Best Bkl in 2026

BKL 566 1" LONG DOVETAIL TO WEAVER ADAPTOR MOUNT - This Adaptor is designed to accept Weaver-style mounts; Model 566 mounts to 3/8" or 11mm dovetails; It is ideal for Red Dot scope mounts

QUICK AND EASY INSTALLING - Slide the BKL 566 Adaptor Mount over the dovetail of the gun, secure mount by tightening the clamp screws and you have a platform that accepts weaver style mounts

CLAMP SPREADING - If mount slot of the adapter is not wide enough to fit over dovetail of the gun, clamping screws can be switched to BKL's unique Spreader Holes to evenly push clamping legs apart allowing the mount base to slide onto the dovetail

BKL 257H DOVETAIL SCOPE RINGS HIGH - Designed for the shooter who needs stability and prefers independent rings; Model 257H is for 1" diameter scope tubes and fits all standard 3/8" and 11mm airgun dovetails; 0.2" taller than Model 257

ONE-PIECE CLAMPING BASE - Strong one-piece clamping base of BKL 257H Rings allows quick and easy mounting of 1-inch scopes, and also guarantees that when it's mounted on your scope rail, your scope is going to be in perfect alignment with the bore

AUTO-CENTERING TECHNOLOGY - Patented Auto-Centering technology solves the problems created by varying mounting rail widths; Clamping Legs move equally as the clamping screws are tightened keeping the scope centered on the rail

BKL 261 4" LONG UNITIZED DOVETAIL SCOPE MOUNT - This model is for 1" diameter scope tubes and fits all standard 3/8" and 11mm airgun dovetails; Designed for the serious shooters who want a solid mounting set-up on their bolt action required

UNITIZED DESIGN - Strong one-piece mount guarantees that when it's mounted on a scope rail your scope will be in perfect alignment with the bore; The port clearance allows loading and cartridge ejection on both left and right hand models

AUTO-CENTERING TECHNOLOGY - Patented Auto-Centering technology solves the problems created by varying mounting rail widths; Clamping Legs move equally as the clamping screws are tightened keeping the scope centered on the rail

BKL 300 DOVETAIL SCOPE RINGS - Designed for the shooter who needs stability and prefers independent rings; Model 300 is for 30mm diameter scope tubes and fits all standard 3/8" guns and 11mm airgun dovetails

ONE-PIECE CLAMPING BASE - Strong one-piece clamping base of BKL 300 scope rings allows quick and easy mounting of 30mm scopes, and also guarantees that when it's mounted on a scope rail, your scope is going to be in perfect alignment with the bore

AUTO-CENTERING TECHNOLOGY - Patented Auto-Centering technology solves the problems created by varying mounting rail widths; Clamping Legs move equally as the clamping screws are tightened keeping the scope centered on the rail

BKL 304 DOUBLE STRAP DOVETAIL LOW RING - This sturdy ring designed for the target shooter looking for more dovetail clamping surface; Made for 30mm diameter scope tubes and fits all standard 3/8" and 11mm dovetails

ONE-PIECE CLAMPING BASE - Strong single-piece clamping base of BKL 304L Ring allows quick and easy mounting of 30mm scopes, and also guarantees that when it's mounted on a scope rail, your scope is going to be in perfect alignment with the bore

AUTO-CENTERING TECHNOLOGY - Patented Auto-Centering technology solves the problems created by varying mounting rail widths; Clamping Legs move equally as the clamping screws are tightened keeping the scope centered on the rail

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

UTG Super slim Picatinny riser mount, 0.83" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

For receivers with Mil-Spec 1913 Picatinny rails

Rear ring pushed 1" forward for better eye relief

6061 T6 extruded aluminum + anodized black finish

Machined from domestic 6061 T6 extruded Aluminum, Matte Black finish only

Center spread - 3.825", overall length of mount - 6.670", Mauser 98 scope mount does not fit the 3000 L

Picatinny cross slots run the full length of the rail; center channel reduces overall mass of mount

Model #177095 - Mark scope mount in size 34mm in Matte finish

Use this cantilever mount for mounting 30mm tubes.

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting

The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base.

Made with pride in the USA

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails

Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns

Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

STRONG DURABLE MOUNT - The Scalarworks LEAP Red Dot Mount for the Trijicon MRO is one of the most rock-solid quick-detach red dot mounts on the market; the re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail

7075-T6 ALUMINIUM CONSTRUCTION - LEAP red dot mounts are machined from 7075-T6 Aluminium and use 4140H steel hardware for absolute rigidity that results in a near seamless integration between your rifle and optic

CLICKDRIVE MECHANISM - The ClickDrive mechanism is also intuitive, self-adjusting, and completely recoil proof; thanks to the ClickDrive mechanism and the mount's absolute rigidity, LEAP mounts are guaranteed to hold AND return to zero

Product 1: This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.

Product 1: The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.

Product 1: This mount positions the center of the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base.

MAXIMIZE PERFORMANCE - Low profile design paired with smoothly rounded snag free edges gives you all the benefits of added modularity without the draw backs of unnecessary bulk and weight.

BUILT TOUGH - Engineered out of T6-6061 aluminum to ensure your most expensive and integral equipment remains safely secured when you need it most.

AMERICAN ENGINEERING - Proudly designed and manufactured in the US of A. Is there really any other way to do it?

Slim design only takes up one rail slot on standard picatinny rail.

1 x rail charm mount kit

1 x hex key adjustment tool

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles

Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required

Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Mount base mechanism comes equipped with custom locking bolts that slot seamlessly into your rail system with zero wiggle - guaranteed to hold zero against the toughest of recoil. Avaialble for either Picatinny or Weaver bases.

The Burris P. E. P. R. mount is perfect for mounting your scope forward on your personal protection rifle.

The Proper Eye Position Ready (P.E.P.R.) mount provides 2" of forward scope positioning room which will allow you to obtain proper eye relief and maintain a proper shooting position.

Provides optimum eye relief and full field of view helping to improve your accuracy

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Picatinny riser mount for use with Picatinny or Weaver base optics

2.5 inches in length with 5 Picatinny rail slots

Low profile riser provides 0.42 inches of rise