Best Bosch Rotary Lasers in 2026

⭐【Fully Layout with 3 x 360° Line Lasers】: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐【Dual Power Methods & Type-C Charging Port】: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

High Visibility-- The green laser level line is 4x brightness than the red beam, which can provide a working distance of up to 100ft, available outdoors. Safety level-Class II, <1mW power output

3x360° Full Layout-- 1x360° HORIZONTAL LINE & 2x360° VERTICAL LINES cover all around the room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line

Remote Control & Rechargeable-- With the remote control, your alignment job becomes simple and fast. Type-C charging saves you the trouble of changing batteries

GREEN LASER [200 to 330 FT] — Bright green beams up to 4X brighter than standard red beams. This 3-plane level tool has an accurate range of ±3/32” at 30ft – providing high visibility in a working range up to 200ft diameter in standard setting, or at an extended range of up to 330ft diameter when used with the compatible LR8 laser receiver (sold separately).

COMMERCIAL GRADE — One of Bosch’s most popular 3-planes laser levels for construction. Excellent laser level tool for most commercial projects indoor and certain outdoor conditions. Projects highly visible and accurate green laser chalk lines. Ideal for projects that require precise leveling, plumbing, and squaring measurements from floor to wall to ceiling. For dual power technology, the included Bosch 12 V Max Lithium-ion battery comes with a charger so you can quickly replace & recharge when necessary. Also comes with a built-in over-molded construction IP54 to ensure splash water/dust protection for years of dependable operation.

BLUETOOTH CONNECTIVITY — Comes with built-in Bluetooth connectivity. Users can control the setup of the laser from across the room with their smart phone and the free Bosch Leveling Remote App. Easily turn the leveling laser and receiver mode on and off, select the laser planes, adjust line visibility and provide battery and level alerts right from the touch of your phone.

TURNKEY SOLUTION: The 99-006K self-leveling rotary laser system includes a soft carrying case (laser only); a 13’ grade rod; LED one sided detector; a contractor grade tripod; freestanding target; a drop-ceiling bracket; and laser glasses. Dimensions: 6.61" x 4.96" x 6.69"

EXTERIOR RESIDENTIAL: Great for leveling forms and footings; aligning fence posts; grading/excavation; or laying out retaining walls; planting beds; and more. Rotation Speeds: 200; 400; 600 RPM. Laser Wavelength: 635nm±10nm (Red)

VERTICAL AND HORIZONTAL USE: Use vertically for laying out walls and floors; or installing metal drywall track. Use horizontally to install wainscoting; drop ceilings; or for leveling cabinets. Interior Range- Up to 200 ft. diameter depending upon light conditions. Exterior Range- Up to 800 ft. diameter with detector (included in 40-6516 and 40-6517)

MULTI-PURPOSE LASER: Grading, excavating and general construction projects are perfect applications for the RL-H5A. With the IP66 rating, the RL-H5A is "job site tough" and can withstand dust, a sudden shower and even torrential rainfall.

EASY TO USE: With electronic self-leveling, you press the power button and go right to work in seconds. If the RL-H5A gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 arc seconds.

LONG RANGE WITH HIGH ACCURACY: Need to shoot elevations up to 800 m from your laser? No problem - this instrument has the power and range to cover a 800 m diameter job site.

PROJECTS UP TO 65 FT - The laser level tool projects a bright red continuous horizontal line all the way around a room.

SELF-LEVELING - Our laser level automatically levels to cuts out any guesswork.

CONVENIENT CHARGING - The integrated rechargeable Lithium-Ion battery has a convenient micro-USB charging port and indicators that show how much battery life is left.

Increases productivity with faster setups, fewer mechanical parts, and automatic self-leveling

Easy, one-button operation requires minimal training for using tool

Complete leveling crew in one portable hard shelled carrying case; Tripod not included

【Fully Layout with 2 x 360° Line Lasers】-- OMMO Laser Level have 1x360° Horizontal Line, 1x360° Vertical Line, 8 laser lines cover the floor, walls and ceiling all around the room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line.

【Hign Precision&Visibility】-- Our green laser level takes upgraded diode and chip tech with bright, clear, focused green lines laser, provides visibility up to 150 feet, more accurate and reliable than traditional line drawing methods, while leaving no marks on furniture or walls, idel for indoor and outdoor decoration, whether DIY makers or professional worker, this line laser will make your job easier and convenient.

【Self Leveling Feature】-- Switch the Power ON / OFF button on the side，it's on the self leveling mode, and you’ll get a bright, high-accuracy horizontal and vertical line projected on any flat surface within 3° of horizontal/vertical. The laser will flash and beep as a warning if it’s not within 3° of level. And the alarm wouldn't be turned off until we put it in a level place.

✔️HUEPAR DEDICATED RECEIVER- Huepar LR-6RG receiver can ONLY be used with Huepar Line Laser Levels that feature Pulse Mode Function. Please pay attention to that this receiver can NOT be used with Rotary Laser Level. And the receiver can NOT be used with Huepr 9011G&9211G laser level. It is recommended to use in accompany with Huepar 902CG/901CG/8211G/BOX-1G/BOX-1R/GF360G/HM03CG/S03CG/S04CG/S03DG/LS04CG/LS03CG/LS41G/GF360R/622CG/622CR/621CG/621CR/603CG/603CR/602CG/602CR/DT03 Laser Level, etc.

✔️AVAILABLE FOR RED AND GREEN PULSE LASER- It is necessary to Turn ON the Pulse Mode of the laser level when using with Huepar LR-6RG laser receiver. This receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200ft (60m).

✔️CLEAR MULTI-SIDED READOUTS- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.

🔎【3X360° Lasers Full Layout】 1x360° horizontal and 2x360° vertical , which can cover all around the room. "H" stands for horizontal laser, "V" stands for vertical laser, you can easily switch any laser you want.

🔎【5200 mAh Large Capacity Battery】The line lasers is equipped with a large-capacity battery, which can working up to 8h. When the battery power is low, the battery indicator will turn from green to red, IKOVWUK also comes with charger, charger indicator on red - charging; charger indicator on green - charging completed.

🔎【Self / Manual Leveling Mode】Turn on the power to self-leveling mode, the cross line laser will be automatically leveled within 3°, otherwise the cross line laser will send out an alarm with the lasers flashing. Keep the power off, press and hold the brightness button for 3s to turn on/off the manual leveling mode, which can be placed at any angle of use.

Laser level tool comes with green beam for enhanced visibility and range

Laser level tool includes cross Line and 3 Spot

DEWALT green laser level has full Time pulse mode for use with a detector (DW088CG)

▲ADJUSTABLE TELESCOPING POLE: The Firecore FLP370C laser mounting pole offers easy placement at virtually any height between floor and ceiling, making it the perfect telescoping pole for using your laser tools at any jobsite. Including 4 telescopic rods and a telescopic tail rod. The graduations are marked in black on the yellow pole in inches and centimeters and it has 3.7m/12.14ft when fully assembled with all sections and both end parts.

▲MULTI-FUNCTION MOUNTING BRACKET: Mounting Bracket with 1/4"-20 Male Thread and 5/8"-11 Thread Adapter, compatible with most line lasers and rotary lasers. The adjustable bracket allows you to position your laser tool at various heights on the pole. With a Height Fine-tuning knob, the fine-tuning range is 7cm/2.75" and can be adjusted within 5cm/1.97" in depth.

▲STABLE TRIPOD WITH BUILT-IN BUBBLE: Made of standard aluminum with heavy-duty, plastic joints and ribbed, rubber feet, this tripod is made to provide long-lasting strength and use. Two-section legs height adjustment buckle to meet your different needs. While a screw clamp on the side of the head stabilizes the pole so that it won’t shift. In addition, there is a small bubble level embedded in the head to ensure that your measurements will be as accurate as possible.

Selectable horizontal/vertical cross reference lines required for level, align and plumb applications

12V max CXT battery delivers the convenience of a rechargeable tool battery and up to 20 hours of continuous run time

Red Line visibility range up to 82’ depending on ambient light and detectable up to 262' With Makita laser detector LE00855702 (sold separately)

✅【Great Brightness and High Accuracy】: With the green laser beam technology, the Inspiritech TG-5LR-1 self-leveling laser level is 2 times brighter than the common red lasers. It uses a durable and stable high intensity laser transmitter which makes the laser line brighter and goes further . It provides solutions for a wide range of applications such as for construction, picture hanging, cabinet installation, ceiling works and all kinds of home renovation projects.

✅【 Full Layout with 1 Horizontal and 2 Vertical Lines】: One 110° horizontal and two 360° vertical planes cover the floor, walls and ceiling all around your working space. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish the square layouts on the ceiling. A 360° manually rotary base allows users to adjust the projection direction of the horizontal laser line, making it possible for a 360° horizontal leveling around the room.

✅【Self-leveling and Manual Mode】: This laser level self-levels within 3° and indicates out-of-level by flashing and beeping for inclines over 3°. A bubble indicator on the top of the laser level helps indicate if the it is placed on a level surface. Switching to Manual Mode by holding down the “OUT” key for 3 seconds will deactivate the self-leveling function and lock the pendulum so the user can position the laser tool at any angle to project non-level straight lines without any indications.

COMPREHENSIVE KIT: includes GRL900-20HV rotary laser, laser receiver, remote control, head unit case, 8ft. grade rod, wall mount, laser glasses, target card, and hard carrying case

MULTIPLE HORIZONTAL APPLICATIONS: use for site preparation, stake-out for pouring concrete foundations/slabs, setting concrete forms for commercial or large residential construction, underground utility work including plumbing and more

VERTICAL APPLICATIONS: provides a vertical beam and 90° point for wall layout, framing, windows and door installation, stud framing and more

✅ 【3D Full Layout with 5 Lines】 The Inspiritech TR-5LP-1 cross-line laser level is able to produce 1 horizontal and 4 vertical laser lines, either individually or at the same time,covering the floor, walls and ceiling all around your working spaces. Compared to the ordinary 2-line laser levels, this 5-line laser level gives more lines and more extended reach.Two 360°vertical lines cross at 90°on the ceiling helps users quickly visualize and finish the square layouts on the ceiling.

✅ 【Self-Leveling & Manual Mode】TR-5LP-1 is a self-leveling laser level that automatically finds and maintains a level when placed on an inclined surface within 3 °. It indicates with flashing and beeping for inclines over 3°. The supporting feet under the base can be adjusted to enable the laser level to work properly on an uneven surface.The Manual Mode will lock the pendulum so it can be positioned at any angle to project non-level straight lines without indications.

✅ 【Multifunctional Leveling Tool】 The 360° rotary base allows users to adjust the projection direction of the horizontal line, making it possible for 360° horizontal leveling around the room. This enables you to line up the exact horizontal and vertical coordinates of your project with ease, making your job quicker and easier. Using the plumb dot under the unit and the cross point of lines on the ceiling, this laser level also projects up&down centered points on the floor and ceiling.

【High Performance Sensor】 Equipped with 4 remote control light receiving parts, our Iglobalbuy rotary laser level is 360° rotatable and has the function of 5° automatic alignment. IP54 dustproof and waterproof design, it will not cause any problems even in harsh environments.

【Automatic Alignment】 This self-leveling rotary laser level can align automatically. In self-leveling mode, when the laser exceeds the self-leveling range (±5°), the line laser level beeps and the beam flashes quickly.

【500m Beam Visibility】 Exterior working range can be up to 500mm diameter with detector; Red beam has strong stability, low power consumption and high cost performance. Red beam is more suitable for indoor use.

4 X 360° green laser line: Takamine GM160 pro laser level has 2 horizontal 360° planes (the one on the ground can hit a 1/2" ultra-low horizontal line, and the one on the top can hit the lowest 4" horizontal line from the top surface), 2 vertical 360° plane with 16 laser lines can cover the floor, wall and ceiling around the room. The horizontal and vertical lines intersect at an angle of 90° to help you quickly visualize and complete the square layout.

Ground/wall use and multiple installation methods: This line laser provides a 1/4" mounting thread for fixing on tripod or mounting pole. Equipped with 360° free rotating base, it can be rotated to desired angle. The base also has 1/4"-20 and 5/8"-11 mounting threads to adapt different tripod. It' equipped with a patented bracket that can be adjusted universally，which is currently the most adjustable in the market. It can be fixed to wall by magnetism or screws, so it can be used in more scenes

This self-leveling laser level adopts the SHARP green laser unit from Japan, which has excellent brightness and higher stability. Under the same lighting conditions, the green beam is twice as bright as the red laser, with a working range of up to 130 feet (100 LUX), and an accuracy of 33 feet ± 1/9 inch. Using the Takamine line laser receiver in strong light or outdoor conditions, the outdoor pulse mode helps to extend the laser range to 200 feet.

🌞4x360° LINE LASERS&PULSE MODE(RECEIVER INCLUDED): This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver included in the kit. The laser uses bright Osram’s green laser unit that has higher stability.

🌞LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.

🌞TRIPLE POWER METHODS & TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

【High-Performance Laser】Exterior working range can be up to 700M in diameter with a detector, accuracy of +/- 1/8" at 100Ft. The red beam has strong stability, low power consumption, and high-cost performance. The red beam is more suitable for indoor use. The scanning speed can be adjusted at 0→300→600rpm, and the angle of scanning will continuously change as follows:0°→10°-→45°-→90°→180°-→0°.

【Automatic Alignment】 Electronic Horizontal self-leveling makes this rotary laser self-level up to 5° within 15s. If the RL300HR gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 arc seconds. Slight movements can be ignored in windy or other vibrating conditions while turning on vibrate mode. In vibrate mode, the self-leveling function is deactivated and the cross is locked to use the device at any angle.

【Dual Slope Function】Electronic dual-slope function allows the user to perform a slope of 5 degrees in both X and Y axis. The slope of the Y-axis and the Slope of both X&Y-axis can be set by the remote control. This dual-slope mode works perfectly when checking grade, setting drainage, landscaping-terracing, or other slope work. This is a great laser tool for any job from DIY to large commercial construction, and everything in between.

🧰【Self-Leveling Alarm】10m remote control, ±3° self-leveling system. The laser level will flash and beep continuously when beyond auto leveling range. in this case you need to make it level manually.You can check the level bubble to see this.Wall sticker 360° no dead angle. 360°manually smooth rotary base makes it easier to adjust the laser lines positions. With fine tuning knobs for laser fine adjustment so you can work with precision.

🧰【4D 360° Laser 16 Lines】 Two 360° horizontal and two 360° vertical lines provide all-around leveling coverage in floor, wall, ceiling all around the room. 4D 16 line laser fine positioning, 4/8/12/16 line can be adjustable.The 4D Laser Level provides all-around leveling coverage with an accuracy of ± 1/10 in at 32ft and a maximum working range of 30 feet indoor, enable you to work in different parts of a large room.

🧰【Power Saving】 High brightness green beam is visible in the sun which is brighter than standard red beams. The service time can be extended to nearly 8 hours with rechargeable battery (charger is included).Rechargeable lithium battery can work over 5 hours with all beam lines on. Rechargeable battery is more cost-effective than AA batteries.

VISIBILITY: Features Bosch’s Visimax technology to deliver maximum line laser visibility up to 65 ft. in standard working conditions

360 DEGREE: Provides four-mode functionality, including single vertical, single horizontal, horizontal vertical combination and lock manual modes. The 360 degree coverage gives the user one setup point for an entire room

SELF-LEVELING: Includes Smart Pendulum System that allows laser tool to self-level while also indicating out-of-level condition to help ensure an accurate measuring

DEWALT laser level has green beam for enhanced visibility and range

Laser level tool comes with cross Line and 100 ft. LDM

Self leveling laser level has full Time pulse mode for use with a detector (DW088CG)

Special reflective target film increases visibility of a red laser line or point when working over long distance or bright sunlight conditions.

"L" base to keep upright and steady on floor, lightweight and easy to use.

Magnetic base easily adheres to ceiling grid or steel studs for hands free use.

Horizontal self-leveling automatically aligns the DEWALT laser level to center

The laser levels for construction are equipped with leveling vial for manual leveling in vertical mode

Protected rotary head and weatherproof design of the level laser deliver interior and exterior jobsite durability

Laser Class Ⅱ <5mW

【100FT Green Cross Line Laser Level】Motovera 100ft self leveling laser level LL-T2 will project a 110° horizontal line and a 110° vertical line when working, and equipped with a soft grip, light weight and palm-sized design, easy to carry and drop resistant grinding, IP54 dust and water resistant. Safety Class II, <5mW Power Output, Horizontal Accuracy ±3mm at 10m (± 1/8In. at 33 Ft).

【4 Gears Brightness Adjustble】 Under the power saving mode, you can adjust different green light brightness according to different usage environments to work better with you. Under the same environmental brightness, the green laser horizontal line is 4 times that of the red beam, and the indoor working distance can reach 100 feet, and it can also be used outdoors.

Battery Not Included

ACCURATE READINGS: Accurate within 1/8 in. at 30 ft. to achieve plum lines

PRECISE POSITIONING: Fine adjustment knob

4 X 360° GREEN 16 LASER LINES: Our Self-Leveling Laser Level have 2 horizontal 360° plane, two vertical 360° planes, 16 laser lines, which can cover the floor, walls and ceiling all around the room. Horizontal lines and vertical lines cross at 90° angles help you to visualize quickly and finish square layout. The portable size makes it more comfortable and convenient to use, even for small handmade project.Laser class: Class II

SELF-LEVELING & MANUAL MODE: ❶This 4D laser level can be tilted self-leveling within ± 3°, and the alarm will be activated until we put it in a level place. Just to switch the Power ON / OFF button to the ON side to turn on the self-leveling mode. ❷Press the "OD" button on the top to turn on the manual mode and project lines in any position or angle. It's perfect for installing lighting fixtures, hanging pictures, wall tiling or floor tiling, etc.❸Remote Control.

MULTIPLE INSTALLATION METHODS &PRECISE POSITIONING:The horizontal/vertical accuracy of the laser line is ± 1mm / 7 m.❶The Upgrade Iron Plates Of Bracket Back Has Strong Suction, Which Made More Steady While It Mounted On The Iron Pole. Come With Iron Plate, Use With The Bracket That Made More Steady And Level. ❷Lifting Platform Suitable For Measuring Low Wall.❸Also The Laser Level Could With 1/4" Tripod To Use It.You can rotate the laser level 360 degrees, project lines in any position or angle.

⚠【HUEPAR DEDICATED RECEIVER】- Huepar LR-5RG receiver can ONLY be used with Huepar Line Laser Levels that have Pulse Mode Function‼ Please note the the receiver can NOT be used with Rotary Laser Level‼ And the receiver can NOT be used with Huepr 9011G&9211G laser level‼ It is recommended to use the detector in accompany with Huepar 901CG/902CG, BOX-1G/R, 8211G, 621CG/R, 622CG/R, 602CG/R, 603CG/R, GF360G/R, etc. Can also be used with Tacklife SC-L03 / SC-L04 Laser Level.

⚠【AVAILABLE FOR RED AND GREEN PULSE LASER】- It is NECESSARY to Turn ON the Pulse Mode of the Laser Level when using with Huepar LR-5RG laser receiver‼ The receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200 feet.

⭐【Large Reception Window & Dual LCD Display】- Large reception window of 2 inches and optical and acoustic signals help to locate the laser plane quickly and accurately. Dual LCD displays for easy visual readout on both sides of the receiver. LCD backlight provides a clear look even in low light conditions. Adjust the height until the horizontal datum line and the arrow disappear on the LCD display.

✔️MOUNTING CLAMP: Huepar LP36M-S Mounting Clamp is designed especially for Laser Mounting Pole LP36.With a 3.5cm / 1.28inch diameter slot for easy mounting on poles. The clamp is equipped with an easy-to-use pressure lever, securely locking the pole in place to ensure stability and accuracy. Install several laser levels at different heights on the support bar, suitable for multiple people working at the same time, such as installing ceilings, windows and wall skirts at the same time.

✔️MULTIPLE INSTALLATION METHODS: Removable back clip and the strong magnets, the bracket can be attached to metal surfaces. Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer. 5/8"-11 female thread makes it possible to be attached to a tripod or laser pole. Fix the bracket to the ceiling by two screws on the top of the bracket. Huepar LP36-M Positioning Bracket is ideal for any job site.

✔️360°ADJUSTABLE BRACKET: The bracket can be placed at any height of the rod according to your needs. With a Height Fine-tuning knob, help to adjust the height within 7cm / 2.76inch, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down.