bilge pump.

Maximum corrosion resistance and durability in the saltwater environment.Polished to a beautiful, mirror-like finish.

Flange O.D:1-3/8";Size:3/8"

Water valve kit

Fits Style Lite toilets

Fits Style Plus toilets

Dual inlet thread for connecting pipe and locknut

High tensile serrated arms

Machined flange for support against tank wall

Intended for Home Theater Installations in new or retrofit work

Accepts standard-style plates with receptacles and decorator style devices with plates

Supplied with cover blanks, wall plate, cable entry device and cable connectors for unused openings

1/2" FPT x 3/4" hose fitting

Surface mount aluminum flange

Lead free brass check valve

Easily install without tools - EasyDrain's Flexible P-Trap Pipe is designed to be durable and easy to install, with absolutely no need for tools or expert installation! Simply hand-tighten the included flanges to ensure that you get a proper seal.

Adjustable - Easily adjust your pipe between 13 inches up to 28 1/3 inches to fit any sink environment. The corrugated hose fits 1-1/2 inch sink istallations with a compatible connector that comes in two sizes. 1 ¼ and 7/8 sink drains.

Can be easily removed - Perfectly suited for connecting to your kitchen sink drain, garbage disposal, bathroom sinks, bathtubs and more. Should you run into a clog or need a deep clean, simply remove the p-trap and relief any clogged areas by simply straightening the hose and run water through it into a bucket.

STUB-OUT COVER: Provides an easy and attractive solution for covering rough stub-out water supply pipes

PLUMBING SUPPORT: Wall-mounted cover tube straightens and supports curved PEX pipe

SLEEK DESIGN: Extends 2-3/4-in. from the wall, featuring a polished chrome finish to match existing bathroom hardware

RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet.

Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter.

RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV.

4 Pin Connector Specifications: The working voltage of the power connector can reach 400VAC, and the rated current is 10A. General wire diameter: Φ3.0mm～Φ9.0mm. Cable specification: 1.0 --1.5mm²/18-16 AWG. Contact resistance <2.5mΩ. Mounting dimensions: M16. Waterproof Protection level: IP67. Package list: 1 male plug + 1 female socket.

High-Quality Material: Our 4 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Use metal material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise.

Easy to Install Electrical Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds.

BATH AND KITCHEN P-TRAP: P-trap is designed for use in tubular drain applications, and is equipped with cleanout for pipe drainage; P-trap plays the important role of collecting debris from the sink drain, which would otherwise clog the entire plumbing system if it would pass through

UNIVERSAL: P-traps are up to code and widely used in under sink installation for kitchens and bathrooms

DURABLE: Bathroom P-Trap is constructed of 17-gauge chrome-plated brass for longer-lasting use, and has a high resistance to heat

Made of polypropylene and glass fiber for strength

Stainless-steel flange offers excellent corrosion resistance

Designed for easier applications where hose is difficult to route

Includes 2 x 2" Weld-on Fittings, 1 x 2" Clamp, 1 x 2" PTFE Gasket

Fit for all other home brewing stuff sanitary fittings

This Tri Clover Clamp is more easy to install than the flange connection pipe.Easy tighten thumb screw.

316 stainless steel garboard drain plug

Boat garboard drain plug kit

Boat drain plug fits salt water & UV resistant