Best Spst Toggle Switches in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Feature: The waterproof toggle switch is made of metal and bakelite. The shaft and bracket are both made of Brass Material. Switch with M12X0.75 weatherproof Boot Cap Cover, can effectively protect the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: Waterproof toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC.

Installation: Mounting hole size is 0.48 inches (12.2MM). Each of the terminals has a machine screw for quick connections, The thickness of Terminals is 0.8mm.

Features: Waterproof 12VDC lighted rocker switch is a miniature rocker switch. Available colors of button: black/blue. "O I" marked on the button.

Materials: Round Waterproof 12V DC illuminated rocker switch is made of nylon 66 and IP65 material. The terminal is made of brass, silver plated.

Function: Waterproof 12 volt marine rocker switch has 3 pins (easy to turn ON/OFF), and SPST (single pole single throw) design with a set of jumpers. The rating is 20A 12VDC.

Use to control lighting with the opening and closing of a door

TOGGLE POSITION: Normally-ON / Momentary-OFF, (SPST) circuitry turns lights on when the door opens

CSA listed

Product name: Waterproof Heavy Duty toggle switch and waterproof cap. (Axes, brackets and terminals are all made of brass), which can make your equipment more high-end and safer.

Product parameters: Mechanical life: more than 100,000 cycles. Electrical life: more than 10,000 cycles. SPST 2 pin ON/0FF; Voltaget: 20A 125VAC; 15A 250V AC, 12 volt DC 30A.

Product size: Mounting hole diameter 12MM /0.48inches; The overall size of the switch is 28.9mmx15mmx53mm/1.1inx0.59inx2.1in. The thickness of the terminal block is 0.9mm.

Feature: The Safety cover toggle switch is 2 Pin SPST(single pole single throw), designed with rocker style, easy to turn ON OFF. The switch rating is 20A 12V DC; 15A 250VAC; 20A 125VAC Heavy Duty.

Material: The safety cover toggle switch is made of Brass Actuator&threaded shaft and bakelite Housing. It's nice looking and Durable.

Red Aircraft Guard Cover prevents accidental start. The toggle switch can be activated only after you flip the switch guard cover. And the switch get OFF automaticly when you close the cover. That can effectively prevent accidental touch on the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

AC cord switch - Suitable for voltage: 0-250V; maximum current: 2A. The dpst control switch is great for office, home, bedroom lighting switch replacement or installs one to an appliance that did not have before.

Safe and reliable - This switch styled in a matt finish and plastic construction, a flame-retardant base, and has brass contacts inside. The shock-absorbing system helps to keep you safe always!

Easy installation - No "fine" aspects of electrical work required at all! Slit the cord and cut apart the smooth wire. Insert the cord into the wire channel and cap the switch with screws.

Brand New APIELE 20 CM Pre-wired Rocker toggle switch; Model: KCD1-8-101NW-Wired-Blue

SPST Switch Contact; 3 pin terminals; Operation: Maintained, 2 Position ON-OFF

Switch Rating: 12V 20A; LED Light Terminal should connect to 12V

☞【What you Get】The Automotive lighting Accessory Kit contains 10 pcs LED indicator lights, 5 pcs toggle switch, 5 pcs toggle switch cover. Totally 20 pcs. One full l convenient car led accessory tool kit could save your time searching suitable tool and money purchasing extra tool!! Making your equipment looks more chic and high-end.

☞【Super Bright Indicator Lights】The kit contains 5 color of indicators, red, white, green, blue yellow. Made of high-quality Brass Alloy Shell and Electroplating Chromium, Metal Holders, 23cm Long Leads, Ultra Bright but Soft Lighting. Anti-shock,Corrosion and Vibration Resistant, Safer and Long Service Time. Work Great!!!

☞【Waterproof Toggle Switch Cover 】Made of Brass and Rubber, 12 mounting hole diameter fits toggle switch perfectly. Easy to use, Great Protector Boot for protecting the almost toggle switches from moisture, dust and dirt.Rubber Material】Made of High-quality heavy duty rubber, super Construction and Durable, Soft enough to resist pressure for your floor jack While sturdy enough to support you jack point. Perfectly suitable for 2-3 ton jack stand.

[ Waterproof Rocker Switch ] --- Rating: 20A 12V DC; Type: 2 Pins (3 Pins with LED); SPST: ON-OFF; LED Color: Blue; Switch Holder: 0.75"/19mm(Inner Diameter); 1.1"/28mm(External Diameter); Package Includes: 5 x Round Rocker Switch + 2 x Switch Holder

[ Soft Lighting ] --- The 12v rocker switch built-in LED lights emit soft light when the switch is powered on and you can recognized it easily. No longer fumble for the 12volt rocker switch but clearly see it at the dark.

[ Easy Installation ] --- The blank holder is convenient to combine the switches 12v to install to any panel. The LED illuminated is equipped with a keyhole slot to prevent unnecessary rotation, no shake, no lossen.

HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty 2 Pole Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles.

6 SCREW TERMINALS: This large DPDT Toggle Switch offers three positions and on-off-on 6 screw terminals for ultimate performance.

VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this 2 Pole Toggle Switch is the obvious choice for your electrical applications.

The briidea toggle switch is made of corrosion resistant brass switch and aluminum plate, accommodates up to 1'' thick panel, sturdy and durable

3-pin up down boat trim switch. Voltage 12V, current 15 Amp, approx. 1-3/4inch W x 2-1/2inch H

Easy to install, waterproof, low power consumption and long service life, save your time and your money

HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty 2 Pole Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles.

4 SCREW TERMINALS: This DPST Toggle Switch offers on-off 4 screw terminals for ultimate performance.

VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this 2 Pole Toggle Switch is the obvious choice for your electrical applications.

FEATURES – Modle: SS12D00G; Contact Type: SPDT on-off; Size: 8.7 x 3.7 x 11.7mm (L x W x H); Pin Pitch: 0.1" / 2.54mm; Terminal Quantity: 3 pins; Terminal Length: 5mm; Knob Length: 3mm; Connector Type: Vertical Through Hole; Mounting Type: Panel Mount; Color: Black, Sliver.

MATERIAL – Plastic, Brass, Sliver Plated: Anti-corrosion and high conductivity; Voltage: DC 50V; Current Rating: 0.5A; Electrical Life: More than 100,000 click; High Temperature Resistance: -13℉ ~ 176℉.

APPLICATION – Used For Arduino, Breadboard, Electronic Circuits, Electronics Board, Microphone, Audio, Video, Electric Circuit, Position Solder, Etc.

Heavy-Duty Pre-Plated Steel Mounting Strap for Maximum Strength

All Screws are Brass Combination-Head for Fast Installation with Standard, Phillips, and Robertson Head Screwdrivers

External Clamp-Type Wiring Terminals Provides Secure Connection of Solid or Stranded Wire for Back or Side Wiring (CSB1 and CSB3)

HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty 2 Pole Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles.

6 SCREW TERMINALS: This large DPDT Toggle Switch offers three positions and on-on 6 screw terminals for ultimate performance.

VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this 2 Pole Toggle Switch is the obvious choice for your electrical applications.

NSi maintained contact and multiple Pole Toggle switch

On-Off circuit function

DPST Poles and throws

Heavy Duty 3 Pole Toggle Switch 3PST On-Off Screw Terminals - Brass and Nickel plated Multi-Pole Toggle Switches are extra durable.

Heavy Duty 3 Pole Toggle Switch 3PST On-Off Screw Terminals features include:

3PST, On-Off

One-piece brass alloy contact arm for reliable electrical performance

One-piece steel strap with integral ground is plated for corrosion resistance

High strength thermoplastic polycarbonate toggle resists breaking and chipping under heavy abuse

Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps

Inclusive of a chrome plated brass handle, mounting stem and face nut

Terminals: 3 screw

Heavy Duty 4 Pole Toggle Switch 4PST On-Off Screw Terminals - Brass and Nickel plated Multi-Pole Toggle Switches are extra durable.

Heavy Duty 4 Pole Toggle Switch 4PST On-Off Screw Terminals features include:

4PST, On-Off

Pull chain switch with off-on-on-on circuit function

SP3T poles and throws

Brass chain with cord actuator

PACKAGE INCLUDED: 10 PCS x Mini Toggle Switch(DPDT 6 Pin 3 Position ON-OFF-ON ),10PCS xM6 weatherproof Rubber Boot Cap Cover.

SILVER CONTACT BASE:Silver plated Brass terminals make the switch operate stably under 6A 250V.The Contact Base can be replaced as it is separated with the switch head.

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

NSi maintained contact and single Pole Toggle switch

On-Off on circuit function

SPDT Poles and throws

Reinforced base resists abuse

Strain relief helps capture wire

Brass terminal screws

Top-of-the-Line Industrial Quality

Heavy Gauge Copper Alloy One-Piece Arm for Top Performance

Large Silver Cadmium-Oxide Contacts for Long Life, Prevent Sticking, Welding and Excessive Pitting

Heavy Duty 4 Pole Toggle Switch 4PDT On-Off-On Screw Terminals - Brass and Nickel plated Multi-Pole Toggle Switches are extra durable.

Heavy Duty 4 Pole Toggle Switch 4PDT On-Off-On Screw Terminals features include:

4PDT, On-Off-On