Best Standard Motor Products Switches in 2026

★ Rocker/Toggle Switch parameters: Current rating: 12 Volt 20Amp DC & 24 Volt 10Amp DC; Pump type: ON-OFF Switch/Toggle; IP67 Waterproof; Material: ABS and anti-retardant materials for the Environment; Blue lights; Terminal type: SPST (Single Pole Single Throw); Operation Temperature -45℉+175℉; More Than 100000 Hours Life.

★ Wide range of application: 100% Waterproof Dust-tight Shockproof and Debris-proof Design, High Intensity IP67 Waterproof Rocker Switch Toggle. Universal for all cars, RVs, SUV, ATV, UTV, Cans, Motorcycles, buses, marine boats, yachts, trailers, jeeps, prerunners, camper, caravans, engineering vehicles, special vehicle etc; anywhere you can imagine.

★ Compatible: Standard 5 Pin switch, rated at 12v 20Amp and 24v 10Amp, available for most electrical equipment, mounting hole size available for most vehicles.

[High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.

[Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full).

[Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.

Mounting Hole Size: Φ16mm (5/8 Inch), Switch Combination : 1NO1NC.

Operation Type : Latching/ Self-Locking [Push it - ON, push it again - OFF].

Ring LED can be on all the time or only when switch is on which depends on how you wire it.

★ Rocker/Toggle Switch parameters: Current rating: 12 Volt 20Amp DC & 24 Volt 10Amp DC; Pump type: ON-OFF-ON Switch/Toggle; IP67 Waterproof; Material: ABS and anti-retardant materials for the Environment; Blue lights; Terminal type: DPDT(Double Pole Double Throw); Operation Temperature -45℉+175℉; More Than 50000 Hours Life.

★ Wide range of application: 100% Waterproof Dust-tight Shockproof and Debris-proof Design, High Intensity IP67 Waterproof Rocker Switch Toggle. Universal for all cars, RVs, SUV, ATV, UTV, Cans, Motorcycles, buses, marine boats, yachts, trailers, jeeps, prerunners, camper, caravans, engineering vehicles, special vehicle etc; anywhere you can imagine.

★ Compatible: standard 7 Pin switch, rated at 12v 20Amp and 24v 10Amp, available for upgrading most wiring harness to control Led Light, Led Work Lights, Fog Lamps, Indoor lights, Dome light, Decorate Lights, Headlights, Taillights and Auxiliary Lamps & More.

★ 2 sets 16mm push button Blue LED light switch with IP67 & IK10 Protection, can be used in wet or dusty environment.

★ This on off ac switches come with 5 pins wire terminal with socket plug, don’t need soldering, make your work simple and easy! The LED light can be always on or only on when device working, it depends on how you connect the wire.

★ On/off push button switch type: Momentary push button and Latching push button for your choice. Momentary button switch operation method: press and hold the button –>ON, Release the button –> OFF. Latching button switch operation method: press the button–>ON, press the button again–> OFF.

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

√ Easy to Mount - Wireless remote switch allows you to control any light across the entire house from anywhere. Instantly create a switch at any location without running new wires and tearing walls. Compared with traditional wall light switch, save huge labor and material cost. (3M tape provided for easy installation)

√ Dimmable Switch- Not only a switch but also a dimmer. Long press to circularly dim the brightness to suit any activity. Turn on the light again, and it maintains the last light intensity. No need to pay the extra money to buy a dimmer. NOTE: The switch uses TRIAC components and supports incandescent lamp, tungsten lamp and mostly LED lamp which supports TRIAC dimming function.

√ Strong Signal - The self-powered switch converts finger kinetic energy to electricity and sends wireless 433mhz strong signal to receiver to control turning on/off lights. Indoor 99ft / 30m and Outdoor 525ft / 160m. Go through 2 walls without interference problem.

Latching Type: Push it - ON, push it again – OFF

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36V DC/AC, Switch Contacts: 1NO

Tiny Latching Switch: 1/2" diameter, suitable for tight space application

5 pcs 12mm waterproof switch with IP67 & IK10 Protection: waterproof and rustproof, can be used in wet or dusty environment.

Push button on off switch operation type: Momentary (continuously press the button –>ON, hand away the button –>OFF)

Momentary switches mounting hole: 12mm; Rated current and voltage: 3A / 250VAC.

Shell Material :Stainless Steel ,Mini Small Switch

Latching Type: Push it - ON, push it again – OFF

Mounting Hole Size: Φ12mm, Switch Rating: 3A/250V AC, Switch Contacts: 1NO(Normally Open)

2 pcs MINI latching push button with IP67 & IK10 protection: waterproof and rustproof, can be used in wet or dusty environment. (Warning: This is a MINI button switch; the product size is close to the ring finger or little finger, please double check the size from our photos before you placing order. Thank you!)

On off switch operation type: Latch (press the button –>ON, press the button again–>OFF)

Latching switch mounting hole: 12mm; Rated current and voltage: 3A / 250VAC

Dimmer Connect Way: The dimmer controller is connect with between the power supply and led deck lights. Bring different lighting brightness for your house indoor and outdoor. This kind dimmer just compatible with SMY deck lights only. Don't use for other lights.

Control Distance: The dimmer with RF remote controller can control distance in 8-10meter. Dimming the suitable brightness of your led deck lights, choose the right atmosphere for the right moment.

Waterproof IP67: The controller can installed in outside and gluing treatment of IP67. No worry damaged by raining.

1.Type: 12v On/off Illuminated toggle switch. The required mounting hole diameter of this lighted toggle switch is 16mm.

2.Performance: This lighted toggle switch contains a 12-24V RGB (Red, Green, Blue) triple LED. Comparing with the previous LED toggle switch, this upgraded version enables a higher level of customized light styles. For example, you can choose one of colors such as red to light up when switches off; and when switch on, the red color can switch to another color such as blue.

3.Switch Rating: 20A 12VDC. Packed with 3 sets of Wires and Cable Ties. The length of the wires(including cable ties) with the illuminated toggle switch is about 15.8cm(6.22 inches).

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Mounting hole size:12mm, 4 Copper Pin Switch. Blue LED Light.

Operation type Momentary: Pressing the button ON, Release the button OFF.

Switch rating:2A/36VDC, LED can be ON all the time or only ON when switch is ON, depending on how you wire it.

Latching Type: Push it, ON; Push it again, OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

IP67 Waterproof & IK10 Protection: Rustproof, can be used in wet or dusty environment

Contact Configuration: 1NO+1NC(SPDT); Action Type: Momentary;

Actuator Type : Roller Lever Plunger; Ith: 5A;AC-15: 250VAC 5A; DC-12: 30VDC 5A

Roller Size: 18 x 6.5mm/0.7" x 0.26"(D*T);Installing Hole Size: 5.5mm/0.22"(Dia);Installing Hole Distance : 2.5cm/1"(L*W)(Center to Center)

✅Operation: Push-On, Push again-Off, SPST switch, material: plastic, rubber, metal, switch is durable, waterproof, dustproof, long service life, head protection grade: IP67

✅Working current: 3A; Working voltage: 250V; Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ), working temperature: -40-105℃

✅Rectangular base size: 17 x 14mm (0.67" x 0.56"); Mounting hole size: 10mm (0.393"); Cord length: 12mm (4.5")

Product name: Inline Cord Switch;Action Type: Latching;Our switch has been upgraded to IP67 waterproof level, using professional electronic component sealant, so that the switch can be better used in outdoor rainy conditions.

Product material: Metal,Plastic;Main Color: Black,Red;Contact Type: DPST;Position: 2(ON-OFF);Voltage & Current: AC 16A/250V,20A/125V

Product features: IP67 Waterproof,with red indicator light,high power and high temperature resistance,with screw terminal,easy installation;Suitable for high-power electrical appliances, mechanical equipment, medical electrical lamps etc.

Mounting hole size:12mm, 4 Copper Pin Switch. Blue LED Light.

Operation type Momentary: Pressing the button ON, Release the button OFF.

Switch rating:2A/36VDC, LED can be ON all the time or only ON when switch is ON, depending on how you wire it.

Our Push Button Switch through UL certification and CE certification.

LED voltage: 110V ~120V(AC/DC), Head Shape:High Round Momentary Push Button, Hole size required: 7/8''/22mm. LED Life:40000 hours.

22mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO1NC(SPDT).

Latching switch: Push it, ON; Push it again, OFF. 100% Brand new and high quality, mechanical life for 500,000 cycles. Degree of protection: IP67, IK10

Mounting hole size: 19mm; Head Diameter: 22mm; Head shape: Flat; Enclosure material: Aluminum Alloy

Switch rating: 5A/250V AC, 5A/30V DC; LED rating: 15mA, AC/DC 12V; The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it.

[Working Mode]: Push and Release, button locked, Normally Open Circuit ON. Push and Release again, button recovered, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF Self-Locking. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64")

Item Name: Push Button Switch; Operation Type: Momentary; Contact Type: 1NO

(Rated) Voltage & Current: 250V 2A; Light Voltage: 3-6VAC/DC; Light Color: Red

Mounting Hole Dia: 12mm / 0.47"; Terminals Quantity: 4; Head Shape: Hex Flat Head

Momentary Type: Push and Hold,ON; Release,OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Limit Switches Type: SPDT 3 Pin limit switch, 1 NO 1 NC design, rating: 6A 12V DC or 5A 250V / 120V AC.

Removable Lever: Micro switch with lever design, different from other microswitches, the lever of this microswitch is removable, you can remove or change the lever according to your own needs.

Waterproof: This lever switch is IP67 waterproof design, which makes the micro switch become much safer when be used under different kind of environments.

Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles

This switch is constructed of non-oxidizing, corrosion resistant stainless steel. It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage

The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it

Quality and Durable Material: The switches are made of quality aluminum alloy material, which is corrosion-resistant and durable. The internal contacts adopts quality silver material , flame retardant and safe.

Product Parameters: Operating voltage 440 volts, current rating 10A, contact type 1NO 1NC, push to lock, turn to release. Type of action latching, mount hole diameter 22mm( 7/8").

Smooth Operation: The emergency stop switch features silky smooth operation, with strong bounce it can be easily open and close, it brings you smooth switching experience, and no deformation when pressed.

Our Push Button Switch through UL certification and CE certification.Waterproof IP67 can be used outsides or marine applications such as ships. Stainless steel 304 shell is sturdy and durable.

Rated current 5A 250V, Stainless Steel Ring LED, Hole size required: 7/8''/22mm.,LED light:12V (AC/DC), Mechanical life: 1,000,000 cycles,Electrical life: 100,000 cycles.

22mm Latching Push Button Switch: Latching switch: Push it =ON; Push it again =OFF, Contact Configuration: 1NO1NC(SPDT), 6 pins.