Best Guinea Pig Wheels in 2026

25 Pack Premium Metal Cutting Discs

4-1/2" x 1/16" Cut Off Wheel with 7/8" Arbor

1/16 Inch (.0625") Thickness for Long Life and Increased Durability

🗿LONGEST LASTING: 6 in cut off wheels for metal feature metal center and ultra-thin 0.040" thickness. 25 pieces cut off wheels for metal & stainless steel meet ANSI safety requirements. Dimensions: 6"x.045"x7/8"

🗿 FITS ANY ANGLE GRINDER: 25 PCS cutting disc for metal & stainless steel fast burr-free cutting features 6"x.040"x7/8", compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.

🗿 MULTIPLE UESES: 6 cut off wheels for metal are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals.

☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8"

☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up

☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.

Premium and Value Materials - Panlen cutting discs are made of aluminum oxide grains that are durable and safe. It also provides aggressive cutting action and longer service life.

Longest Lasting - Cutting wheels metal center and 0.045" thickness,provide the best balanced Cut Life, Cut Rate, Cut Precision,allowing you to cut longer.

Perfect Size - Outer diameter:4 1/2 inch inside diameter:7/8 inch, operating up to 13,300 RPM. fit for most angle grinders, such as Dewalt Makita Bosch milwaukee.

✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and stainless steel.

✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.

✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr-free cutting with minimal material loss, making the cutting project more precise and efficient.

DESIGNED FOR SHARP & CLEAN CUTTING ON - Exclusive top-grade raw materials and 0.04in ultra-thin thickness, optimized the performance of PEGATEC general purpose metal cutting wheels. The resulting fast cutting times keep at a minimum both burr formation and the thermal load both on the workpiece and on the cutting-off wheel. Which means less rework and higher efficiency.

SUPER LONG SERVICE LIFE - The cut off wheels 4 1/2 inch are suitable for professional scenes demanding high aggressiveness and long service life. Due to the perfect ratio of BASF resin and high-quality alumina, silicon carbide, they’re extremely durable with 2.5 times of service life than the conventional brands. For a good craftsman, this means that the time to replace the cutting disks is greatly saved.

MULTIFUNCTION AND SELF-SHARPENING - The PEGATEC PEGASTAR series angle grinder cut wheel is a special performance grade for performing demanding tasks. It had strong aggressiveness for metallic material such as iron, angle steel, stainless steel and ferrous metals. Its self-sharpening, provides balanced cutting performance throughout the cutting process.

🛠️【PERFECT SIZE】Perfectly compatible with all 4-1/2 inch(115mm) angle grinders with 7/8 inch(22.2mm) arbor. Thickness:0.045 inch(1.2mm). Operating up to 13,300 RPM.

⚙️【 PRECISE AND QUICKLY】0.045 inch ultra thin design for fast burr free and precise cutting perforamce with minimal material loss.

🦾【SAFETY - AVOID WHEEL SHATTER】Metal cutting discs are made of aluminum oxide grains. More safe than other wheels that may shatter or prematurely wear. Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

UNIVERSAL - Our cut off wheel has a CONSTANT DIAMETER that allows dry cutting of metal, rebar, iron, metal profiles, aluminium, different types of pipes and other sheet metals.

LONG LIFE - According to the test results, GRAFF BLACK enables us to make more than 5000 cuts. The increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the cutting segment.

CONVENIENT IN OPERATION - Our cutting wheel is more comfortable in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting.

10 Milwaukee Premium Type 1 Metal & Stainless Steel (INOX) Cutting Wheels | 4-1/2-Inch x .045-Inch x 7/8-Inch

Extremely thin .045-inch wheel design for fast, straight cuts with minimal burr

Industry's fastest rotating cutting speed for maximum productivity with the most demanding Metal & Stainless Steel cutting applications | Cuts up to 50% Faster, Lasts up to 20% Longer than Industry Standard 1/8" cutting wheels

SPECIFICATIONS：4" x 7/8" x 4/5" x 5/8" (100mm x 22mm x 20mm x 16mm). Please double check the size info before purchase.

HOLE DESIGN: The angle grinder concrete grinding wheel features air holes designed to aid in maintaining and cooling the cutting pattern and reducing wear

FAST CUTTING AND DURABLE: Our diamond cup grinding wheel provides for very fast cutting action on masonry, stone, and concrete. High diamond concentration for long life and aggressive material removal. This diamond cup grinding wheel featured large grinding segments with heat-treated steel bodies increases durability and wheel life.

Benchmark Abrasives metal cutting wheel with a 5" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (12000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

【Size】4-1/2-Inch x .047-Inch x 7/8-Inch

【PERFORMANCE】This is for a pack of 5 pieces of our cutting wheels Thin 0.045" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S

【Advantage】Thin .045-Inch wheel design for fast burr free cutting Proprietary aluminum oxide grain combination for aggressive cutting action

Diamond cutting discs X-LOCK - Best for Hard Ceramic

Perfect for use in hard porcelain stoneware, tiles, ceramic tiles (also glazed) and stoneware

Also suitable for use in roof tiles, granite, natural stones and cement bonded fibreboard

✅ 10 MAKITA 4-1/2” Depressed Type 27 Cut Off Wheels for Flush Cuts on Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders

✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup

✅ FLUSH CUTS SMOOTHLY, Easily & Quickly through All Hard to Reach Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix

Bonded abrasive wheel with the X-LOCK mount design – offers a faster, fixed mount and high-quality Aluminum Oxide grit

X-LOCK wheel change – features snap-on mounting and a wheel-release lever on grinder for change-out that's up to five times faster

Tool-free disc swap – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts

4-1/2x0.045x7/8 inch Metal Cutting Wheel, Max 13300 R.P.M., compatible with 4-1/2” Angle Grinders, such as Bosch 1375A, Makita 9557PBX, DEWALT DCG414B DWE402, PORTER-CABLE PC60TAG, Black & Decker BDEG400 and more

Thin Cutting Disc is designed for fast burr free cutting, quickly and effortlessly cutting through All Metal, Steel and Stainless Steel

Cut-off Wheel is fully reinforced with 2 bonded sheets of Fiberglass mesh for added safety and durability

✅50Pack 4.5" x 3/64" x 7/8" Premium Stainless Steel Cutting Discs is operating up to 133,00 RPM and 80M/S.

✅Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals

✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance

★ Product Sizes ------ All 3 Cotton Buffing Wheel Height: 1/2” ; Diameter: 6”. 4 Compounds: Black/Brown/White. Length: 4-3/4” ; Width: 1” ; Height: 3/4” and 4 oz.

★ With 3Pcs Different Colors Polishing Compounds ------ The Compounds are designed to be applied on buffing wheels by simply spinning a buffing wheel on a motor/drill and gently pressing the compound against the wheel while the heat/friction will transfer the compound onto the polishing wheel.

★ Good Working and High Quality ------- This Cotton Wheel Pads is built for long wear and consistency when smoothing - Fits Power Drills, Die Grinders, Air Grinders, Angle Grinder, Drill Press, and most of all other rotary power tools.

【What you Get】The 4 inches polishing buffing kit with polishing compound set contains 1pcs denim wheel, 1 pcs 30 Pcs Flannel wheel, 1 pcs (36 ply) yellow wheel, 1 pcs (50 ply) cotton wheel, 1 pcs brown tripoli, 1 pcs white diamond buffing compound, 1 pcs general green compound, 1 pcs  metal shank, totally 8 pcs . All-in One buff wheel compound set is perfect for rough, medium, fine, delicate polishing treatment.

【Premium Buffer Wheel&Compound Kit】Made from high grade cotton/denim/ sisal with thick stitching for extra long life. The soft material couldn’t damage your cherished objects while using cloth wheel. The multi-layer cotton threads are fixated together, so that they are durable, wear resistance and have a long service time. The Polishing Compounds are made of high content of abrasive material, high hardness, strong grinding force, rapid polishing, high efficiency.

【Easy To Use】Each polishing pad is suitable for different compound so that feel free to match. You just need to choose the compound according to your demand. Easy to apply them: Install the cloth wheel on the polisher. When the cloth wheel rotates at high speed on the polisher, apply polishing compound. Because when the cloth wheel is warm, the wax will be soft and stick to it.

【EXTRA LONG LIFE & SMOOTH GRINDING】Merryland Grinding Wheel 4.5 inch Metal Steel Grinding for Angle Grinder. 5 Star Expert-Line. Made of German Phenolic Resin and Refined Calcined Corundum. 35~50% Better Than Ordinary Grinding Wheel. Top Quality and Extra Long Life!

【REINFORCED STRUCTURE & SAFETY GUARANTEED】4-1/2 X 1/4 X 7/8 Grinding Wheel. 1/4 Thickness Professional Grinding Disc, 3 Layers of Reinforced Fiberglass Mesh, Max RPM 13300, According to European Standard EN 12413, MPA Certified. Safety Guaranteed!

【WIDE APPLICATION & SPECIFIC MATERIAL】Metal, Iron, Steel, Stainless Steel / INOX, Sheet Metal, Plastic, Steel Pipe. Suitable for Grinding a Wide Range of Materials. E31076043 is BEST for Grinding Steel!

✓DESCRIPTION - The Drixet 6” Cotton Treated Buffing Wheel will help you get a smooth and mirror-finish by using it to buff or polish a wide variety of surfaces helping you handle all kinds of projects.

✓QUALITY - This drill buffing wheel is made from the highest quality and is built with 80 layers of fabric for long wear and consistency when buffing.The polishing wheel fits all types of rotary power tools like drills and grinder, and by adding a mandrel it also fits on tapered spindle polisher.

✓SPECS – The polishing wheel’s for bench grinder, center hole is 1/2” in diameter and the wheel is 6” in diameter. The wheel is also 80 ply (approximately 1”) in thickness.

【Upgraded Version】People are complaining that the old version grinder wheel is too small to fit the 1.61” size flange nut. To fix this problem we enlarged the center hole diameter of our wood carving disc, now it will fit all kinds of flange nuts in the market.

【Universal Applicability】Our angle grinder attachments set is designed for all standard 4" or 4 1/2" and 5" angle grinders with 5/8-11 shaft, and it also comes with a reducing bushing, which can reduce the bore diameter 7/8" to 5/8" to fit M10 angle grinder shaft.

【Strong & Durable】Provides rapid material removal, saving your time and effort, especially for convex and concave areas. The wood carving disc is made of carbon steel, which has a strong structure, is not easy to fracture and deformation, and can provide a long service life.

DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life.

EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal.

SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating.

made of high quality of diamond,

Large grinding segments with heat treated cup design.use long life.

Use dry/wet to smooth concrete or field stone.Perfect for use on grinding on marble, tile, concrete and rock.

AGGRESSIVE GRINDING - high peformance grinding wheels designed for fast stock removal on concrete, curb gutters, expansion joints, high spots, epoxy, paint, mastics or coating removal

HIGH QUALITY DIAMONDS - contains higher grade and higher concentration of diamond grit than standard grinding wheels

GRIT SIZE/SEGMENTS - #30/40 grit with arrow segments

【PERFECT SIZE】：The cut off wheels are suitable for most angle grinders-compatible with all 4-1/2" angle grinders and 7/8" arbor, operating speeds up to 13,300 RPM.

【GREAT PERFORMANCE】：The 4-1/2"cut off wheels are featured with high hardness, durability and wear resistance. And the Internal double glass fiber reinforcement in these ultra-thin cutting wheels provides the ultimate in safety and longer life.

【WIDELY USED】：The Angle grinder cut off wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, steel pipe, metal pipes, tubes and all other ferrous metals.

made of high quality of diamond,

Large grinding segments with heat treated cup design.use long life.

Use dry/wet to smooth concrete or field stone.Perfect for use on grinding on marble, tile, concrete and rock.

HIGH QUALITY MATERIAL： Made of soft thick wool, soft & enviromental-friendly natural material without scratching the surface when polishing.

SIZE：Outer Diameter: 4inch; Second inner diameter: 1.88inch; innermost diameter: 0.62inch; wool pad thick: 0.4inch

STURDY & DURABLE: The disc pad is wear resistant and safe for long service period.The plastic cover and high density and long wool discs are tightly connected for long term use.

✓The die grinder cut off wheel Set Ultra-thin design for minimal material loss die grinder cut off wheel latest innovation in abrasives, these grain micro fractures to allow a continuous supply of the sharpest cutting edges. These discs provide the fastest cut as well as the best utilization of the entire grain for the longest life, especially on stainless steel and high alloy materials.

✓Specification: grinder discs for metal For use on an Angle Grinder, die grinder disc Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch, 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor

✓Quality: Cut off wheels Applying to cutting all metals including stainless steel and cast iron, thin cut off wheels Benchmark Abrasives uses only the highest quality grains and backing material for our flap discs, cut of wheel High performance! Exposed during use to maintain an aggressive cutting edge, air cut off wheel metal cutoff longer service life in normal steel

made of high quality of diamond,

Large grinding segments with heat treated cup design.use long life.

Use dry/wet to smooth concrete or field stone.Perfect for use on grinding on marble, tile, concrete and rock.