Best Plastic Miter Saws in 2026

2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

Miter detents at 0, 22.5 and 45 degrees

Die-cast aluminum miter and rip fence

The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability.

15 amp Dual-Field motor keeps the motor cooler, increasing longevity and work efficiency; 4 x 14 cross cut capacity lets you handle any cut needed for the job

Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy

Adjustable rip fence with miter gauge for accurate straight and miter cuts

Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry

Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

Product 1: Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry

Product 2: Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts

Product 2: General purpose blade for wet/dry cutting of ceramic

Product 2: Diamond blade for long-lasting performance with minimal chipping

Product 2: 8730 maximum RPM, arbor size of 0.625 in.

PRECISION BALL BEARING AND LOWER BLADE GUIDES—Ensure consistent tracking for accurate cutting performance

RACK AND PINION TABLE ADJUSTMENT—Makes quick angle adjustments

DUST PORT—Accepts standard 2 ½-inch vacuum hoses, minimizing dust in work area

MITER GAUGE—Guides the workpiece when making crosscuts

STEEL BASE—Stabilizes band saw

BLADE-TRACKING SIGHT WINDOW—Allows you to cut with greater accuracy

Product 1: 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws

Product 2: Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage

Product 2: Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground

Product 2: Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long

Product 1: Lightweight 6.95-pounds design reduces fatigue

Product 2: The Speed Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer

Product 2: Speed Square belongs on every tradesman's tool bench; includes Try Square, Miter Square, saw guide, line scriber, and protractor

Product 2: Includes pocket-sized Swanson Blue Book, a comprehensive guide to help workers make correct angle cuts for any pitched roof

Product 2: Features: 1/4-in spaced scribing notches and the Diamond cutout for easy rafter seat cuts and scribing the most common and popular stud widths

Product 1: 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

Product 2: A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.

Product 2: Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.

Product 2: Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.

Product 2: Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.

Product 1: MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

Product 2: Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

Product 2: 7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

Product 2: 51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Product 2: Dust blower keeps line-of-cut free of sawdust for improved visibility

Product 1: MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

Product 2: HIGH CUTTING EFFICIENCY - The 4-stage orbital function allows smooth cutting ability across different materials and applications.

Product 2: SPEED CONTROL & BRAKE - Variable speed control provides optimal cutting speed for all applications while the brake function is helpful for a precise finish.

Product 2: ANGLED CUTTING - The shoe bevel adjustment allows you to cut at angles.

Product 2: CLEAR VIEW PRECISION - An on/off dust blowing switch gives a clear view of your work so you can easily track the cutting line.

4" x 14" cross cut capacity lets you handle any cut needed for the job

Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy