Best Ds18 Subwoofer Amplifiers in 2026

2.1CH Bluetooth 5.0 Power Amplifier: Exquisite design, improved operation, great sound performance.

BT30D supporting Bluetooth and RCA input can drive most home passive speakers, passive/powered subwoofer. SUB volume/Frequency, Bass/Treble control ensure Hi-Fi music quality.

BT30D wireless stereo amplifier adopts 2 pcs Texas Instruments TPA3116D2 chip. The TPA3116D2 are stereo efficient and digital amplifier power stage for driving speakers, with advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences. High-performance effectively improve output power and audio quality. Max power output up to 200Watt.

The Punch P1000X5 is an ultra-efficient 5-channel amplifier (2.38” x 7.76” x 15.03”) capable of running your entire system without excessive drain on your charging system and rocking 1000 watts of RMS power

Perfect for running a front/rear system and a dedicated subwoofer (RMS Power Output: 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm OR 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm OR N/A + 500 Watts @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter and tri-stage protection that covers thermal, over-current and short circuits

Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

Competition Grade Class D MOSFET Power Amplifier

Peak Power at 1 Ohm: 5, 400 Watts | RMS Power at 1 Ohm: 3, 500 Watts

Stable at 1 ohm | Remote Subwoofer Level Control Included

The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.

The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.

The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.

550 W MAX Power @ 2 Ohm x 2 Channels

250 W MAX Power @ 4 Ohm x 2 Channels

1000 W MAX Bridged Power @ 4 Ohm x 1 Channels

Use classic TAS5548 + TAS5624 power amplifier chip,Max output power is 150W+150W, load 4Ohm speaker, Let you enjoy Stereo Hi-Fi Music

Bluetooth uses QCC3034 chip, version 5.0, supports ACC SBC APT-X and APT-X LL APTX-HD lossless transmission, low frequency output is specially designed to connect active subwoofer, it is very easy to build a 2.1 channel system

Bluetooth, PC-USB, Optical, Coaxial, RCA Audio input,Multiple input options to meet your different needs,Perfectly compatible with most home audio equipment, such as mobile phones, computers, tablets, TVs, TVs, MP3, CD players, etc

5.1 CHANNEL: The 5.1 genuine channel home theater audio amplifier bluetooth receiver amp gives you 35W*2+20W+15W*2 RMS at 4/8/16 Ohm impedance to enjoy high-quality audio amplification. Perfect for karaoke, home theater, and acoustic sound system

MULTIPLE CONNECTIVITY: This amplifier is equipped w/ SD memory card & USB flash drive readers, 2 1/4" input jacks (Mic1, Mic2), 2 AUX input jacks, 1 line output, 1 subwoofer signal output, and comes with an FM radio antenna to improve FM sensitivity

BLUETOOTH COMPATIBLE: Pyle stereo receivers home theater bluetooth amplifier are compatible with bluetooth w/ 40 ft wireless range and works w/ all of today’s latest devices like iPhone, android, smartphone, iPad, tablet, etc. w/ hassle-free pairing

[Upgrade!!! Newest version optimize the Bluetooth range and stability as well as sound quality] Using classic TDA7498E chip, max output power can reach 160W + 160W, equipped with high-quality 32V/5A power supply enough to drive above 300W passive speakers. It has a good match with outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers.

M1 PRO supports stereo RCA and Bluetooth 5.0 input, compatible with phones, computers, TVs, MP3 players, TV, Echo Dot, CD players etc. It is also a digital music player with U-disk input supporting MP3, WAV, APE, FLAC and WMA lossless formats.

Can build 2.1-CH audio system with its low frequency output for active subwoofer. The bass effects can be strongly enhanced. The sound is more delicate with treble and bass control, the shocking auditory effects make you feel like in the cinema.

Bluetooth 5.0 & Stereo RCA & MM Phono inputs: MM phono input, converts phono signal to line level signal and amplify it, with low-noise integrated circuits and high-quality components to ensure clear and clean sound. 3.5mm AUX input, amplify the low level audio signal from your phone, tablet, MP3 etc. and provide enough output power for passive speaker, greatly improve the sound quality.

JAN5654 vacuum tube & HiFi Sound: default with JAN5654 tubes, improves everything associated with your music such as detail, transparency, immediacy, richness, dynamic, tone etc., much better than 6J1 series especially in human voice. Pluggable tube socket for tube rolling and sound-shaping, easy to pick from and alter the sound signature to one's preference.

Super large output power & low frequency output: adopting TDA7498E amp IC whose max output power can reach 160W+160W(4Ω), and equipped with 32V/5A power supply, easily to drive most home passive speakers. And adding subwoofer output, convenient to connect active subwoofer and build 2.1 stereo audio system.

HUGE POWER IN A SMALL PACKAGE - 3,000 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.

WIDE RANGE OF APPLICATIONS - Ranging from 1-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.

BASS KNOB INCLUDED - The Candy XXL1B amplifier comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you're listening to.

500 W MAX Power @ 2 Ohm x 2 Channels

250 W MAX Power @ 4 Ohm x 2 Channels

1000 W MAX Bridged Power @ 4 Ohm x 1 Channels

【Please Note】We recommend you to use 3.7V lithium battery as power supply to reduce signal interference and noise (The lithium battery should have charging protection!). Do not use dry batteries, power bank, multi-function transformers and other unstable power supply. Do not get close to metal parts because metal parts will interfere the module.

【Updated BT 5.0】Mini ḅḷụẹ-ṭọọṭḥ audio board updates to ḅḷụẹ-ṭọọṭḥ 5.0 version, which is compatible with most mobile phones and ḅḷụẹ-ṭọọṭḥ adapters. The maximum transmission distance is about 15 meters.

【Good Sound】(Speakers are not included.) It outputs 5W+5W dual channel stereo audio. Updated version supports anti cracking sound function and subwoofer enhancement. It also supports USB sound card, without drive. Just plug and play. 2-8 ohm and 3-10W speakers are compatible with the board, but 3 ohm&5W or 4 ohm&10W are recommended.

Strong output power and low frequency output: T9 Bluetooth Amp Each channel can output 100W(4Ω), match perfectly and easily to drive all 3-8Ω passive speakers, adds a low frequency output easy to connect active subwoofer and build 2.1 channel system, the bass effects is greatly enhanced

AIYIMA T9 Class D Power Amplifier With multiple digital audio inputs: Bluetooth 5.0 / USB / Coaxial / Optical / stereo RCA, compatible with most audio device such as phones, computers, tablets, TVs, TV, CD players etc. The perfect combination of DAC and amplifier, very suitale for audiophiles who have various audio devices

Unique and Amazing Combination: this T9 home stereo amplifier with VU meter into whole in such a mini size, when enjoy HiFi music, the pointer dancing in the warm light with strong vintage feelings, dynamically decorates the audio system space

Car Audio Signal Hi-Low Converter:It converters car stereo's high audio signal to low RCA signal.

Amplifier Modify Accessory:This adapter is suitable for car stereos without RCA output to connect with the after-market amplifier. Although some amp has Hi-Low Convert function, we strongly recommend to have such an external converter to avoid the interference of the conversion inside the amp. Especially useful for CD radio stereo without Line Out port.

Easy to install: White wire connect to the Left channel positive. Black/White wire connect to the Left channel negative. Gray/White wire connect to the Right channel positive. Gray/Black wire connect to the Right channel negative. Black wire connect to Ground. Red wire connect to the 12V battery positive. Blue wire connect to Control line REM.

PLEASE NOTE: Its Recommended Grounding To The Frame of The Vehicle.

RMS Power Rating (4 ohms): 770 watts x 1 channel. - RMS Power Rating (2 ohms): 1300 watts x 1 channel.

RMS Power Rating (1 ohm): 1944 watts x 1 channel.

2.0 Channel Amplifier Home Audio: The dual channel bluetooth stereo amplifier receiver can accommodate 2 sets of speakers, with its own ETL certified power supply driving 80W x 2 power, providing you with enough power to enjoy high-quality amplified audio. The amp is not compatible with Cars with 24V power supply.

Wireless Bluetooth 5.1 Stereo Power Amplifier: Bluetooth amplifier has the advantages of high speed and stable transmission, low power consumption, long transmission distance, automated reconnection to the last connected device, no popping sound and noise; it is suitable for the latest device, including smart phone, laptop, tablet, computer

Headphone Jack Output: 125mW X 2(32 ohms, 20 Hz - 20 KHz, 0.001% THD), direct coupling circuit, eliminates DC blocking capacitors, directly drives impedance 16Ω - 200Ω headphones, audio signal output without loss, anti-interference function makes the sound pure and clear

Mini Elegant Size But Powerful: ① NS-20G mini compact size suits very well for home and desktop use, and the output power is improved to 200W (100W*2) with 2PCS TPA3116 chip; ② You will be amazed by its output power compared to its size when you see it.

HiFi Sound and Bluetooth Lossless Transmission: ① HiFi clear and clarity sound, no audible noise; ② Bluetooth 5.0+EDR+DSP (Digital Signal Processing) to achieve real wireless lossless signal transmission and enjoy much better Hi-Fi sound quality within 15M distance, which brings you high-grade listening feast without any background noise.

NS-20G can be used as headphone amplifier(Only support 15-32Ω headphones). Bluetooth and AUX input can be widely applied to All Your Favorite Devices. Suits 5-8 inches / 4-8Ω / 20-120W speakers

【RMS 4x40W + Active Subwoofer】-- It offers you the peak power output of 800W in total which lets you drive 2 pairs of high capacity speakers (Recommend to connect speakers with rated power less than or equal to 40W) and an active subwoofer. (💡💡For this S-299 amplifier subwoofer output, you have to connect with active subwoofer. A passive subwoofer is not acceptable for this amplifier.)

【Hi-Fi Sound BUT NOT STEREO】-- It has a high capacity transformer that gives you clear sound without any distortion. It has a harmonic distortion less than or equal to 0.04% this helps you listen crystal clear and sharp music. (💡💡NOT surround stereo sound, perfect for listening to music. Not recommended for stereo gaming.)

【Multiple Connectivity】-- Latest Bluetooth 5.0 version that gives you a large operating range of 30ft. You can connect it with your music streaming devices like pc/mobile/laptop either with Bluetooth connection, 3.5mm AUX Cable or Headphone Jack. It also supports USB Port, SD/TF Card port. (NOTE: Please keep the distance within 30ft / 10m between the device and amplifier without any wall blocking. But if you are connecting with PC devices, please keep the distance within 15ft / 5m.)

WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions

POWERFUL 1200 WATT: This amplifier receiver is powerful with its 1200 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control

4 CHANNEL AMPLIFIER: Pyle’s PLMTR4A is engineered as a 4-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input

power amplifier, lepy power amplifier with high fidelity and high efficiency, high power amplifier, subwoofer compensation for public advertising, sofa background, massage chairs, furniture installation, modification, desktop computer and so on use value.

Recommend the use of 12V5A DC power supply with the packing size: 4.6*10.5*15cm

lightweight, has a matt silver casing and allows for full control of your volume, treble and bass output. It also has a jack for plugging your MP3, MP4,for iPod or CD player

Competition Grade Class D Monoblock Amplifier

Peak Power at 1 Ohm: 11,000 Watts | RMS Power at: 5,480 Watts.

Stable at 1 Ohm, Frequency Response: 15 Hz to 250 Hz

Audiophile Class D mini amplifier from Orb Audio – 25 CLEAN watts per channel into 8 Ohms. Plenty of power for any bookshelf or floor-standing speakers.

The smart features you want – optical input, 2 X 3.5mm stereo analog inputs, subwoofer pre-out, dialogue boost and 5V USB slot - power only

Compact design (5” wide, 3.5” deep and 1.5” tall) – anodized, brushed satin, aluminum, cabinet - looks sleek from any angle or hides easily.

ENJOY MOVIES & LAG-FREE GAMING IN LATEST 8K UHD VIDEOS - With masterful 8K HDMI upscaling, advanced technologies like HDR10, HDR10+, Dynamic HDR, QMS, VRR & ALLM, this 9.2 channel (125W x 9) amp delivers extraordinary visuals for a cinematic experience

IMMERSIVE SURROUND SOUND WITH HEIGHTENED REALISM - Supports Dolby Atmos, Dolby Atmos Height Virtualization, DTS:X & DTS Virtual:X. Enjoy virtual sound effects without installing in-ceiling or upward firing speakers in a humble 2.1, 5.1 or 7.1 speaker setup

PREMIUM CONTENT DIGITALLY REMASTERED – Feel the difference in picture quality & clarity with IMAX ENHANCED and get fully encapsulated in life-like overhead sound with ground-breaking Auro-Matic algorithm that converts LEGACY CONTENT INTO AURO-3D FORMAT

HIGH PERFORMANCE CAR AUDIO AMPLIFIER | The best competition amplifiers for cars in the market! This 12v car amplifier features: 2000 Watts x 1 RMS @ 1 Ohm / 4000 Watts MAX, Freq: 10Hz - 220Hz, 0~12dB, Built-In OEM Line Converter, High Power in Extremely Small Heat Sink, Bass Boost 0~12dB, and Ground Loop Isolator. Our monoblock amplifier for car provides real punch for your car stereos and car subwoofers!

PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding and underpowered car subwoofer amplifier. Your car amplifier package and car subwoofer set aren't complete without our monoblock Massive amplifier. Our car audio subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. DC 5V - 15V Operating Voltage.

QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS FULL POWER | Hits its full power all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. It works great and provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry.

Powerful, rock-the-boat sound! 1600 watts of class D output run the speakers and sub off of One powerful amp

5-Channel, 1600 Watt, class D amplifier and frequency response is 10Hz - 50kHz

Can amplify up to 4 pairs on Fusion speakers (speakers run in parallel on channels) and the ms-sw10 Fusion subwoofer

Latest Bluetooth Technology: B50 adapts aptx HD technology with Qualcomm Bluetooth chip, which supports Bluetooth 5.2 wireless HD audio transmission and reception with 2 Bluetooth devices at the same time. Decoding up to 48Khz/24bits with Bluetooth.

Long Range & Stable Transmission: High-end Bluetooth module and precision-tuned antenna ensure Bluetooth coverage and latency. Support APTX HD, APTX LL, APTX Adaptive audio formats over connection range up to 50 feet, stable connection for both reception and transmission. Enjoy HD Music on your headphone with no popping and audible noise. *The Bluetooth transmission distance may vary on different Bluetooth devices that you connected with.

Powerful Amplifier: The Arylic B50 is a 50W x 2 4ohm powerful amplifier for your passive speakers, bookshelf speakers and mobile devices. Enhances your entertainment system. Delivering low distortion and acoustically accurate audio reproduction, you'll enjoy clear, high-quality amplified audio. Compact integrated Class D digital power amplifier with Bluetooth wireless music streaming.

Class-D Mono-block Subwoofer Amplifier, 1200 Watts Max Power, RMS 600 Watts x 1@2Ohm; RMS 350 Watts x 1@4Ohm.

Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.

Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.

KXM Series 1200 Watt Marine Subwoofer Amplifier

Continuous RMS Power [watts/channel] @ 14.4V, 2-Ohm mono

24dB/octave, variable 40-160Hz, low pass only;