Best Blue Pumps in 2026

All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles

Thoroughly tested for reliable, leak-free performance

Coated seals support seal longevity and durability

Leading Manufacturer Of High-Quality Products

International Renown For Our Diverse Range Of Award-Winning Products

Fully Equipped With State-Of-The-Art Technology

Practical: The ABN Water Pump Sprocket Holder – Half-Moon Aluminum Tool and O-Ring Clip-Retained Bolts for GM Ecotec Vehicle Engine holds the timing chain sprocket and gear in place while removing or installing the water pump on your vehicle

Fitment: For GM Ecotec engines

Half-Moon Design: Special half-moon design allows easier access to water pump gear bolts

Helps Deliver A Reliable Supply Of Fuel To The Engine

Gm-Recommended Replacement Part For Your Gm Vehicles Original Factory Component

Offering The Quality, Reliability, And Durability Of Gm Oe

Helps provide a reliable fuel supply to your vehicleâ€s engine

GM-recommended replacement part for your GM vehicleâ€s original factory component

Offering the quality, reliability, and durability of GM OE

6AN POWER STEERING FITTING 16MM 1.5 AND 18MM 1.5 COMPATIBLE FOR GM HYDRO BOOST PUMP & RACK

These oil pump primer lets you spin the oil pump with a drill motor and bring up the oil pressure and moving the oil to the top of the engine prior to starting the engine, preventing unnecessary wear or damage to rotating and valve train components.

Fits all small and big blocks including popular sizes of 327 350 355 383 388 400 406 427 434 454

Featuring a special billet aluminum sleeve that accurately positions the shaft and keeps it from wobbling.

CNC Machined From Aircraft Grade 6061 T6 Aluminum

The factory oil pickup tube on LS engines is only secured by 1 bolt.This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on the other side of the tube securely holding it in place.

Distributes even clamping force around pickup tube flange by acting as an extension of the flange

Machined from lightweight 6061-T6 aluminum, black anodized and laser-marked

Distributes even clamping force around pickup tube flange by acting as an extension of the flange

High-strength Class 10.9 M6 flange screws, zinc plated

Saginaw P Series power steering pump is built using the highest-quality brand new components to ensure long-lasting performance and reliability

Compatible with GM Vehicles GMC Chevrolet Chevy Buick Oldsmobile Pontiac

Comes with complete billet aluminum cap and this is the pump used in most GM vehicles from 1955 to 1976 and commonly used for many engine swaps and hotrods

FIT FOR: 66-74 GM Chevy Chevrolet (For detailed models, please refer to the product description).

FUNCTION: Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation.

PERFORMANCE: Pump Pressure is 1200-1450 PSI with a 1.3-3.2 GPM Flow Rate.

Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy)

The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place.

DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes).

Work fit for chevrolet GMC Avalanche Express Silverado Suburban Yukon Sierra Tahoe 1500 2500/ LS LT Truck LSX 4.8L 5.3L 6.0L V8

Made of 6061 T6 aluminum with high material, anti-corrosion, rust prevention and long service life.

Provide additional support to ensure that the pipe does not become loose. A clip is placed on the other side of the pipe to fix it in place, which solves the problem of poor sealing of the oil pump caused by only one screw.

【Fitment】for Chevrolet Silverado 1500/ Suburban 1500/ Tahoe/Colorado,for Cadillac Escalade,for GMC Sierra 1500/Yukon XL,for Buick Rainier

【Quality & Performance】Each of HARUMA oil pumps uses the highest quality materials and the latest technology to achieve the highest production standards. HARUMA is committed to providing customers with the highest level of quality and performance.

【Installation】Easy to install. Minimize the damage to the engine, no abnormal noise, and no oil leakage.

Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley

Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum

Compatible with: all GM LS series engine blocks

GM Type 2 (Saginaw TC series); CW driven, 17mm (0.665") shaft

Flow rate: 3.5 GPM flow rate; Pre-set pressure at 1,200 PSI

Cad plated AN fittings pre-installed

Right for your vehicle and lifestyle

Product type :AUTO PART

Package dimensions :17.78 cm L x23.622 cm W x27.178 cm H

Compatible with GM, MERCURY, OMC, VOLVO and many more... Please verify your OEM part number from your original unit to help ensure fitment.

Replaces: REPLACESMERCURY 67859, 17670, 811573OMC 387447VOLVO 3855991OE 850454R1SIERRA 18-3577 18-3574 MALLORY 9-42604 MES WP415M HIGH QUALITY FEATURES OF THIS WATER PUMP: BI-DIRECTIONALSTAINLESS STEEL ...

Replaces: SHAFTSTAINLESS STELL PULLEYSTAINLESS STEEL HUBBRASS IMPELLERBRASS/STAINLESS STEEL HARDWARE 100% BRAND NEW ...

【Compatible with】Fits SB/BB Chevy V8 & V6 Engines. Fits all small and big blocks including popular sizes of (283 307 327 350 355 383 388 396 400 402 406 427 434 454)

【Function】Use for prime the lubricating system of a rebuilt engine prior to its first start to prevent the damage of a dry start.

【How it works】Works by connecting to the oil pump shaft through the distributor hole and inserting in oil pump.

Reduces fluid flow from 3 gpm to 2 gpm

Use with GM "type 1" power steering pumps

Converts 16mm O-ring to 5/8" inverted flare

An excellent quality (alternative to the Kent Moore J-43651)

water pump holding tool that retains the coolant pump sprocket that is

part of the timing chain system in position, during pump removal / installation, without the timing

Fit: SB/BB Chevy V8 & Chevy V6 Engines, fits all small and big blocks including popular sizes of 327 350 355 383 388 400 406 427 434 454.

Thick shaft design with triangle shaped end for no slippage. For use with 3/8" or 1/2" chuck hand drill.

The oil pump primer lets you spin the oil pump with a drill motor and bring up the oil pressure and moving the oil to the top of the engine prior to starting the engine, preventing unnecessary wear or damage to rotating and valve train components.

Fits: GM V8 454 7.4L / 502 8.2L Big Block (Bolts to raw water pump)

Replaces: Mercruiser 861677T / 818383T / Sierra 18-8860

Specifications: Outlet 6 O'clock, Inlet 9 O'clock Bolts to raw water pump

【OEM Fit & Replace】Compatible for GM V6 3800 SII & SIII 3.8L Engines, 2000-05 Impala/98-05 Monte Carlo/95-02 Camaro/98-99 Lumina, LaCrosse/Allure/Regal/LeSabre, Bonneville/Grand Prix/Firebird, Olds 88/98/Regency. Interchange: 88926207, 19209288, 89060462, 12482903, 89018214, 251-718, 252-693, WP-9016, AW5075, 42097. Please Use Amazon Part Finder to Ensure Application.

【Real OE-standard】VIPCAR Water Pump was supplied by ISO/TS16949 certified OEM factory(OE supplier), engineered and assembled in accordance with international automotive spare parts standard specifications from high-quality materials, used the state-of-art gear and gerotor technology to provide great quality and help extend the life of the engine. Real Meet or Exceed OE standards.

【Specialized Ex-Factory Tests】VIPCAR water pump passed a series of strict tests in our RD center, such as Pressure/Flow/High-Low Temperature Fatigue/Metallographic Detection Device/Salt Spray Test/Swing Machine, Rockwell/Brinell/Shore Hardness, etc, designed to simulate and duplicate actual engine working conditions to ensure correct, long-lasting, and efficient performance every time in every operation.

Hign Quality & Hign Performance-Manufactured from high quality materials , meets or exceeds OEM standards and very stable, 100% tested before shipping.Not easily broken more durable.This Cooling Water Pump Exquisite workmanship, anti-corrosion and wear resistance.

Replacement Cooling Water Pump-Circulate coolant from the inverter to the radiator when the car is turned on.In the cylinder of an automobile engine, a radiator placed at the front of the automobile.When the car just started (cold car), do not open, so that the cooling water does not go through the tank, only in the engine cycle, the temperature of the engine to be started up to 80 degrees or more, open, the hot water in the engine is pumped into the tank, take away the heat by cool wind.

Reference OE Part Number-1K0 965 561 J, 1K0 965 561J , 1K0965561J .Even though it is not a genuine GM part, but it works even better and last longer at a much lower price.

Product Type :Auto Part

Package Dimensions :18.796 Cm L X12.7 Cm W X12.7 Cm H

Country Of Origin :United States

Compatible with GM, MERCURY, OMC, VOLVO and many more... Please verify your OEM part number from your original unit to help ensure fitment.

Replaces: REPLACESMERCURY 67859, 17670, 811573OMC 387447VOLVO 3855991OE 850454R1SIERRA 18-3577 18-3574 MALLORY 9-42604 MES WP415M HIGH QUALITY FEATURES OF THIS WATER PUMP: BI-DIRECTIONALSTAINLESS STEEL ...

Replaces: SHAFTSTAINLESS STELL PULLEYSTAINLESS STEEL HUBBRASS IMPELLERBRASS/STAINLESS STEEL HARDWARE 100% BRAND NEW ...

【Notices Before Order】There might be Many Choices for GM [90°V6 4.3L] & Small Block V8 [5.0 5.7L] Engine Oil Pumps. For Any problems or uncertainty in verifying the fitment for your specific vehicle, please contact us immediately or use the Amazon Parts Finder at the top of this page to ensure your application.

【OEM Fit & Replace】VIPCAR Professional engine oil pumps compatible with GM [90°V6 4.3L] & Small Block V8 [5.0 5.7L] Engine, 1999-2013 Silverado(Sierra)1500 4.3L, 94-96 Impala 5.7L, Tahoe/Yukon/Blazer/Caprice/Astro/Corvette, G10-3500 Express/Savana Vans, C/K10-3500 Trucks. Interchange Oil Pump Part Number: M-155, 12555283, 8125552830, 93442037.

【Real Meet OE Standard】Every VIPCAR oil pump was engineered and assembled in accordance with international automotive spare parts standard from high-quality materials and used the latest gear and gerotor technology to provide the top quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient operation. Real meet or exceed OE standards.

FITMENT: This girdle is compatible with 1997-2014 LS series engines, small block V8 GEN. III/IV (LS based).

INSTRUCTION: The pickup tube is fastened to the oil pump by a single bolt and leaves the other bolt hole unused.

RELIABLE QUALITY: The girdle is CNC machined from aluminum and hard anodized for corrosion resistance.

Genuine Oem:Yes, Category 2:Power Steering Pump & Hoses, Superseded Part Number:22925598, Part Ref# On Diagram:ONLY PART REFERENCE #1 ON THE DIAGRAM IS

Brand:GM, Fitment Type:Direct Replacement, Other Part Number:22925598, 22855674, Quantity Needed:1

Manufacturer Part Number:25805706, Category 3:Power Steering Pump & Hoses, Item Name:Power Steering Oil Cooler, Category 1:Steering