Best Black Pipe Fittings in 2026

1/2 INCH CLOSE NIPPLE - Our 1/2" black steel pipe nipple is a short length of cast iron pipe fittings with male pipe threads at both ends for connecting pipes and fittings. You can connect this NPT (national pipe thread) 1/2" inch nipple metal piping to 1/2" inch floor flanges, 90 degree elbows, tees, couplings, caps, etc.

RAW IRON: We use 100% top-quality raw material that assures high performance of our pipe decor industrial pipe fittings. Brooklyn Pipe has a wide range of available rang of decorative DIY pipe fittings that can help you with all your projects.

NO CHINA STAMP: Our Close Pipe Nipple doesn't have the word "CHINA" stamped into the close nipple which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market.

METERIAL - This PIPE FLANGE is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability.

SIZE - Our 3 hole black flange is 2-1/2 inches in diameter, the flange can satisfy any home decoration, including various styles.

DESIGN - The vast majority of the market is a four-hole flange, but the three-hole flange will be more perfect support effect which spreads out the payload evenly. You could get creative and add style to any home, office or interior space with LDR pipe decor fittings and connectors. From standard to unique and innovative fittings, the types of furnishings you can create are limitless

SHARKBITE FROST FREE SILLCOCK: Outside faucet valve features an integrated 1/2 inch push-fit inlet and 3/4 inch garden hose outlet; a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing

VERSATILE: Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; ideal for working in tight spaces

EASY TO INSTALL: This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

Connects to 1" threaded pipe on the outside

3/4" threaded pipe on the inside

Pipe threads are plastic

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but still retain the same vintage aesthetic. Accentuate your space no matter what your style is.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choice with Pipe Décor fittings. Make custom industrial shelves to mount to your wall, towel bars, lamps, coat hooks, tables, desks, and much more. Whatever you can imagine you can create. Showcase your own unique sense of style and design.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 M12FLG10PK.

End cap for closing the end of a pipe or tube

Clamp end connection for a non-permanent seal, providing access to lines

Stainless Steel 304 for resistance to corrosion and high temperatures

3/4 INCH BLACK PIPE FLOOR FLANGE 10 PACK: Design ambitious projects for your bedroom, bathroom, kitchen, den, dining room and without worrying about running out of pieces. Stock up so you have the flanges on hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. 4 screw holes secure your flange to floors and walls of nearly any material. Create shelves, hooks, clothing racks, towel bars, table legs, curtain rods and custom furniture.

UNLEASH YOUR CREATIVITY and bring the vintage industrial style into your home, office, garage, workshop or any interior space with Pipe Décor. Choose from our large selection of fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, antique bar decorations, farmhouse and retro themed furniture. Your family, friends and guests will love your custom look.

HIGH QUALITY, DURABLE INDUSTRIAL PIPE FITTINGS. You will know Pipe Décor parts and accessories when you hold them. Beauty and beast. Strength and style. This is real industrial pipe for your decoration and designs or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 365 34FLG10PK.

1 x Adjustable Tri Clamp, 2 x Weld on Ferrules, 1 x FKM Gasket.304 Stainless Steel Material

Clamp Size: 1.5" Tri Clamp, 51mm Flange OD; Ferrule Size: 38mm Pipe OD, 35mm Pipe ID

Gasket Size: 51mm OD, 35mm ID

AUTHENTIC 2 INCH PIPE FLANGES: Our Pipe Décor 4 pack of genuine malleable iron threaded floor flanges are the perfect choice for your DIY needs. Our flanges are the very same quality as those found in your local hardware store but sold for a fraction of the price. Multipack quantity gives great value. Each flange comes with four screw holes allowing you to secure your flange to floors or walls of virtually any material.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choosing with Pipe Décor fittings. Make custom industrial bar furniture, table legs, chairs, shelves and more. Whatever you can imagine you can create.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including: steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 2FLG4PK.

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years.

Wide Application: Our pipe fittings come in 20 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality.

Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws.

Size - Floor Flange Fits Standard 1/2” Threaded Pipes and Fittings. PACKAGE: 10 Pack Flanges. NOTE: These items are PAINTED BLACK.

Material & Products - GeilSpace Pipes and Fittings are designed with a standard industrial finish; materials and threads constructed from sturdy cast iron; Unlike most other products on Amazon with grey looking and oily surface, our products’ surface is black and clean after high temperature paint, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact.

How to use - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes; choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination.

Comes with all the hardware you need to help connect a tailpiece to your disposal or make a repair on your existing disposer.

Compatible with and is a replacement part for InSinkErator parts #1491, #1470, #5490 and is designed for use with tailpiece elbow #88003.

Repair kit for garbage disposals model #333, #17 and #77.

City water connect inlet Hook Up Flange Replace for OE Part Number A01-0169LF, Use For Many Trailer Marine RV Camper Connection to city water hoses.

Specification: Connect to FPT 1/2" threaded pipe on inside, flange Female thread 3"

With check valve backflow preventer in city water hose connection & press-in dust plug as pictured

BRASS P-TRAP: Designed to prevent sewer gas from escaping from a plumbing fixture or drain

HIGH QUALITY MATERIAL: 20-gauge heavy duty brass construction for long-term durability

STANDARD INSTALLATION: Features a 1-1/4-in. inlet and 1-1/4-in. outlet for bathroom sinks

Dual inlet thread for connecting pipe and locknut

High tensile serrated arms

Machined flange for support against tank wall

Easily install without tools - EasyDrain's Flexible P-Trap Pipe is designed to be durable and easy to install, with absolutely no need for tools or expert installation! Simply hand-tighten the included flanges to ensure that you get a proper seal.

Adjustable - Easily adjust your pipe between 13 inches up to 28 1/3 inches to fit any sink environment. The corrugated hose fits 1-1/2 inch sink istallations with a compatible connector that comes in two sizes. 1 ¼ and 7/8 sink drains.

Can be easily removed - Perfectly suited for connecting to your kitchen sink drain, garbage disposal, bathroom sinks, bathtubs and more. Should you run into a clog or need a deep clean, simply remove the p-trap and relief any clogged areas by simply straightening the hose and run water through it into a bucket.

STUB-OUT COVER: Provides an easy and attractive solution for covering rough stub-out water supply pipes

PLUMBING SUPPORT: Wall-mounted cover tube straightens and supports curved PEX pipe

SLEEK DESIGN: Extends 2-3/4-in. from the wall, featuring a polished chrome finish to match existing bathroom hardware

RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet.

Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter.

RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV.

BATH AND KITCHEN P-TRAP: P-trap is designed for use in tubular drain applications, and is equipped with cleanout for pipe drainage; P-trap plays the important role of collecting debris from the sink drain, which would otherwise clog the entire plumbing system if it would pass through

UNIVERSAL: P-traps are up to code and widely used in under sink installation for kitchens and bathrooms

DURABLE: Bathroom P-Trap is constructed of 17-gauge chrome-plated brass for longer-lasting use, and has a high resistance to heat

Includes 2 x 2" Weld-on Fittings, 1 x 2" Clamp, 1 x 2" PTFE Gasket

Fit for all other home brewing stuff sanitary fittings

This Tri Clover Clamp is more easy to install than the flange connection pipe.Easy tighten thumb screw.

All Stainless Steel Construction

Resist Corrosion

Quick Release

STRONG & DURABLE - 30 Pack 1/2 Inch Flange Tees Elbow Pipe Fitting, compatible with standard 1/2 inch pipes nipples. with high strength, good toughness, plasticity and machinability. you can sprayed all mine down with brake cleaner before painting to remove any oil or residue, and then painted to match any project and color scheme.

HASSLE-FREE ASSEMBLY - Our pipe line contains an array of fittings and connectors, can be used with other 1/2 in such as Tees, Pipe, Flange, Cap and so on. Help you complete the DIY project, Provide quality pipe fittings at an affordable price.

ATTRACTIVE & DECORATIVE - can easily to build any shape of frame and shelf for a DIY furniture as you like.Ensures this will be your best bet for a pleasing no-risk purchase.

[SIZE DETAILS]--Tri Clamp fit for 1.77inch(45mm) / 2inch(51mm) tube OD. Flange Size: 2.5"(64mm). package include: 2pcs tri clamp.

[EASY TO INSTALL]--Sanitary tri clamp is easy tighten thumb tcrew and quick to assemble .Heavy Duty for Water, Oil, and Gas. Fits for all other home brew stuff sanitary fittings sanitary hose connections.

[PREMIUM MATERIAL]--Tri clamp made of 304 stainless steel, it's has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body.

All Stainless Steel Construction

Resist Corrosion

Quick Release

PACK OF 10 RUSTIC FLANGES: Use your creativity and transform your boring home or office into a beautiful chic, industrial steam punk vintage style. Our raw iron may need cleaned, sealed, or painted to match your favorite projects. �-Inch flanges are the perfect base for your next coffee table, old-school desk, or artsy home decorations

INDUSTRY APPROVED STANDARDS: We only use the finest materials and proudly meet multiple national standards. Our strong and sturdy floor flanges have been approved by the American Society of Mechanical Engineers under General Purpose Standards B1.20., ASTM A53, & ASTM A733. These Authentic Industrial Fittings were created for plumbing, but have various uses for home decor and artistic crafts!

HEAVY-DUTY MALLEABLE IRON: TSP designed our top-rated pipe fittings with authentic malleable iron to provide you with the strongest flanges originally designed for gas oil air and plumbing applications that create perfect vintage custom furnishings and restoration craft materials for projects such as: spigot coat rack, hanging shower rod, bed frames, table legs, tabletop shelves, mounted toilet paper holders, key holders, farmhouse bookshelfs, decorative home decor piping

Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years.

Wide Application: Our pipe fittings come in 30 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow/tee/pipe flange are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality.

Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws.

Underwater flange and garboard drain plug

Pipe Size: 1/2"

Flange Outside Dimension: 2"

XFITTING For 1/2" CPVC, Pex, and Copper Tubing, (5/8" OD Tubing)

Built-in Sure Grip allows a snug, tight fit around the pipe, providing a rigid setup against the wall surface. It also conceals gaps to maintain a clean and sharp look

The escutcheon plates can be used in a variety of residential and commercial applications and can be installed with water supplies for kitchen faucet, bar sink, toilet, dishwasher, refrigerator, and many more

Machined to fit a boat hull

Grooved to retain bedding compound

Neck threaded approximately 3/8" from the flange