Best Meanlin Measure Gauges in 2026

Quickly and easily size bolts, screws, nuts and twist drills

Features ruler marked with inches and millimeters

Gauge metric hex nuts and washers by holding under metric holes

For pressure measuring of gas, liquid which is not corrosive to brass, also where vibration and pulsation is a concern

2-1/2" dial size, 1/4"NPT center back mount

Pressure range: 0-100psi/kpa dual scale

Each leaf is marked with thread pitch

With locking clamp

Inch and metric sizes

12 inch heavy duty flexible air hose with brass fittings

Zinc cast alloy body with heavy duty brass internal parts for long life

Heavy duty tire inflator for industrial, home, or shop use

DRY PRESSURE GAUGE: Make sure your machine is functioning at peak performance! This pressure gauge is made of brass wetted parts for measuring non-corrosive liquid & gas pressure. Great for HVAC, pneumatic, hydraulic systems, air compressors & more.

DUAL SCALE GAUGE: This pressure gauge features a dual-scale gauge 0-15 psi/kPa and can be installed anywhere in the circuit to easily measure pressure at any point. With an acrylic lens for maximum clarity, providing accurate, clear readings at all times

STURDY & IP52 CERTIFIED: This circular dial is enclosed in a steel case for environmental protection and is IP52 certified for protection against dust or liquids. This pressure gauge is built to last, so you can count on it when the pressure mounts.

Accurate measures tire tread depth gauge tool

Calibrated from 0 to 1 inch in 1/ 32 inch

Red range on bar: 0-3/32; Yellow Range on bar: 3/32 - 6/32; 5. Green Range on bar: 6/32-32/32

【Easy to read】Improved large font and clear scale for easier reading. Clear color, standard inch increments, better than other rain gauge glass tubes on the market.

【High Quality Material】Our rain Gauge Replacement Tube are made of durable glass. Beautiful and textured.

【Dimensions】2.16 inch(Diameter) x 8.26 inch(Height), Capacity: 7 inch.

WANT PROPERLY INFLATED TIRES? The air chuck with gauge ready to connects to your ¼ NPT air compressor outputs to quickly measure, inflate or air down overinflated tires with precision up to 1 PSI

The air pressure tire inflator has a SWIVEL AIR CHUCK and LONGER HOSE that gives you a great seal on the tire valve whilst freeing up your hands to operate the pump

ACCURATE TIRE PRESSURE GAUGE always returns a stable reading within 2% of the exact pressure of your tire. So, you get precise inflation every time you use it. Unlike other digital tire gauges, our analog inflator gauge works without relying on batteries!

Metal Thickness Gauge Function——The Thickness Gauge can helps you check metal sheet thickness or wire diameter before welding or working. By use this metal thickness template, you can get the thickness of your metal sheet, and that will help you weld better and avoid unnecessary errors.

Updated Thickness Gauge of 229895—— This is a gauge which is updated by miller 229895 thickness gauge. It has more clear scales and easy to read the data. And on the other side is a ruler design (Range: 0-2 inch, Increment: 1/16'').

Premium Quality Material of Stainless Steel：This sheet metal thickness gauge is made of Stainless Steel , which will not rust in dry environment and easy to keep.

Sensitive diaphragm gauge calibrated in inches of water column and ounces per square inch

Improved lamination strength of diaphragm (bellows) to brass plate withstands higher over-pressure

Tube nipple for easy connection to system manifold

ACCESS: Angled ends for access

BLADE LENGTH: 4"

CONVENIENT: Includes both Inch and Metric measurements

【Durable for Use】Anti-rust 65 Manganese Steel, the stainless steel feeler gauge Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.

【Wide Application】The feeler gauge is used to measure the gap size, Suitable for designers, engineers, mechanics to measure the thickness of Valves,tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places.

【Metric Sizes (mm)】0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.

6-Inch Capacity

Magnetic Base

Accutrate to 0.0005-Inch

V-WAC Single Weld Gage

Use to: Checks undercut, crown height, porosity, pits

only Inch

Measures all metric threads from .5mm to 6mm

48 wires in 16 different sizes. ~ Measures all 60° threads

3 to 48 threads per inch

29 Holes measurement: 29-hole sizes remain constant, providing precision accuracy; The drill sizes in both inches and decimal equivalents, equivalents range from 1/16 inch to 1/2 inch by 1/64 inch, come with clearly marked fractions and decimal for accurate measurement

Exquisite design: heavy gauge steel construction is machined and ground to close tolerances, it can quickly and conveniently identify drill bit diameter; With a hanging hole design for easy hanging, which provides convenience for your work

Durable material: well constructed of stainless steel, it is sturdy and durable, helps to gauge the drill bits quickly and easily when working with older, unmarked drill bits and bits that are too small to fit diameter markings, practical equipment in home tools box

Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness; Foldable, easy and convenient to take and store

Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification

Metric sizes (mm): the 32 blades feeler gauge owns 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88; The 16 blade feeler gauge owns 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508

Range: 0 to 22" (with included 6 extension rods 1", 2", 3", 4", 5", 6") Resolution: 0.0005"

Super high precision electronic indicator 0-1" Travel, Resolution: .0005" / .01mm / 1/128 inch

Indicator Gauge conforms to AGD standard and Federal Accuracy specifications

WIDE APERTURE: The Trend Digital Depth Gauge features a 2 23/64 inch wide aperture to span fence cheeks and bigger router base openings for a variety of woodworking projects.

ACCURATE DIGITAL READOUT: This depth gauge is accurate to 0.003 inch with readout registering in 0.002 inch increments, allowing for precision setting of rebates and grooves on router tables.

MAGNETIC FEET: The magnetic feet hold it to metal surfaces, freeing your hands for adjustments and setting up. The locking option can secure any measurements that needs to be transferred.

HI-LO WELDING GAGE MEASURES INTERNAL ALIGNMENT Of pipe after fit-up alignment, cuts radiographic rejects. Measures internal misalignment of pipe before and after tacking. Measurements read in standard one side, and metric on the opposite side.

Changes from standard to metric simply remove gauge body, turn scales over and replace body; Measure internal misalignment;

Measure fit- up gap Measure bevel on end preparation; Measure the crown height of welds; Measure fillet weld size; Measure scribed line, socket welds; Can be calibrated to NBS standard.

Both Metric and Stadard reading | Welding taper gauge: 1-15mm (1/64-5/8 inch)

Accurate figures and increments are etched into surface, easy to read

Polished, bright and clean without burr, rust laser engraved line and will not rub off

★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store.

★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust.

★【Measuring Range】: 51pcs America SAE type measuring range is 4-84; 58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28.

SPECIFICATIONS: This set includes two types of feeler gauges. The straight gauge has 32 straight blades, and the offset gauge has 16 blades with an offset design that’s great for awkward areas. Each blade is marked with both metric and SAE sizing, and each set folds neatly into itself for easy transportation and storage. These gauges let you measure tappet clearances, spark plug gaps, bearing clearances, piston ring gaps and more.

STRAIGHT GAUGE SIZE: Inch - 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035 (Metric - 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88mm)

OFFSET GAUGE SIZE: Inch - 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020-Inch (Metric - 0.127, 0.152, 0.178, 0203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508mm)

Aluminum Alloy Digital Thickness Gage Gauge-- Large LCD Display, is Used to Accurately Measuring Soft Materials Such as a Variety of Paper, Film, Leather, Sponges and Wires

0 ~ 12.7 mm Measuring Range-- Measuring Range from 0 ~ 12.7 mm (0 ~ 0.5 inch), High Resolution up to 0.01 mm (0.0005") with a Tolerance of Less than 0.001"(0.02mm)

Humanization Design-- Grip Handle, Thumb Trigger, Easy to Operate and Hold

EXTRA TALL HEIGHT STICK FOR BIG LOADS - Ideal way to measure tall loads or verify road hazard heights. The QuickClick Extended Plus height stick accurately measures loads and hazards up to 20' high. The rod includes both English and Metric markings for use all across North America. The strong, non-conductive heavy-duty fiberglass body is impregnated with high visibility green coloring for easy identification and safe usage.

PATENTED QUICK CLICK HINGE - The patented spring loaded hinge takes the guesswork out of load height measurement. A simple pull and flip of the wrist locks the QuickClick Height Stick into the proper measuring position every time. The spring loaded hinge eliminates the need for wing nuts or lock pins. The no-rust aluminum forged hinge and stainless steel spring hold up against the elements for long field life.

EASY, ACCURATE LOAD HEIGHT AND CLEARANCE MEASUREMENT - No more need to guess at the proper measuring angle because the cross arm locks at 90 degrees, for accurate measurement. The ruler accurately measures loads from 6 feet to 20 feet. Large, accurate easy-to-read numbers with both US and metric measurements insure that you know the exact height of your load.

Made of quality stainless steel and processed with chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability

The America SAE type thread pitch gauge has 51 pieces tablets.The metric and Inch and SAE type thread pitch gauge has 58 pieces tablets, 24 tablets of which are metric, 28 tablets are Inch and 6 tablets are America SAE

Well Made: The toothed edges are sharply defined and the numbers are stamped and easy to read

FUNCTIONS: TEST CYLINDER COMPRESSION --- This cylinder compression tester kit is used for testing pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.

APPLICATIONS: GASOLINE ENGINE CYLINDER --- Come with different sizes rotary and push on adapters, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. NOT FOR DIESEL ENGINE.

UNIVERSAL: INCLUDE 10 CONNECT ADAPTERS --- 13-in-1 engine tester gauge kit includes 1-piece spring buckle gauge; 5-pieces brass adapters M10, M12, M14, M16, M18 for wide applications; 2-pieces straight and angled push-on connectors for direct testing; 1-piece extra long 8 inches extension straight rod, 1-piece 12 inches M12 extension hose rod and 1-piece 16 inches extension hose for long reach testing. Come with extra 2-piece spark plug testers.

[Cut Wood Threads]: Use the Deadwood Crafted Tools Plastic Dowel Jigs Woodworking Thread Tap Die Kit to cut 1/2-inch external and internal threads for fasteners and holes; 8 thread per inch

[Premium Cutting]: Tapping tool set die and thread cutter screw hole ensures smooth, clean cuts for hard wood blocks and soft wood dowels for woodworking projects; 7/16-inch tap hole for 1/2-inch (1.2cm) dowel

[How to Use]: Use oil lubricant (not included) to soften wood and 7/16-inch drill bit; Align dowel to wood threading kit threader hole, press down and turn to create external threads; Included threaded insert drill tap set tool cuts threaded holes in wood blocks to connect threaded large dowels

Measures: stainless steel tool set measuring from 0.0015 Inch to 0.035 Inch (0.04mm to 0.88 mm), a feeler gauge set portable to use with clear numbers on it

Practical: Made of stainless steel, each measuring feeler gauge has 32 blades of thickness, a trigger pull gauge, easy and convenient to take and stock

Multi-role: Marked Metric /Imperial reading, for measuring gap width/thickness imperial /metric sizes, practical tools in the designers, engineers, machinist tool box

Product 1: ANGLE FINDER: This adjustable precision tool is designed to capture and precisely cut difficult-to-measure gable angles in fiber cement siding and paneling from 0 – 90° degrees for fast and easy use, with lightweight aluminum construction.

Product 1: CORNER MEASURING TOOL: This scribe measures the angle between the horizontal of the ceiling wall line and the diagonal angle of the roof joists, which helps to achieve a professionally finished single cut that eliminates unnecessary unsightly gaps.

Product 1: SAW GUIDE: Our two-in-one angle gauge is designed to accommodate various cutting tools but has a specifically constructed guide slot for use with PacTools handheld shears for a straight and exact cut that matches the contour of the gable.