Best Standard Motor Products Switches in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Feature: The waterproof toggle switch is made of metal and bakelite. The shaft and bracket are both made of Brass Material. Switch with M12X0.75 weatherproof Boot Cap Cover, can effectively protect the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: Waterproof toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC.

Installation: Mounting hole size is 0.48 inches (12.2MM). Each of the terminals has a machine screw for quick connections, The thickness of Terminals is 0.8mm.

Features: Waterproof 12VDC lighted rocker switch is a miniature rocker switch. Available colors of button: black/blue. "O I" marked on the button.

Materials: Round Waterproof 12V DC illuminated rocker switch is made of nylon 66 and IP65 material. The terminal is made of brass, silver plated.

Function: Waterproof 12 volt marine rocker switch has 3 pins (easy to turn ON/OFF), and SPST (single pole single throw) design with a set of jumpers. The rating is 20A 12VDC.

Dual LED Marine Switch: The marine switch of the 6 gang rocker switch panel is dual led marine switch design, choose lower led always on can help you easily locate the switches in dark.

Cigarette Lighter Socket: The cigarette lighter socket of the toggle boat switch panel fits for all 12v to 24v accessory plug, and can be used with latest car chargers to quick charge latest model phones.

Dual USB Port Socket: The marine rocker switch panel waterproof contains a 5V 2.1A and 5V 1A dual usb port socket, which enables a wider charging range of electronic equipment.

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Feature: SPST 5 PIN ON OFF rocker toggle switch (Single Pole Single Throw) with 12V - 24V BLUE LED Light. IP66 Waterproof Rocker Switch with 20A 12VDC Rating.

The 12V Rocker Switch with dual LEDs, the lower light is constantly illuminated when the switch is connected to the battery(clearly see the switch in the dark). Both lights are illuminated when the switch Powered ON.

The Boat Marine Rocker Switch with 1.46 * 0.83 Inch Panel Mounting Hole Size, It's sturdy and durable and easy to install or replace.

Feature: The SPST toggle switch waterproof is made of metal and bakelite Material. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: This toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC, Heavy Duty Version.

Installation: Mounting hole size is 0.48 inches (12.2MM), with #250 Spade Terminals(6.35X0.8mm) for quick connection.

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

【30A Rocker Switch】 It's a Large Current Heavy Duty Rocker Switch, the Switch Rating is 30A 250VAC. So the switch can be used well on 3A, 6A, 10A, 15A, 16A, 20A, 25A, 30A at 120 Volt or 240 Volt.

【Red 120V Rocker Switch】 This lighted Rocker Switch with Red Lamp, The input voltage for the lamp of switch should be AC 110V to 250V. The Switch Lamp will light up to indicate the operating status of the device when the switch is turned ON.

【ON OFF DPST Switch】 It's a DPST 4 Pin ON OFF Rocker Switch, Double Pole Single Throw design, and T125 Temperature Degree(-25C to +125C).

【Red LED lighted Rocker Switch】 This Round Rocker Switch with 12VDC Red LED, The Switch LED will light up to indicate the operating status of the device when the switch is turned ON.

【Waterproof Rocker Switch】 The Small switch with a rubber covered the switch actuator to against dust, Oil and Water, IP65 degree.

【ON OFF Switch】 It's a SPST 3 Pin ON OFF Rocker Switch, Single Pole Single Throw design, with 20A 12V DC Switch Rating.

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Black Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Feature: Automotive toggle switch is made of metal .The handle is chrome plated.Delicate appearance with strong Construction.The rating is 50A 12VDC.

Function: Automotive toggle switch with 2 pins, SPST design (single pole single throw), designed with rocker style, easy to turn ON/ OFF.

Size: Mounting hole size is 0.472 inches (12MM).Each of the terminals has a machine screw for quick connections, but also easy to be soldered.

1.Type: 12v On/off Illuminated toggle switch. The required mounting hole diameter of this lighted toggle switch is 16mm.

2.Performance: This lighted toggle switch contains a 12-24V RGB (Red, Green, Blue) triple LED. Comparing with the previous LED toggle switch, this upgraded version enables a higher level of customized light styles. For example, you can choose one of colors such as red to light up when switches off; and when switch on, the red color can switch to another color such as blue.

3.Switch Rating: 20A 12VDC. Packed with 3 sets of Wires and Cable Ties. The length of the wires(including cable ties) with the illuminated toggle switch is about 15.8cm(6.22 inches).

Feature: 50 Amp 12VDC toggle switch is made of metal. The handle is chrome plated. Delicate appearance with strong Construction. The rating is 50A 12VDC.

Function: 50A 12V DC toggle switch with 3 pin, SPDT design (single pole double throw), designed with rocker style, easy to turn ON/ OFF/ON.

Size: Mounting hole size is 0.48 inches(12MM). Each of the terminals has a machine screw for quick connections, but also easy to be soldered.

【Feature】- Blue LED lighted round toggle switch, SPST 3 pin 2 way rocker switch design. The illuminated design led rocker switch help you easily locate and identify the status of the switch.

【Rating & Mounting】- The rating of this lighted round rocker switch is 12V 20A heavy duty design. The mounting hole size for this 12v rocker switch is 20MM (about 0.79").

【Easy Installation】- This round led rocker switch is snap-in mounting design, which is easy to install and remove, makes the replacement of the switch easier for you.