Best Honda Fuel Lines in 2026

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)

Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Package includes the following 4 different size fuel line hose,Please undetand that there maybe 1-3 cm dimensional deviation due to manual measurement.

The Size of small engine fuel lines: I.D. x O.D: .080" x .14", overall length: 4 feet; I.D. x O.D: 3/32" x 3/16", overall length: 4 feet; I.D. x O.D: 1/8" x 3/16", overall length: 4 feet;I.D. x O.D: 1/8" x 1/4", overall length: 4 feet.

Fuel lines will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

【Application】: Used as transmission cooler lines, turbo cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, oil feed line.

【Size】: ID-0.34"/8.64mm; OD-0.55"/3.97 mm

【Feature】: Working Pressure: -40 F to +350 F&Working Pressure: 500 PSI/Burst pressure: 2000 PSI

Direct replacement - these fuel line connectors fit and function like the vehicle's original equipment connectors for reliable, leak-free performance

Quality construction - manufactured from premium materials for a long service life

Saves money - replace only the part, not the entire assembly

【Features】6AN fuel line kit: Black braided nylon fuel hose has a full black nylon fiber braided jacket and chlorinated polyethylene (CPE) synthetic rubber inner line.

【Application】6AN nylon braided hose kit can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel. Please note that the service life may be shortened when using fuel. Not suitable for E85. This kind of braided 6an hose can be used for brake system, fuel pump, fuel filter, oil return, oil return system, turbo cooler system, transmission system, oil cooler kit, etc.

【Safety Features】The 6AN CPE hose working temperature range: -100℉ to 500℉ (-73℃ to 260℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi.

Upgraded replacement - the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance

Pre-formed fit - these lines are already shaped to fit specific applications for easier installation

Complete kit - includes brackets and fittings for thorough repair

Upgraded replacement - the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance

Pre-formed fit - these lines are already shaped to fit specific applications for easier installation

Complete kit - includes brackets and fittings for thorough repair

[Fitment] The SOFO Universal Fuel Line Hose is designed to emit fuel vapor and control vacuum smog, making it a versatile solution for a range of engines, including Briggs & Stratton, Kawasaki, Kohler, John Deere, Craftsman, Simpson, Husqvarna, Oregon, Stens, Gravely, and Kubota. It is suitable for use in a variety of fuel-powered equipment, including Go-Karts, ATVs, Mini Bikes, Jeeps, Motorcycles, Lawn Mowers, Snowmobiles, and more.

[Package Contents] Each package includes a 10ft 1/4-inch (with a supporter) ID Fuel Hose, 2 Fuel filters, and 5 ID Hose Clamps. The fuel hose has a 1/4-inch (6.4 mm) inner diameter and 10 mm outer diameter, providing a reliable and secure connection.

[High-Quality Materials] The fuel hose is made of 100% brand new, wear-resistant rubber with a 6.4 mm inner diameter, ensuring durability and longevity. The hose clamps are constructed of spring steel, providing a reliable and reusable solution.

【5 Sizes Set】you will receive 5 different specifications lengths 3.3ft NBR fuel line hose (inner diameter are 3/8in,1/2in,5/16in,1/4in,3/16in) and 20 hose clamps. The 5 different inner diameters of our products can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.

【Thicker Fuel Hose】Our oil hose is made of NBR rubber with a braided layer of polyester thread in the middle. The wall of our fuel hose is thick enough to have the advantages of not easy to wear, not easy to aging, high temperature resistance, low temperature resistance, good acid and alkali resistance. The bending performance of the fuel hose is very good. Working Pressure: 300 psi. Burst Pressure: 1160 psi. Temperature range: -20°F to 221°F(-30°C to 105°C).

【Oil Tube Size】Our 5 different sizes of flexible NBR rubber tubes are: ID: 3/16in OD: 0.43in (11mm); ID: 1/4in OD: 0.47in (12mm); ID: 5/16in OD: 0.55in (14mm) ; ID: 3/8in OD: 0.64in (16.5mm); ID: 1/2in OD: 0.74in (19mm). This cost-effective product set can meet your different needs at once.

Upgraded replacement - the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance

Pre-formed fit - these lines are already shaped to fit specific applications for easier installation

Complete kit - includes brackets and fittings for thorough repair

Upgraded replacement - the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance

Pre-formed fit - these lines are already shaped to fit specific applications for easier installation

Complete kit - includes brackets and fittings for thorough repair

Inner diameter: 4.8mm; Outer diameter: 8.8mm; Adapt to temperature: -22F - 338F

Fuel pipeline is oil-resistant, cold-resistant and ethanol-resistant; Customized super-long 10 feet (3 meters) can be cut according to all your applications.

It is suitable for conveying gasoline, E-85, diesel and biodiesel fuels in lawn mowers, cultivators, tractors, snow blowers, motorcycles, mini-bicycles, cross-country bicycles, generators, garbage pumps, pit bicycles, all-terrain vehicles, UTV, go-karts, Tao Tao, four-wheeled vehicles, snowmobiles, power pressure washers, marine outboard machines and motors, and almost all of them.

✔ DIY Size: 1 x fuel line is 10 ft/3 m, ID: 3/8 in (10 mm), OD: 2/3 in (17 mm) Can be cut to fit all your applications.

✔ Superior Quality: This engine fuel line is made of oil resistant high quality braided NBR. The 3/8 transfer hose has good retardation and excellent corrosion resistance. It is resistant to wear and high temperature, perfect for fuel injection auto accessories.

✔ High PSI Rating: 3/8 hose is rated for 300 PSI working pressure up to 1200 PSI. 3/8 fuel line hose thrives in the -40°F to 257°F temperature range. Minimum bend radius: 3.9 inches (100 mm).

Ready to install - these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for standard cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors

Full length - these lines are made to the correct length for the specified vehicle, but flexible so they're easier to route than rigid lines, saving replacement time

Upgraded materials - high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions

Ready to install - these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for specified Cadillac, Chevrolet and GMC models, with all brackets and connectors

Full length - these lines are made to the correct length for the specified vehicle, but flexible so they're easier to route than rigid lines, saving replacement time

Upgraded materials - high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions

Ready to install - these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for extended cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors

Full length - these lines are made to the correct length for the specified vehicle, but flexible so they're easier to route than rigid lines, saving replacement time

Upgraded materials - high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions

【Vehicle Fitment】Compatible with Chevrolet Silverado 1500/Silverado 2500 1999-2003, Silverado 1500 HD/Silverado 2500 HD/Silverado 3500 2001-2003; Compatible with GMC Sierra 1500/Sierra 2500 1999-2003, Sierra 1500 HD/Sierra 2500 HD/Sierra 3500 2001-2003

【Reference Number】FL-FG0053, FLFG0053

【Directly Fit】OE Replacement Fuel line Kit, Easy installation; Materials for a long lifespan.

Fuel line:1/4 inch inner diameter (6.4mm), 7/16-inch outer-diameter(11.1mm); Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 1/3-inches

This fuel line is designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in a wide range of small engines, including lawn mowers, generators, motorcycles, ATVs, marine boat outboards, and more.

The fuel filter prevents impurities, dirt, and particles from entering the carburetor, ensuring that only clean fuel flows through and maintains engine power.