Best Sports Floor Jacks in 2026

15 US TON Lift Capacity from the Toe, 30 Ton Lift Capacity at from the Top of the jack.

Lowest Minimum Jacking Clearance 1.125 Inches.

Machined Cylinder Housing improves the quality of the jack - Compare to traditional stamped sheet metal cylinder housing.

SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack

BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly; Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage

USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs)

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Compression Load Range* 18,000 to 11,350 lbs.

Premium quality heavy duty high carbon steel

Finished with corrosion-resistant powder (exceeds ASTM-B117-85)

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

【High Quality】Made from highly durable rubber which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.

【Function】A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.

【Pad Dimensions】71mm / 2.8 inches in diameter, 33mm / 1.3 inches height, Slot Dimensions: 13mm / 0.5 inches Wide 13mm / 0.5 inches deep.

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires

24" max height is versatile and lifts high enough for pick-ups and suv's

Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps

Long Handle - No more bending all the way to the floor! The 16.5” shoe horns allow you to put on shoes with ease while sitting or standing. Practical long handled shoe horn for seniors, women, men, kids, and for putting on all types of footwear.

Sturdy Construction - Made of solid 1.7mm thick stainless steel, the long metal shoe horn will never bend or break in normal use. With well-finished surface and rounded edges, the shoe spoon makes it smooth and easy to slide your foot into shoes.

Easy Grip Handle - With a soft rubber-coating on the upper handle, you can get a comfortable and stable grip when using the long shoehorn to put on shoes. The curved half hook on the top also makes it convenient to hang from things for easy reach.

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

【ALLEVIATES JACK SINKAGE ON SOFT SURFACES】---The Hi-Lift jack off-road base is designed to alleviate jack sinkage on soft surfaces,like sand, mud, grass. Provide the off-road base with better footing and greater stability during the lifting process

【COMPATIBLE WITH MOST HI-LIFT JACKS】---Designed and used for most of Hi-Lift jacks, Includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not fit for POST POPPER Jack

【HIGH QUALITY HI-LIFT JACK OFF-ROAD BASE】---Made of a tough PP synthetic material,rugged construction for strength and durability.Better more than a chunk of wood will not rot or break.Molded in high visibility orange, making it harder to leave behind when the task is completed

Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches.

A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety.

This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another.

WEIGHT CAPACITY: 4,500 lbs

STEEL LIFTING SADDLE with 360 degree swivel.

INCLUDED CASE: Clean and easy storage with blow molded plastic case

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

6.75 Inch Floor Jack Saddle Fits Most Models

6.75 Inch Diameter, 1-3/16 inch Diameter Stem

Can Be Used on Floor Jacks Up To 5 Tons

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

Adjustable, easy-to-assemble, easy-to-install floor jacks are designed for temporary support during remodeling projects to reinforce stairs, porches, decks, or weak floors

This product is manufactured in united states

This product meets customer requirement

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13"

The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

The floor jack has a large saddle surface area for better contact with the load being supported

[2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs.

[LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs.

[BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity.

Labor-Saving Jack: Pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.3"/135 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lift.

Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place.

Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air; when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process.

⚠Note: Never use it on a sloped ground, be sure to use it on a flat road and place in the direction parallel to the car. 🧰It takes about one minute for the floor jack to reach a max. height (17.7in) with max load capacity of 5T. When the car is lifted, use the impact wrench to remove the screws and change tire, the built-in tire pump will inflate the tire quickly and get your work done. This electric hydraulic floor jack is designed perfectly to deal with a flat tire without striking a blow.

🧰Best Choice for Sedan & SUV: The jack head fit for both Sedan and SUV, cars under 5 ton can be easily lifted. It can be connected to either a 12V car cigarette lighter or car battery, it is a necessary repair tool when run into roadside emergencies. 👉Pay attention to the positive and negative poles of the cable connectors on both ends, if reversely connected, there will be screw rod bending, abnormal sound and button failure.

🧰Safety Guarantee: When the air jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack will increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack is ready to protect your car from overload.

Jack it Up: With 2.5 tons/5500 lbs strong loading capacity, VEVOR's floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3.35"/85 mm. Max. Height: 14.96"/380 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a single piston hydraulic pump allows you to pump the jack to the desired height easily.

Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the handle on the top is convenient for you to lift the jack.

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

Labor-Saving Jack: Pneumatic jack capacity: 4400 lbs/2T. Minimum height: 4.3"/110 mm. Maximum height: 11.8"/300 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lift.

Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place.

Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air; when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process.

【5T Cars Changing Tire】This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-17.7 inch(155mm-450mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing.

【2 in 1 Kit】This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market.

【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power.It is only 8.35kgs for the whole set. The velcro on the bottom of the box prevents it from sliding in the trunk of the car.This small hydraulic jack is easily to be storage in the car trunk when not in use.

Product 1: Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Product 1: Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically

Product 1: Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

21 inches High Lift suitable for SUVs and off road vehicles

Capacity: 3 Tonne

Lifting range 190-530mm (7.5-21inches)

【MAX WEIGHT/HEIGHT: 6600lbs/15.75’’】- The pneumatic jack capacity: 6600 lbs/3T. And it's lifting Height Range: 5.9''-15.75''. It just takes 5 seconds to lift. Working Temp: -60℃~ 50℃.

【HEAVY DUTY CONSTRUCTION】- The pneumatic jack is made of high strength steel that makes the whole body sturdy and durable. The solid construction also provides lateral and vertical stability.

【PORTABLE HANDLE】- There is a folding handle equipped in this airbag jack, which can be adjusted to three different positions to make the jack easy to use.