Best Mayhew Tools Metalworking Chisels in 2026

Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch

Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch

Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch

6 PC Cold Chisel Kit

6 PC Cold Chisel Kit

6 PC Cold Chisel Kit

Slim, contoured handle for added control, precision and comfort

Design for use with a wooden mallet or the palm of the hand

High-carbon steel blade hardened to 58-HRC for improved edge retention

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 6 mm (1/4"), 12 mm (1/2"), 20 mm (13/16") and 26 mm (1 1/32")

17-Piece set

Includes Pin Punches, Solid Punches, Long Taper Punches, Prick Punches, Center Punches, Cold Chiesels, Cape Chisels, Diamond Point Chisels

Heavy duty construction for strength and durability

Used to cut and shape metals softer than the cutting edge of the chisel

Hard plastic, ergonomic handle allows the user to firmly grip the tool for precision, comfort and shock absorbance

Body Size: 5/8"; Hex Body Shape

🔨 Sharpened and thickened end made of heat treated chrome-vanadium steel CRV steel（better than high carbon steel ). With high hardness, high strength, high durability, and resists rust and corrosion.

🔨 The soft handguard with ergonomic design, it can help protect from oversrtike and anti-slip, shock-absorb. The comfortable grip and big plate hand protection against glancing blows or missed hits.

🔨 Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut.

16-piece woodworking punch and chisel set includes 3 cold chisels, 5 taper punches, 5 pin punches, 2 center punches, and 1 chisel punch gauge

Heat treated, chrome vanadium (Cr-V) alloy steel construction

Comfortable handles reduce hand strain and improve accuracy

Chrome vanadium steel blades, for increased strength and durability.

Chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium.

Cutting bolts, nuts and rivets

Content: 5 pieces

Diameter: 6/12/18/25/32 mm

Impact-resistant handle

PREMIUM SET: This pneumatic hammer chisel kit includes a set of 5 chisels made of high quality steel to provide the best in quality, strength, and durability

CHISELS INCLUDED: This 5-piece set includes the following chisels: tapered punch, flat chisel, panel cutter, sheet metal cutter, and spot weld breaker

USE WITH: Pair these chisels with your Ingersoll Rand 114GQC Edge Series Air Hammer

【Full 8 Sizes Wood Chisel Kit】Enertwist wood chisel set kit contains: 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4" and 1-1/2" chisels, full length of carpenter chisels are perfect for carving, shoveling, or sharpening in soft, hard, or manufactured wood products. Great for professional users for various of woodworking projects, like sharpening the wood edge line, shoveling the wood surface, repairing wood furniture and carving hobby models or wood crafts.

【Durable CR-V Steel Blade & Bevel Edge】Premium drop forged blade increases the tool's hardness and comes with better cutting effect. Blades with bevel edge for woodworking carving multi-purpose use, suitable for all softwood, hardwood and laminated wood. Each chisel has its own protection cap to cover the sharp blades when you finish working.

【Robust Strike Cap & Ergonomic Rubber Handle 】Ergonomically designed handle offers comfortable wood working. Hardened steel end cap with anti-impact curve surface for safely tolerates blows from hammers. Strong metal strike cap protects your hand from overstrike, against glancing blows or missed hits, ensure an easy and precise cut.

[PREMIUM]: This chisels in this set come with tempered tips that are hardened for extra sharpness making it a great addition to your tool collection cutting or shaving.

[QUALITY]: The heavy-duty cold chisel set is constructed from drop forged chrome vanadium steel for extra strength and durability that will ensure the longevity and long-lasting service life of this tool set at home or job.

[VERSATILE]: This set is great for craftsman and includes a variety of chisels and punches for a wide variety of work including marking, punching, scoring, and more.

🔨 💎 This package including 1 pcs flat chisel. Package including 2 pcs flat chisels (search B098QNR6CL). Sharpened and thickened flat end made of heat treated chrome-vanadium steel CRV steel（better than high carbon steel ). With high hardness, high strength, high durability, and resists rust and corrosion.

🔨 The soft handguard with ergonomic design, it can help protect from oversrtike and anti-slip, shock-absorb. The comfortable grip and big plate hand protection against glancing blows or missed hits.

🔨 Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut.

Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.

Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.

5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

Includes 3-pc. cold chisels: 1/4, 3/8, 1/2 in.

Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum

Forged and machined from premium, high carbon steel

Package Included: 3 x Flat Chisel | 1 x Center Chisel | 1 x Cylindrical Chisel | 1 x Cone Chisel; package in rolling canvas bag.

Premium Quality: The chisel set are made of CR-V chrome vanadium steel with HRC58 hardness, ensure durability rust resistance.

Precision Ground Blade: The blade is provided with a 30 ° bevel with maximum sharpness and ground.

Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum

Forged and machined from premium, high carbon steel

Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge

3-PIECE HAND CHISEL SET: 3 chisels of varying sizes are included in this chiseling set by Kendo with sizes ranging from 25/32" x 8", 7/8" x 10" and 1" x 12".

ALL PURPOSE: An octagonal cold chisel can be used for a variety of purposes. From chipping away brickwork, concrete, metal and stone to carving wood and masonry work. A size for every need, this 3 set chisel pack supports all your needs.

BUILT TO LAST: Whether you’re a professional carpenter, mechanic, woodworker or a home DIYer looking to complete your tool set, your kit will not be complete without these need these robust forged industrial grade carbon steel chisels.

Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.

Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.

5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"

Available in 12 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.

Heat treated High Carbon Steel provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.

Kit Includes: 1x 1/16'', 1x 1/8'', 2x 5/32'', 1x 1/4'', 1x 5/16'', 1x 3/32'', 1x 5/16'', and 1x 1/4'' Punches, 1x 3/8'',1x 1/2'' and 1x 5/8'' Chisels.

ST CCHL 12PC SET

Accessible packaging enables the customer to easily evalulate products in store

Limited Lifetime Warranty

Cutting edge has been sharpened with a double edge angle and a final honing done using a leather strap.

Both the handle and holster are made from super-durable plastic.

The holster can be attached to both a belt and a button on your work clothes. If your belt is thick, cut away the small pin on the cover.

0.39 inches Round Style shank chisels for heavy duty service work.

9 kinds of different shape Air Hammer Chisel, provided the needs of different jobs.

Excellent quality air hammer chisel, it can used with a pneumatic tool.

Made of heat treated CRV Steel. Forged construction for hardness, durability. Forged and heat-treated ground point provides a concentrated force ideal for breaking large pieces of concrete ​floors, sidewalks, and paving slabs when impractical to use an air hammer.

Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut. Round handle design provides a secure, comfortable grip that allows for easy tool positioning.

Total Length: 12 in (30.5 cm), Handle Length: 5.4 in (13.8 cm), The Length of Chisel Rod: 6.4 in (16.3 cm), The Diameter of Chisel End: 0.77 in (1.96cm), Weight: 1.4 lbs (0.65 kg).

Premium Performance & Quality: Its outstanding demolition performance is a special feature that makes the demolition hammer so popular. It has an impact rate of 1400/min and a motor power of 2200 watts. Supporting powerful functions is a heavy-duty metal structure, symbolizing extreme durability and corrosion resistance.

Including Replacement Chisel: There are four types of chisels: clay spade chisel, scraping chisel, flat chisel, and pointed chisel to meet various construction needs.They are all made of heat-treated alloy steel. Fast assembly and disassembly bring more convenience. Once clamped, it will never fall accidentally.

360° Rotary & Vibration-proof Handle: In order to adapt to different positions in different situations, a 360-degree adjustable front handle is designed. After seeing its excellent adjustment ability, you can't ignore its non-slip rubber, which greatly enhances friction and absorbs vibration, achieving complete control of the electric hammer and a pleasant working experience.

Chrome-molybdenum-vanadium air hardening steel 45CrMoV7

Carefully hardened and tempered along the full length

Striking heads inductively tempered

Compatibility: Standard 0.401-inch chisel shank works with most air hammers

Variety Pack: Includes 5 chisels with different heads

Quality Materials: Made of hardened alloy steel for extended life

GET THE JOB DONE: Use the ABN Power Chisel for concrete demolition jobs and scaling applications; Clean mortar off blocks and tiles and break them apart; Remove glued on engineered wood floor from concrete

USE YOUR PNEUMATIC HAMMER: Use this electric chisel hammer with your existing pneumatic tool; Works with standard pneumatic impact hammers

FITS YOUR AIR TOOL: Round body type on pneumatic hammer chisel with a 0.401-inch (1cm) turn-type shank to fit your air hammer