Best Silver Punches in 2026

PRECISION PUNCHING – Professional-grade, 2-3 hole metal punch is specially designed for accurate, manual hole punching. Trust this punch for perfectly professional precision.

PATENTED PINS – Professional punch uses precise, patented pin technology for consistently accurate performance.

10-SHEET CAPACITY – Punch creates clean and precise, 9/32" holes, piercing through up to 10 sheets of paper.

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4",1-1/2",2"

Capacity: Mild steel plate through 10 gauge (3.5mm) Works to punch Mild steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and plastic.

Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works great in tight areas. Punch dies feature laser engraved alignment marks for easy and precise positioning.

[MULTI-PURPOSE 3 IN 1 STAPLE GUN KIT] Special binding groove allows easily insertion of Door-type, U-shaped, T-type three-in-one manual staples are ideal for repair, decoration and fastening to meet your various tacking needs.

[RUGGED AND DURABLE] It adopts 5.86mm large all-steel fixed column, high-strength chrome steel body, surface plating treatment, durable and not easy to damage, no rust.

[INCLUDED 3 DIFFERENT NAILS] Comes with 2000pcs Door-type, 500pcs U-type, 500pcs T-type staples to meet your different needs. (D-Type 11x8 mm ; U-Type 6x12 mm ; T-Type 2x10 mm) Ideal for repairing, decoration and fastening.

MANUAL KNOCKOUT KIT: Made for use with the new Greenlee KRW-1 High-Leverage Ratchet Wrench and includes 1/2", 3/4", 1", and 1-1/4" slug buster punches and dies, draw studs, and a carrying case

PUNCHES A VARIETY OF MATERIAL: Makes it easy to create punch holes for most conduit sizes in mild steel, up to 10-gauge aluminum, brass, copper, fiberglass, and plastics

USER-FRIENDLY DESIGN: Slug-Buster punch profile allows for easier slug removal, and the ergonomic knurled edge on the punches provides a firm, comfortable grip during use

Punch size: 1/2",3/4",1",1-1/4",1-1/2",2"

Capacity: Mild steel plate up through 3.5mm(10 gauge)

Operation: Battery,hydraulic,ratchet or manual drivers, when used with ratchet, hydraulic or battery drivers,buy the punch and die only,the draw stud is part of the driver kit.

Product Type: Manual Hole Punch

Punch Size: 1/4"

Paper Punch Capacity: 65 lb Paper

❤️ 3-Piece Craft Hole Punch: Including circle, heart, star, each hole punch can punch circle, star, heart with a diameter of about 1 inch. Easy and comfortable to use, allowing you to easily get crisp shapes from cardstock or glitter paper.

❤️ Precise Cutting: Made of high quality ZBS+zinc alloy. This round punch has a zinc alloy blade inside a plastic body with a lever-style handle to punch your paper cleanly, saving you the hassle of manual cutting.

❤️ Size: The punch for the paper craft package includes 3 different patterns and the size is 2.4x1.8x2.8inch. The shell color is shipped randomly.

Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.

Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"), drilling holes from 0.86" to 2.36", fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 0.13"; Max thickness for stainless steel: 0.08".

Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.

★<b>3-in-1 Staple Gun Kit </b> - D-shaped, U-shaped, T-shaped, three types of manual staples are ideal for outdoor and indoor repair, decoration and fastening to meet your different renovation needs

★<b>Easy to Operate</b> - The gun has an ergonomic hand slot that was designed to minimize the pain your hands face when you spend time stapling, adopting the principle of spring spring-back impact, long-lasting durability

★<b>Quick-Jam-Clear</b> - When the staple gun is stuck, the binding switch can be pulled down. Matching stapler remover can help clear the jammed staples quickly, Card slot reset to continue using

You will get : You will get 4 pcs paper punches in different shape patterns, including circle punch, star punch, heart punch, Flower Shape punch, different patterns

Material: The punch is made of ABS and alloy, the craft punch measures approx 2.76 * 1.8* 2.20" and the cut-out is approx 1 inch(2.2--5cm)

Easy to use: The spring lever of this process puncher is designed to make the process circle easy to use, clearly with clean edge.

Mini Scrapbook Paper Puncher 37 pc including a case and manual tool to punch through paper

Easy to use and easily cuts through cardstock

Keep all DIY Craft Punchers organized in a travel case

Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quartzite, conduit (NOT FOR Stainless Steel, Wood, Drywall)

Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction.

Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts

[Complete Punch Tools]: Hydraulic punch tool kit features 1pc 15-ton pump, 2pcs draw studs, 2pcs piston shaft, 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects

[Efficient Hydraulic Design]: Hydraulic mechanism pump produces 15T strong pressure for providing high punching accuracy and fast punching speed which is 10 times much faster than common wrenches, more labor-saving on punching uniform holes; pump with pressure hose for adjusting the angle of the ram flexibly to meet your punching needs, perfect for using in narrow places

[Sturdy Steel Construction]: 40Cr steel dies and 45# steel pump body for ensuring high strength, sturdiness and durability, stable construction is suitable for heavy-duty and frequent punching works

This machine is mainly aimed at leather handcraft workers, used for punching, pronging and stamping process, improving efficiency and working quality

With different accessories to achieve multi-function, Quick installation and easy operation

If the clamp is difficult to move up and adjust, please use a single-blade screwdriver to properly pry off the clamp part, which makes it easier to adjust the height of the clamp

Smooth operation, clean hole edges, round and lovely holes, uniform hole size, easy to use, light and effortless.

Long handle, easy to use, ergonomic structure, maximizing human capital savings, saving time, with this manual punching machine, drilling worry-free.

Punch size: 1/2",3/4",1",1-1/4",1-1/2",2"

💎【Punch Smoothly】 Smooth operation, clean hole edges, round and lovely holes, uniform hole size, easy to use, light and effortless.

💎【Humanized Design】Long handle, easy to use, ergonomic structure, maximizing human capital savings, saving time, with this manual punching machine, drilling worry-free.

💎【Six Punches】22.5mm / 0.9inch, 28.3mm / 1.1inch, 34.6mm / 1.4inch, 43.2mm / 1.7inch, 49.6mm / 2.0inch, 61.5mm / 2.4 inch

【Support 1.2”/30mm Maximum Thickness】IRONWALLS commercial corner rounder machine can accommodate up to 1.2in (30mm) cutting thickness, which can cut more paper corner or thicker paper corner at once, time & labor saving.

【R6mm & R10mm Interchangeable Cutting Dies】Coming with standard cutting dies: R6mm (1/4”), R10MM (3/8”), these cutting dies are made by premium carbide steel, which is sharp, tough and not easy to deform. Please note that R6 fillet radius is 6MM, R10 fillet radius is 10MM.

【Heavy Duty A3 Steel Machine Body】This tabletop corner cutter machine for paper crafts is constructed with A3 steel, which offers high stability and safety while cutting paper corners.

【Hollow punch set】9 individual punches in sizes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm with free cutting pads that are placed below the material to protect the edge of the punch.

【Sharper knife edge】The punch set is made of manual grinding knife edge with more precise groove and edge. It is made of 45 high carbon steel heat treatment, which is more durable and sharper.

【Anti-slip design】 Knurled design for handle grip and size for each punch for easy reading.

Heavy-duty design pierces cleanly through 30 sheets of paper

Centering guide with measurements aligns papers for consistent performance

Removable chip tray ensures clean, simple disposal

Round standard metal punch units are complete units consist of punch, die and draw stud

Use with battery-powered, hydraulic, ratchet or manual drivers

Properly assembled through pilot holes, they will make clean, fast and accurate holes

Knockout Punch Driver Tool Kit: Standard output pressure: 8 tons. maximum output pressure 12 tons. It is a knockout punch set with a separable hydraulic pump.. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.

Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"), drilling holes from 0.885" to 2.416", fully meeting your needs. Two draw bolts are solid and built to last. 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.

Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.

※ This Leather Hole Puncher is a Heavy Duty Leather Stamping Machine for DIY Leather Craft Punching Holes, Mainly Aimed at Leather Handcraft Workers for Punching, Pronging and Stamping Process. Equip with Drill Chuck, Various tools can be fixed to achieve the functions you need.

※ Compared to other punching machine of the same shape on the market,We upgraded the material of the equipment base to ductile iron, which is stronger and more durable than ordinary cast iron base, reducing the risk of fracture. We use solid round steel cylindrical mandrel presses, which is more durable, not deformed, and not loose compared to the empty tube columns sold on the market. Long-term use maintains good accuracy.Maximum pressing pressure: 160 kg.

※ We offer 2 different punching machines, round and square. There are 4 versions with accessories and without accessories, and the price is different. Please make sure before ordering to prevent wrong purchase.The square punching machine adopts a widened rack to increase the strength and improve the downforce. The circular punching machine is equipped with a guide groove to increase the accuracy and improve the accuracy of repeated use, and it is not easy to deviate.

【Durable Dies & Punches Set】 ½", ¾", 1", 1¼", 1½", 2". fits ½", ¾", 1", 1¼", 1½", 2" Conduit Size.

【Wide Application】 This manual metal stud punching tool cuts round regular , flat cuts without burrs. Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic, etc.(Max thickness for steel: 1/8"; Max thickness for stainless steel: 1/16".)

【Humanized Design】Long handle, easy to use, ergonomic structure, maximizing human capital savings, saving time, with this manual punching machine, drilling worry-free. Toolbox compact size, light weight, easy to carry and storage.

【Leather Puncher】This leather puncher is a heavy duty leather puncher for DIY leather craft punching. Mainly for the leather handicraft personnel for punching, punching, stamping processing.

【Effort-saving and high-efficiency】 The use of labor-saving spring, repeated pressing is not fatigued, and the operation is simple. High-strength socket head cap screws, more durable and firm, improve work efficiency and quality.

【Specification】 Rack width: 22mm; Die hole diameter: 11mm (M12 thread); Bottom plate big round hole diameter (feed hole): 27mm; Drill chuck clamping range: 1.5-13mm; Machine column lifting height: 0-16CM .

The contractor's choice -worldwide

Unique punch profile also splits slugs for easier slug removal

Use with battery-powered, hydraulic, ratchet or manual drivers

Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage.

Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8"; Max thickness for stainless steel: 1/16".

Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.

1/2" CONDUIT KNOCKOUT PUNCH: Makes it quick and easy to punch conduit up to 1/2" (0.89" or 22.5 mm.) in size to create clean, precision holes every time

PUNCHES A VARIETY OF MATERIAL: Optimized for mild steel and has a limited stainless steel capacity, and it can also punch brass, copper, aluminum, fiberglass, and plastics

EASY SLUG REMOVAL: Features a unique punch profile that effortlessly splits slugs to allow for easy slug removal to help you get the job done faster than ever

Includes 9 sets of round punches and dies, from 1/8" to 5/8" round.

6.25" THROAT DEPTH: Allows you to punch practically any part of a given piece of material.

ADDED STRENGTH: Made from heavy-duty 1.5" steel plate, and weighs an impressive 178 pounds.

This manual punching machine is used for punching, pronging and stamping process.

Leather hole puncher is with drill chuck to achieve multi-function, you can install many kinds punching tools on it for different artcraft request.

Different wrench and spanner tools are included for quick installation and easy operation

Round standard metal punch units are complete units consist of punch, die and draw stud

Use with battery-powered, Hydraulic, ratchet or manual drivers

Properly assembled through pilot holes, They will make clean, fast and accurate holes