Best Littlemachineshopcom Lathe Accessories in 2026

The PSI Super Center Crown compatible with headstocks with #2MT spindles

Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive

Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied

Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter

Easily open and close the three chuck jaws using the included key

Compatible with any MT2 drill press, lathe, or mill

1-inch x 8 TPI to M14-1.5 mounting adapter makes for easy installation and center changes

Three multi-spur drive centers measure in at 5/8-inch, 1-inch and 1-1/2 inch in size

Includes two MT2 live centers: one with crown tip and one without

Large live lathe center

60-degree point

Huge live center for heavy duty workpieces

Made of Steel,Heavy and Rigid

2" Diameter,1"-8TPI Thread Size

4 mounting holes on the plate, easy installation of the workpiece

This center finder is perfect for laying out bowls, trays and platters

Finding the center of irregular shapes to optimize yield is simple and easy

Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments

This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock

System includes: (1) #2MT 16" heavy duty mandrel, (3) 8" fabric buffing wheels (Linen, Linen/Flannel Combo, Flannel), (3) buffing compound bars (Tripoli, White Diamond, Carnuba Wax), hardware packet, and instructions

Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center

SANDPAPER ASSORTMENT: Use the DCT | 150-600 Grit Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of abrasive sanding paper are needed; Back of each roll is cloth-backed and marked with grit number approximately every 9 inches (22.9cm)

FINISH YOUR PROJECT: Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings; For dry (not wet); Fabric-backed for longer life than paper-backed or sticky (adhesive) PSA sandpaper

SAVE TIME: Rolls are cut into convenient 1-inch (2.5cm) wide strips; Box includes 5 dispensing slots and 1 built-in sandpaper cutting blade on the bottom edge of the box to cut off a piece of the included sandpaper; Keeps everything neat and tidy so you have less waste

✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.

✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects

✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined

Capacity: 5/64'' to 1/2''

Mounting holes: Jacobs taper #33

Mandrel taper: MT2

Scroll chuck perfect for holding bowls, spindles, and other unwieldy lathe projects

Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size

External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches

Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining.

This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder

Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved.

Compatible with headstocks with #2MT spindles

Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive

Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied

This steady rest is compatible with 12" swing lathe. Easy installation, no additional hardware required.

The position of each wheel can be adjusted individually. Which gives it a wide range to easily adapt to any turning pieces from 1/2" to 5.5".

Can be used for turning long spindles like baseball bats, table and chair legs.

【EXCELLENT MATERIAL】Made of stainless steel, the bars of these knife holders will not scratch, wear-resistant, rust-proof, high hardness and long service life.

【UNIQUE DESIGN】Unique concave design for comfortable grip and stable handling, use these tool holders to easily reach into the inside of the bowl.

【EASY TO USE】The ultra-smooth round hardened steel top allows you to slide your lathe tools easily for superior results.

Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.

wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。

Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.

Compatible Model: Can be used for small lathe machine.

Easy Installation: No other tools needed. Easy to install.

Material: Made of steel material, durable and long service life.

3" Steel faceplate weighs 1.43 pounds, size 3 " with screw chuck

Have 4 mounting holes , with additional screw chuck,50mm thick steel faceplat

The steel faceplate is pre threaded to 1" x 8 tpi to match your spindle

【LONG SERVICE LIFE】- Lathe steady rest body is made of high hardness cast iron,firmly fixed in wood lathe,which can withstand long working hours and long service life.

【FIXED SOLID】 - Wood lathe tools and accessories of the three metal production fixed wheel,so that the wood parts firmly stable rotation;stable wheel using high-density iron,can withstand long working hours; surface for chrome plating treatment,anti-corrosion,rust-proof function.

【SMOOTH TO USE】 - Silky smooth movement,stability and precise wood lathe steady rest means you are free to focus on creating without worrying about vibration while turning.

Mini Lathe Woodworking Lathe Chuck 4 Grips

Suitable for Wood Turning Lover: the tungsten carbide cutter inserts are considerate combination sets for meeting the requirements of rough machining and finishing combination, compatible with wood turning tools and other related accessories, nicely matched, easy to replace wood jointers and planers, very suitable for experienced carpenters as well as beginners.

Material: the cutter inserts for wood lathe turning tools are made of quality tungsten steel material, solid and sturdy, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time.

Functions: the cutter inserts replacements are easy to clean, thoughtful design will relieve your fatigue to some extent, comfortable to use, ideal for hollowing out, trimming curve surface and decorating some details.

For shallow precision grooving and profile/copy turning

O-ring. snap-ring, relief grooving and high production

Opening of wide grooves by plunging and side turning

Shank Size (H x W): 3/8" x 3/8"

Black oxided smooth finish on each turning tool holder style and shank size.

Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.

Clearance angle of main cutting edge = 7degree; 1/4'' Square Shank; OAL.:2''; 5 Pcs Indexable Turning Tool Set, TCMT090204

STACR, STNCR, STECN, STDCR, STCCR, with 5 TCMT Inserts, 5 Trox Screws, 2 Torx Keys, Plastic Case

Versatile and economical. Screw Size: M2.2 x 6