Best Caché in 2026

Bundle comes with: Radio Dash kit, CACHÉ Butt connectors, wire harness, and antenna adapter for installing an aftermarket radio. Total 4 Items.

BEFORE BUYING PLEASE READ ***IMPORTANT NOTE*** THIS KIT IS FOR STANDARD UNITS ONLY. HARNESS WILL NOT retain steering wheel controls, OnStar, door chimes. NOT FOR PREMIUM SOUND SYSTEMS OR VEHICLES WITH REAR TUNERS.

When replacing your factory radio with an aftermarket car stereo, a wire harness is a must for a quick installation. It eliminates cutting your OEM radio plug and helping to maintain your cars value.

20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder

3 Foot - 8 Gauge Black Ground Cable

16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire

✔️【PREMIUM QUALITY】Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for

✔️【DURABILITY】Each terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector

✔️【WATERPROOF】Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360 degree secure seal. It's flame-retardant, waterproof, and can be used underground

Harness Cloth Tape Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard.

Harness Cloth Tape Material: These wiring harness tape are made of high quality cotton flannel and strong adhesive glue.

Harness Cloth Tape Features: 1High Adhesive Force 2 Noise Resistance Well 3 Strong Abrasion Resistance 4 Hand Tearable 5 Strong Chemical Resistance.

Mounts aftermarket radio in console pocket location

Recessed DIN radio opening

ISO mount radio compatible using snap-in ISO radio mounts and trim ring

Includes dash kit, wire harness, antenna and connectors

Direct connection to the factory harness without cutting any wires

Kit is made from high quality ABS, harness is made from factory quality wires and connectors

Connects to the factory stereo harnesses when installing an aftermarket stereo

Not compatible with factory amplified systems

Direct Connection to the factory harness without cutting any wires

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

Allows new aftermarket stereo to be installed in factory location

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

✅ [STRONG ADHESION] GradCap Magnetic Phone Sticker is using 3M double-sided grade quality sticker and that is why it provides strong adhesive on its back - Keeping your device secure and stable while driving on any road conditions. Our Magnetic Plate will leave no marks or residuals after removing out from your phone or mobile case.

✅ [ULTRA THIN AND LIGHT] Although our metal sheet is made of premium-quality manganese steel material, the product is still less 0.5 mm in thickness.

✅ [COMPATIBILITY] These Car Metal Discs can work with all magnetic car mount, air vent holder, dashboard mount, windscreen mount, automobile cradle - Car Accessories which ideally designed for all drivers.

Includes everything needed to install an aftermarket radio into your 2009-2010-2011-2012-2013-2014-2014 Ford F-150; compatible with single ISO with pocket or double DIN

Single ISO with Pocket or Double DIN Dash Mounting Kit for 2009-2014 Ford F-150; fits all trim levels - see image for reference

Antenna Adapter for 2009-2014 Ford F-150 models

Includes everything needed to install an aftermarket radio into your 2009-2010-2011-2012-2013-2014-2014 Ford F-150; compatible with single ISO with pocket or double DIN

Single ISO with Pocket or Double DIN Dash Mounting Kit for 2009-2014 Ford F-150; fits all trim levels - see image for reference

Antenna Adapter for 2009-2014 Ford F-150 models

Allows new aftermarket stereo to be installed in factory location of vehicles with a non-factory amplified systems

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

Allows new aftermarket stereo to be installed in factory location; Does not retain Steering Wheel Controls

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

This BATIGE flush mount cable design for car,boat and motorcycle,dual USB 3.0 A male to USB 3.0 A female extension flush panel mount waterproof cable.

Mount cable can be used above the base of the car's dashboard or on the other dashboard,such as boat,motorcycle.

Use an existing hole or cut a hole on your dashboard and clip in the socket to flush mount it to your vehicle's,boat’s and motors.

15v rms max input level

12.2v max output level

frequency response: 10hz-35, 000hz

For Cobra 75WXST CB Radios

Fits for Wrangler JK Models 2011-Present

Iron Clip Separate For Yeasu Series FT-1807/FT-1907/FT-7800/FT-7900/FT-8900/FT-8800 also

Universal Under Dash/ Overhead Car stereo mounting Dash kit

Radio Housing

For Car Installation

Precision designed for a gapless fit between the dash and the Dash Kit

Color and Texture matches the factory dash

Easy to install. No special tools are required. Includes step-by-step instructions

Allows new aftermarket stereo to be installed in factory location

Precision designed for a gapless fit between the dash and the kit

Color and Texture matches the factory dash

Allows new aftermarket stereo to be installed in factory location

Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the Dash Kit

Allows new aftermarket stereo to be installed in factory location; See fit guide in images to verify that your vehicle is compatible

Fits Double DIN stereos with a maximum screen size/faceplate opening of 3 13/16" x 6 13/16" (96.8mm x 173mm)

Precision designed for a gapless fit between the dash and the dash kit

Compatible with Mitsubishi Lancer / Lancer Evolution 2007-2017

Installation kit that allows the replacement of the OEM radio with a after market radio; kit Features; iso din head unit provision; painted Silver to match factory finish;

Kit components; A) Radio Housing; B) Radio ISO Brackets; C)(4) #8X3/8IN Phillips truss head screws;

Wiring and antenna connections; harness: ; xsvi-5524-nav ford interface 2014-up (sold separately); antenna adapter: ; 40-eu10 multi-app adapter (sold separately);

16FT 10 Gauge Red Power Wire;2FT 10 Gauge;Brown Ground Wire;16 FT Blue speaker wire;16.4FT Blue Remote Wire..

Low noise and distortion, this amplifier runs quietly and efficiently.

With a Gold Plated AGU In-line Fuse( maximum current:60A) Holder to protect the audio system from damage by the overload current.

Size of the Iron Part - 185 x 115 x 100 mm. Please confirm whether your car model is suitable before purchasing.

Size of the Plastic Frame - Outside 185 x 115 mm, inside 180 x 100 mm. Before purchasing, please compare the dimensions with your car stereo carefully. If you are not sure, please contact us directly for confirmation.

Features - Car Panel Frame Easy installation, This iron frame is suitable for standard double din head unit.

Universal Double Din Stereo Fitting Cage Kit 182*101mm Radio Head Unit.

Secure & Universal fitment with the strong metal design, easy for installation

This fitting cage fits most Double Din aftermarket head units. It is designed to securely hold the stereo in the dashboard.

3.5mm to 3.5mm (male to male) interface connection cable

Dash mountable 3.5mm to stereo RCA audio input port (female to male)

This cable is waterproof panel/dash mount with rubber

Compatible with Chevrolet: 2007-2013 Avalanche, 2007-2013 Equinox, 2008-2015 Express 1500, 2008-2015 Express 2500, 2008-2015 Express 3500, 2006-2016 Impala, 2006-2009 Monte Carlo, 2007-2014 Silverado 1500, 2007-2014 Silverado 2500, 2007-2014 Silverado 3500, 2007-2014 Sierra 1500, 2007-2014 Sierra 2500, 2007-2014 Sierra 3500. 2007-2014 Suburban, 2007-2014 Tahoe, 2009-2017 Traverse, 2006- 2011 Chevy HHR, 2007-2011 CAPTIVA, Malibu LS 2008-2011.

Replacement for GMC: 2007-2012 Acadia, 2006-2015 Savana 1500, 2006-2017 Savana 2500, 2006-2015 Savana 3500, 2007-2014 Yukon, 2010-2014 GMC Yukon XL 1500, 2009-2010 Chevy cobalt ,2007-2009 Pontiac Torrent. 2007 Hyundai santa fe.Pontiac G5 2007-2010,Pontiac Solstice 2006-2010.

Fit for BUICK Enclave 2008-2012, BUICK Lucerne 2006-2011, 2009-2010 Pontiac Vibe, CADILLAC DTS 2006-2011, CADILLAC Escalade 2007-2012, CADILLAC Escalade ESV 2007-2012, CADILLAC Escalade EXT 2007-2012, CADILLAC SRX 2007-2009,HUMMER H2 2008-2009, PONTIAC Trent 2007-2009, PONTIAC Vibe 2009-2009, SUZUKI XL-7 2007-2009.