Best Taien Pushbutton Switches Switches in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Black Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Latching Push Button Switch: Press the button - POWER ON, Release your finger - Maintain POWER ON, Press the button again - POWER OFF. It's SPST Normal Open Self-Locking Pushbutton not Momentary.

12mm Panel Mounting Hole Size, Φ9.5mm dia. High Round shape Button with Power Symbol, and Φ13.8mm dia. Bezel.

The switch with Wire Harness for easier connection of circuit. Green wires for SWITCH+ and SWITCH-,RED and Black wires for LED (LED doesn't distinguish between positive and negative).

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Stainless Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Latching Push Button Switch: Press the button - POWER ON, Release your finger - Maintain POWER ON, Press the button again - POWER OFF. It's SPST Normal Open Self-Locking Pushbutton Switch not Momentary.

12mm Push Button Switch with High Round shape Button and Power Symbol, Aluminum anodized Black Metal Push Button switch.

12V Push Button Switch with Wire Harness for easier connection of circuit. Green wires for SWITCH+ and SWITCH-, RED and Black wires for BLUE LED (LED doesn't distinguish between positive and negative).

Specification: Latching push button switch 12v on off function with blue LED ring illuminated. Silver shell metal push button switch requires 19mm (about 3/4 inch) mounting hole size. Rating: 5A 12V DC; 5A 250V AC.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

Wire Harness: The package of the led push button switch also contains becoming wire harness for the round 19mm push button switch, the clasp design of the wire harness make it easy to install and remove.

DaierTek 16mm Momentary Push Button Switch; Black with Blue LED Lights; Switch rating: 5A 12V DC, Hole size required: 5/8''/16mm, Switch Head Diameter: 18.9mm.

16mm Momentary switch: Push it, ON; Finger loose, OFF. If you want to use it in an AC environment, please connect a 150KΩ resistor in series to the LED pin.

Momentary Push Button Switch with Blue LED Lights. Operating Life ≥ 500,000 Cycles.

Latching Push Button Switch, 5 PIN ON OFF 1NO, 1NC, Maintained, Push it, ON(Keep ON after you release your finger / Self-Locking); Push it again, OFF; 50 ICON Push Button Switch Labels for DIY use.

12V Push Button Switch with DC 12 Volt Blue LED illuminated. If you use it in an 120V environment, please connect a 150KΩ resistor in series to the LED pin.

Waterproof Push Button Switch IP65 degree sealed, can be used in wet or dusty enviroment. Aluminum Anodized Black Metal Push Button Switch

Self-Locking Version: Latching push button switch 12V with ON OFF SPDT (1NC 1NO) latch function flat button design. The panel mounting hole dia. of this metal push button switch is 22mm (about 7/8 inch) with 5A 12VDC rating.

12 Volt Blue LED: The 22mm push button switch with 12V blue LED ring Halo illuminated design, which can help you easily locate the 12v switch when you are surrounded in the dark.

Wiring Harness: The 5 pin push button switch contains wiring harness, It's with 5 wires and 0.6 inch length, the clasp design of the wire harness make it easy to install and remove.

16mm OFF-Momentary ON Push Button Switch with Black Metal Shell; Switch Rating: 3A 250VAC;5A 12VDC.

16mm Momentary push button switch: Push it, ON; Finger Release, OFF.

Mounting Hole: This Push Button Switch Momentary Required: 5/8'' (16mm) Cut-out diameter, Switch Head Diameter: 19mm with Round Flat Shape Actuator.

Push Button Switch 12V: Metal latching push button switch, black shell red ring LED illuminated, SPDT 1 NO 1 NC design, which performances as push to switch ON, and push again to switch OFF.

Rating & Mounting Hole Size: Rating: 5A, 12v lighted push button switch. The mounting hole size for this latching push button switch 12v marine is 19mm.

Wiring Harness: The wire socket that come with this 12 volt push button switch is clasp design, which not only makes the connection between wire socket and switch stable, but also makes the socket become easier to remove from the push button light switch.