Best 2 Vehicle Jacks in 2026

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack

BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly; Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage

USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs)

BEST PROTECTION FOR YOUR CAR UNDERCARRIAGE: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

MAXIMUM LOAD BEARING 3 TON: Made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand.

PERFECT CUSHION DESIGN: Jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.

RV LEVELING PADS: Function as a multi-use leveler, jack stand, and tongue wheel support for a versatile addition to your tool kit

RAMP FUNCTIONALITY: Attached easy to grip handle acts as a transition between pads for a smooth ramp

STACKABLE DESIGN: Pads lock together tightly for extra stability and dependable use with heavy loads

Great Little Tool. This jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height

Universal Size Design.Maximum Load Bearing : 3 Ton.Pinch weld jack adapter can fit most jacks and vehicles.Please verify dimensions and ensure fitment to your vehicle

Size Information.Floor Jack Rubber Pad Dimensions : 75mm/2.95inch Diameter 35mm/1.37 Height; Slot Dimensions: 10mm/0.39inch Wide 15mm/0.59inch deep

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

【High Quality】Made from highly durable rubber which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.

【Function】A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.

【Pad Dimensions】71mm / 2.8 inches in diameter, 33mm / 1.3 inches height, Slot Dimensions: 13mm / 0.5 inches Wide 13mm / 0.5 inches deep.

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires

24" max height is versatile and lifts high enough for pick-ups and suv's

Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps

【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.

【Fits most Floor Jacks and vehicles】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

【Size】Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

IDEAL USE: Great for lifting cars and light duty trucks

CAPACITY: 4,000 lbs, allowing you to lift almost any kind of vehicle for maintenance

LIFT RANGE: 5 to 15-1/2 inches, ensuring almost anyone can easily get underneath for proper repair work

Load capacity: 1.5T (1500kg/3307lbs) Dimensions:16x3.5x4.1inches (42.5x9x10.5cm).Height height:4.1~15inches (105m~385mm); Net weight: 5.2lbs(2.35kg), Please stay the srew rod always has oil before you use, otherwise it will hurt scissor jack.

The solid base plate also ensures a secure footing, the product can be quite comfortable and easy, folded, carried in the vehicle

It is widely used for smaller to medium vehicles such. B. Pickups, Station Wagon, Van, SUV, Big Van, Mini Bus

Prevent your OE Jack Points from bending when using a jack to lift your car

Fits most Jacks and most late model Corvettes

Durable polyurethane construction, soft enough to absorb hard edges while supporting the vehicle

Updated Designed Scissor Jack Adapter: Bolt Length extended to 45mm. Compares with 40mm bolt, It will fits more scissor jacks.

Easily raise, lower and level your scissor jacks faster and more easily than ever. For use with 1/2" impact wrenches, drills or standard drive sockets. Labor saving !

Suitable to most of loop type or double eyelet type scissor jacks in the market.

HIGH CAPACITY - This jack has a load capacity of up to 20 tons (44000 LBS) and a maximum pressure of 200PSI; With its powerful function, it is the best tool for car maintenance and auto emergency treatment

STURDY ROD AND SPRING - The height of the rod can be adjusted flexibly, with strong resistance to pressure and corrosion; Equipped with a high complex double spring, it has the compact structure to ensure that the product can be successfully reset after use

SPLICING HANDLE - The 2 handles can be connected to each other, which is convenient to use and easy to store; The bottom of the handle is equipped with a plastic sheaths, which can effectively protect the hands from injury

Product 1: 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Product 1: Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Product 1: Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

[Swap Tires Faster]: Quickly remove flat tires with ABN Scissor Jack Drill Adapter; With minimal force, you can raise, lower, and level your scissor jacks without the need of a crank handle tool

[How to use]: Slide drill jack adapter onto the scissor jack and stick the bolt and washer through the predrilled holes of the adaptor and jack; Insert the crush washer, bolt washer, and nut on the opposite side and tighten the bolts securing the impact jack adapter to the scissor jack

[Pro Safety Tips]: Store a scissor jack and drill car jack adapter in your trunk in case of emergencies; Always ensure you are on a flat surface when lifting your vehicle; Do not lay under your vehicle while the car is lifted

Made of Durable rubber construction and deep cross slotted design, provides more cushion and crush resistance.

Jack pad is strong enough to support your lifting point and soft enough to prevent bending or fracture of clamping weld and frame longitudinal beam when jacking up your car.

Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.

Package includes: 1 Floor Jack of 3 Ton, 2 Jack Stands of 3 Ton, Floor Jack Handles, Manual. Construted with heavy duty steel, the floor jack with jack stands combo set provide easy lifting and long term durability

The floor jack features dual piston quick lifting pumps that allow you to easily lift the jack to the desired height, rubber saddle to help protect your vehicle, and overload protection valve that protect you from lifting overweight items that weigh more than the jack's capacity

BILT HARD Hydraulic Trolley Floor Jack provides weight capacity up to 3 ton (6000 lb) with lifting height ranges from 3.34-18.50 inches, enables an easy access to low profile vehicle. It is equipped with four 360-degree swivel casters for convenient and smooth move

Scissor jack adapter can reduce time and effort to raise or lower scissor jacks

Made of very solid chrome wanadium steel

For 1/2" drive impact wrench or 13/16" lug wrench/tire iron or socket

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13"

The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

The floor jack has a large saddle surface area for better contact with the load being supported

【The Best Protection for Your Car 】HXXF jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

【PERFECTLY FITS】The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002. Please verify dimensions and ensure fitment to your jack and vehicle.

【HIGH QUALITY】Made of heavy duty construction and durable rubber material for 2-4 ton floor jack. Maximum load bearing: 2-4 Ton.

Steel floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 5-1/8" to 18-5/16", which is ideal for most cars, trucks, and SUVs

🚗 【 High Quality】 ------ Made of heavy duty construction and durable rubber material for 2-4 ton floor jack. Maximum load bearing: 2-4 Ton.

🚗 【Universal for Most Car 】------The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002. Please verify dimensions and ensure fitment to your jack and vehicle.

🚗【Size】Round Type Jack Pads: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. V-Type Jack Pads: Length-63mm, Hight-50mm, Width-44mm, Groove depth-17mm.

Jack it Up: With 2.5 tons/5500 lbs strong loading capacity, VEVOR's floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3.35"/85 mm. Max. Height: 14.96"/380 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a single piston hydraulic pump allows you to pump the jack to the desired height easily.

Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the handle on the top is convenient for you to lift the jack.

🏎️【Durable Rubber Jack Pad Rubber】 Jack Pad is made of durable rubber structure and cross slotted design which will provide greater cushioning and compression capacity. Warm Tips: Because of pinch weld jack adapter is newly factory production and heavy duty rubber material, so this jack rubber pad will has a little bit rubber smell, please put it in the ventilation room for some while! Please do not mind it.

🚙【Universal Floor Jack Pad for most vehicles】 Floor jack rubber pad puck fit most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

🚗【Easy To Use】 Jack pads for floor jack is a slotted crossline on the top of the pinch weld jack adapter, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack.

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

【Quality Shoehorn】This metal shoe horn for boots and shoes have a smooth “brushed” finish and will not bend or break,making it a great addition to your shoe accessories and an attractive long handled shoehorn to hang in your home or office

【Durable Material】Made of high quality stainless steel,this extended shoe horn is built for a lifetime of use,which can resist damage,scratching and warping.Sturdier than a plastic shoe horn, our metal shoe horn with long handle will keep its strength with constant use

【Ergonomic Design】Perfect as a long shoe horn for seniors or anyone with assisted mobility issues,or as long shoe horns for men,women,pregnancy or kids.Now you can put on your shoes sitting or standing,without having to bend in a way that could hurt your backs.Seniors will appreciate for its aesthetic appeal

The sets contains 2 kinds of Jack Pad Adapter, V-Groove Single style and Round style, 2 pieces each style.Different size and shape could meet your various needs.

Made of High-quality heavy duty rubber, super Construction and Durable, Soft enough to resist pressure for your floor jack While sturdy enough to support you jack point. Perfectly suitable for 2-4 ton jack stand. Please verify dimensions and ensure fitment to your jack and vehicle.

Round Type Jack Pads: 71mm Diameter 43mm Height, Slot Dimensions: 13mm Wide 13mm deep. V-Type Jack Pads: Length-60mm, Hight-50mm, Width-44mm, Groove depth-15mm.