Best 2 Vehicle Jacks in 2026

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's 3 ton floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3-6/11"/90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process.

Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

LIFTING CAPACITY: 4,000 lbs.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

[100% LIGHTWEIGHT ALUMINUM] - Weighs only 58 pounds which is lightweight for easy portability.

[DUAL PUMP PISTONS] - Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 3/4" - 19 1/4"

[VEHICLE PROTECTION] - Designed with a foam handle bumper to protect vehicle from damage

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

Rapid rise technology reaches max height of 19.3 inches in 7.5 pumps

Side mounted handles for easy jack positioning

Wide track wheels for easy maneuverability

Capacity - 3 Ton (6000lbs), and Lift Range - 6 in. - 21.5 in.

Adapter included increases the overall max lift height by 7.75 in.

Bottom skid plate to keep the jack stable

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

1 YEAR WITH SUNEXPRESS: Get in the express lane with the industry’s leading program and exchange warranted products directly with Sunex.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.

RAPID RISE TECHNOLOGY: Dual pump pistons quickly raise the floor jack saddle to load.

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle

[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle

[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle

Fit for: Camaro jack pads for the 6th gen except convertible

Installation: No drilling required,Easy install

Advantages: These are angled as to not bend the pinch weld as the car is lifted by a floor jack.so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

👍The steel construction of the car jack makes it strong and sturdy. It has a lift range from 3.5 to 13.95 inches, so it gives you plenty of room to get the job done, whether you are changing the tire on a low slung sports car or a truck that is higher off the ground.

👍Make sure you are always prepared for an emergency tire change with the 2.5 Ton Low Profile Floor Jack Swivel Wheels 5000 Lb Car Truck Tire Change Lift.

👍It can easily be stored in the vehicle without taking up much room. The low profile design means that it is just what you need for a lower load.

【Superior Protection】 XunDong Jack Pads are meticulously crafted to shield your vehicle's jacking points from damage during repairs. Say goodbye to bent weld pinches, scratched paint, and costly touch-ups.

【Enhanced Compatibility】 The Jack Pucks are specially designed to fit a range of Corvette models, including C5, C6, C7, and C8, along with Z06, Zr1, and Grand Sport editions. They are compatible with many Porsche models 964, 993, 996, 997, 944 911.

【Stylish Color】 Choose the captivating red color to perfectly match your Corvette's aesthetic. The bright color of the jack pad is easy to see when shops go to lift the vehicle.

[CUSTOMIZED DESIGN FOR RIVIAN]: RIVIGEAR jack pucks are designed specifically to lift the Rivian safely and properly. Protect chassis, battery and aerodynamic panels from damage by wrongly vehicle lifting.

[LIFT YOUR RIVIAN PROPERLY]: The bottom of the Rivian is fully covered in aerodynamic plastic panels and at each corner of the vehicle there exists frame access points, each covered with round plastic caps, requiring the usage of a jack pad puck to allow any jack or lift pad to contact the frame.

[PREMIUM MATERIAL]: Due to the approximately 7,000 lb curb weight, a properly specified jack pad puck is required. RIVIGEAR jack pad puck is precision CNC-machined from T6061 billet aluminum, for proper load rating and lifelong durability, and specifically designed for Rivian fit and usage.

EASY TO USE: Aluminum and steel hybrid construction makes the jack lightweight and easily portable at 64 Lbs. Side rail handles makes the jack simple and easy to position. Rear swivel casters for quick maneuvering.

SAFETY: Integrated overload and by-pass safety valve prevent use beyond rated capacity and over-extension. EVA padded handle provides vehicle protection when jack is lifting.

ADVANCED ENGINEERING: Fully robotic welded oil pump and forged base eliminate oil leakage. Dual pump for quick and efficient lifting speed.

Rated capacity: 3 Ton 6000LB. Lift range: 3-3/4” to 19-5/16”. Jack handle with protective foam bumper sleeve is included

High performance racing jack is made of high strength aluminum frame to reduce product weight and increase portability

Professional dual pump quick lifting hydraulic system saves time and is equipped with safety valve to prevent overloading beyond rated capacity

UNANIMOUS 5-STAR REVIEWS ACROSS ALL RIVIAN FORUMS - With our firsthand experience as proud Rivian owners, we've garnered a substantial following and overwhelming support in all the major Rivian forums

ORIGINAL MAGNETIC TOP RIVIAN JACK PUCK - designed in Arizona by an R1T owner just like you

COMPATIBLE WITH ALL STANDARD FLOOR JACKS AND COMMERCIAL VEHICLE LIFTS - This tested and trusted design is effective in both commercial tire changing facilities and can also be used at home with a floor jack, making it ideal for DIY enthusiasts

【Material】：Machined from solid 6061 grade aluminum and anodized red, bolt on jack pads to be left on the car while driving.

【Fit for】: Camaro jack pads for the 6th gen，except convertible.

【Advantages】:The jack are angled as to not bend the pinch weld as the car is lifted by a floor jack.so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel.

3-1/2 Pumps Lifts Most Work Loads

Lightweight, compact design takes up less space on your shop floor, easier to transport

Constructed for professional race teams out of precision-machined, high strength, aircraft aluminum billet

Precision machined from billet 6061 aluminum, providing a precise and stable lifting solution

Built-in neodymium magnets securely attach the pucks to your vehicle, making alignment, installation, and removal quick and easy.

Hard anodized for added wear resistance, ensuring long-lasting durability and protection against corrosion.

[Compatibility] :compatible with Rivian R1T R1S. The jack is designed to lift the Rivian safely and correctly. Protect the chassis, battery, and aerodynamic panel from damage from incorrectly lifted vehicles.

[Lift your RIVIAN properly] : The bottom of the Rivian is completely covered with aerodynamic plastic panels, and at each corner of the vehicle there are frame access points, each covered with circular plastic covers, requiring the use of jack discs to allow any jack or lifting pad to touch the frame.

[Quality material] : Properly specified jack pads are required as the weight of the repair is approximately 7,000 pounds. The Jack Pad is precision CNC machined from T6061 aluminum billet with proper load rating and lifetime durability, designed for Rivian installation and use.

Maximum Lift Height (in.) 14-1/4 in. and Minimum height (in.) 3-1/2 in. and weighing only 32lbs!

Two-piece knurled aluminum handle for a sure grip, equipped with foam bumper to prevent damage to vehicle finish

Rubber saddle pad to prevent marring

This wheel dolly for positioning heavy-duty vehicles features a built-in jack that can lift individual wheels weighing up to 1250 lbs. It is capable of accommodating tires with a maximum tread width of 12 inches.

Crafted from premium-grade steel, this wheel dolly is built to withstand heavy loads and hold wheels or vehicles with ease. Its sturdy construction ensures that it does not easily get out of shape, making it a reliable tool for moving cars in garages and other tight spaces.

Our car dollies are equipped with four 4-inch swivel casters that can rotate 360 degrees, allowing for easy and smooth movement of vehicles in any direction. The casters are designed to roll effortlessly, ensuring a hassle-free experience when moving cars.

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

EFFORTLESS LIFT: With a lifting range of 3.35"-13.98", our 2-ton floor jack makes it easy to get under even low-profile vehicles. It's ideal for cars, trucks, SUVs and a variety of other lifting support needs

LIGHTNING-FAST LIFT: The dual pump pistons of our floor jack provide rapid raising so you can quickly and easily achieve the desired height for your vehicle

HASSLE-FREE MANEUVERING: This floor jack includes 2 360-degree swivel casters, making it effortless to maneuver and transport