Best Insinkerator Sink Installation Parts in 2026

DIMENSIONS: 27-1/2" x 13-1/2" x 1-1/4"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

Stainless steel face and plastic body prevent rust.

Size: 1.77'' width x 0.75'' long nipple. Please kindly check its size before buying.

Thickness of sink should be LESS than 0.4 inch. (This is NOT long enough for granite counter tops.)

Universal accessory

Fits most double bowl sinks w/ rear drains

PVC feet elevate grid from surface

DURABLE CONSTRUCTION: Bottom sink grid is made from premium stainless steel material

HEAVY DUTY: Extra thick construction, sturdy wire frame, and rubber feet ensure protection against scratches

SCRATCH-FREE: Vinyl feet and side bumpers protect sink from scratches

Leak-proof cover: the hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

Easy to install: longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

Stainless steel material: filled the hole in the granite, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures, not a heavy metal but it works as

Material: our sink faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime.

Advantages: quick and easy installation without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak. Simple and generous design, make your kitchen look beautiful.

Size: our faucet hole cover is the standard size for most homes; This is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (This is not long enough for granite counter tops), please check the size before purchase.

IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.

Grid dimension: 29-5/8" X 14-7/8" for your sink bottom with Corner Radius 2"

Center Drain LOCATION

FITS STANDARD SIZES SINK: This BEHOK sink grid length 28-3/8", width 15-3/8", height 1", with rear drain corner diameter 5" for bottom of sink, fit sinks corner radius R1-1/2". Please notice your sink's size and drain location. (Note: Please measure the inner dimension of your sink. It's VERY IMPORTANT to measure the dimension of your sink bottom at 1 inch height, DON'T from the sink bottom directly.)

MULTI FUNCTION: This BEHOK sink grid can use on many purposes. You can use it as a drain rack, cooling rack, defrosting grid, drying grid, dishware drainer, etc.

HIGH-QUALITY STAINLESS STEEL: Made of food-grade 304 stainless steel, allowing direct contact with food. It’s durable, corrosion-resistant and rust-resistant. Attractive, stainless steel finish gives bottom grid a pristine look that complements all sink materials.

☑【RINSE RESIDUE QUICKLY】:The bottle washer features 9 high-pressure powerful water jets to thoroughly rinse residue in seconds. Gently press, clean as new! The sloped design of the cup washer base directs water to the kitchen sink, preventing standing water.

☑【WIDE APPLICATION】:The faucet glass rinser conveniently rinses virtually any drinkware that opening size is between 0.6 to 4.2 Inches in diameter. Such as wine glasses, champagne glass, baby bottles, travel cups, coffee mugs, latte cups, sports bottles,etc. Great for home kitchen, bar, cafe, resturant, hotel sink.

☑【DIY REPLACEMENT FOR】:The cup washer for sink is the simple DIY replacement parts for a soap dispenser, kitchen sprayer or sink hole cover. If there is no hole in your countertop, please make sure the mounting holes are in the correct position before installation (please refer to picture 7 for installation requirements).

Overall 9.625" X 13.125" X 0.625"

T-304 stainless steel

Includes plastic feet to protect sink surfaces

DIMENSIONS: 26-3/4" x 16-9/16" x 1-3/8"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

Stainless steel: this faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime

Easy to install: just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak

For use in: faucet hole cover is standard size for most households; Please check its size before purchasing, this suitable for hole size between 1.1 to 1.7 inch, thickness of sink should be less than 0.25 inch

Kitchen Sink Bottom Grid Dimension: 26 x 14 Inches.

Sink Protector: Soft Protective Bumpers Prevent Sink Surface Scratch.

Sink Rack for Bottom of Grid: Durable Stainless Steel Construction with Flawless Chrome-plated Finish.

Air gap cap with flange and plastic body included

1-3/4 in. cap diameter

2-3/4 in. cap height

MATERIAL - The kitchen faucet hole cover is made of stainless steel and ABS,which is durable

LEAK PROOF COVER - The sink hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

EASY TO INSTALL - Longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

[High Quality]- AA Faucet high quality bar sink drain made from stainless steel construction which is built to last for commercial usage.

[Perfect For Bar Sink]- 3-¼” Pipe Length. Perfect for bar and prep sinks for preventing unwanted debris and foreign objects from slipping down the drain.

[Thread Size]- 1” Nominal Pipe Size (ID) Inner Diameter, 1” NPS Thread.

Simple DIY replacement for a sink sprayer, soap dispenser or sink hole cover

Can rinse most standard drinkware including wine glasses, baby bottles, and travel cups

Minimum drinkware opening size is 1 in. in diameter and maximum drinkware opening size is 3.6 in. in diameter

Material - The faucet hole cover is made of durable stainless steel face and plastic system to prevent rusting and will not fade for long term use.

Easy to Use - Just put the cover across the faucet hole and go under the sink to tighten the bottom screw, easy to install the faucet hole cover without any tools. It covers the water spray hole without tools and comes with a rubber gasket for a good seal that won't leak; a simple and generous design that makes your kitchen more beautiful.

Faucet Plug Size- 2 x 0.4inch; Screw Size (DxL): 0.5 X 2.28inch. The faucet hole cover is a standard size for most homes. Please check the size before you buy.

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion

PROTECTS SINK BOTTOM: Specially designed feet protect sink bottom to keep it looking great

Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。

Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying.

Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage.

Sink Protector Grid with Size 14 15/16" X 13".

Stainless Steel Sink Grid with Center Drain Hole Design.

Sink Grid with Protective Rubber Feet and Bumpers to Protect the Sink Surface from Scratching.

【 Easier Installation Ever, NO Drilling 】 Easy and Quick Sink Installation or Repair, No TOOLS or DRILLING, use epoxy or 100% silicone or liquid nail adhesive

【 Full Adjustment After Installation 】 Sink Clips can be easily adjusted to perfect positions after installing a undermounted ceramic bathroom sink or stainless kitchen sink

【 Durable Steel Sturdy Construction 】 Zinc plated steel, 8-10 undermount sink installation kit support sinks weighted to maximum 320 lbs

✅ HIGH-QUALITY 2PCS SET SINK GRID PROTECTOR - Ever wished for a rust-proof sink grid? Luckily for you, our 2pcs set of bottom grids is made with solid stainless steel that prevents rust and corrosion and can stand up to lots of heavy use, featuring a center hole for drain access.

✅ PERFECTLY FITS STANDARD SINK SIZES - Thanks to their regular size (13-⅝” x 11-⅝”) the kitchen sink bottom grids conveniently fit standard sink sizes with ease. So, you can now protect the bottom of your kitchen sinks using these grids.

✅ EFFORTLESS CLEANING AND INSTALLATION - There is no need for tools or making any holes because there is no assemble required. Flexible and effortless to clean.

UNIVERSAL DESIGN SINK CLIPS: Ensure the rim of your sink is tightly sealed against your kitchen or bathroom counter

VERSATILE COMPATIBILITY: Universal design clips are made for use with Elkay sinks and other sinks

DURABLE STAINLESS STEEL: Stainless steel construction provides long-lasting durability that is built to last

Spare Feet for Ruvati stainless steel sink bottom rinse grids.

Set comes with 4 feet.

Grey colored.

✔ HIGH QUALITY MATERIAL - The sink tap hole cover is made of durable stainless steel and plastic, so please don't worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time.

✔ SUITABLE FOR HOLES IN 1-1.6 INCH - The sink tap hole cover is the standard size for most households; Suitable for hole sizes between 1 to 1.5 inches, the thickness of the sink should be less than 0.25 inch (for the small one) and 0.4inch (for the large one) please check the size before purchase.

✔ VERY EASY TO INSTALL - Quick and easy to install without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, comes with a rubber gasket for a good sealing, doesn't leak.

Stainless finish coordinates with today's popular kitchen appliances and accessories

Fits bowl sizes: 21 x 16 center drain

stainless finish coordinates with today's popular kitchen appliances and accessories

Adjust 15x13 Stainless Steel Sink Rack - measure 1" from the bottom of your sink and check the corner radius (0.98"). The length and width should be 1/2" less than your sink.

Chrome-Plated Kitchen Sink Bottom Grid - These kitchen sink accessories with protective pads are corrosion-resistant and rust-proof. Leave damages no chances!

Thoughtful Design - bottom grid for kitchen sink can protect it from scratches and dents. This sink protector helps to speed up water drainage and retain large food residues when washing.

Material:Our sink tap hole cover are made of stainless steel and PP, very durable.

For use in: sink, soap liquid cover, decorative cover, washbasin.

Easy to install:just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak.

DIMENSIONS: 14-1/4" x 14-1/4" x 1-1/8"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.