Best Fuel-Tool in 2026

The industrys first and only

Male End Rebuld Kit

Replacement VitonR O-rings

Provides for fast and easy professional installation of check valve O-ring or rebuild kit without having to remove tank from the bike

Provides for simple, fast and accurate fuel pressure checks

Briggs & Stratton 395051R

Bulk 25-feet

7/16-inch outer-diameter by 1/4-inch inner-diameter

For selected engines that contain a fuel see-through fuel filter design Designed to exact OEM standards, Manufactured and tested to help deliver optimum performance

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Resistant to 180 degree heat.

Resistant to oil and gas.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Compatible with B&S 808492 808656 491922 691034 692313 807429 808281 808322 557033.

Compatible with Cub Cad LTX1046VT LTX1050VT SLTX1054VT LTX1046 LTX1050 SLTX1054 GT1222 GT1554VT LT1018 LT2180 LT1024 LT1022 Lawn Tractor.

Compatible with Ryobi # 308459007; Ryobi RYi2000T RYi2000TA RYi2200 RYCi2001 RYi2200A RYi2200G RYi1000 Digital Inverter Generator; Yama-ha G16 G19 G20 G22 G29 golf cart.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

Package includes the following 4 different size fuel line hose,Please undetand that there maybe 1-3 cm dimensional deviation due to manual measurement.

The Size of small engine fuel lines: I.D. x O.D: .080" x .14", overall length: 4 feet; I.D. x O.D: 3/32" x 3/16", overall length: 4 feet; I.D. x O.D: 1/8" x 3/16", overall length: 4 feet;I.D. x O.D: 1/8" x 1/4", overall length: 4 feet.

Fuel lines will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant.

Material: tygon, heavy-duty and durable to use

Corrosion resistant fuel line, also resist hardening and low temperature, No Metamorphose

Total 20 feet length including 4 sizes(5 feet each), satisfy most you need

Specs: ID: 1/4". OD: 3/8". Length: 10'. Color: Clear Yellow. Ethanol: Compatible with greater than 10% ethanol fuel

Special formulation for all power equipment. Resists swelling and hardening. Oil and gas resistant. Maintains air tight seal on fittings even in extreme temperatures

Stens one-year warranty ensures reliability and performance for every part

ID: 13/32". OD: 0.543inch.Length: 10 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.

Applicable Medium: all automotive fuels, lubricants, and coolants.

Part#394358s in display packaging

Replaces Briggs & Stratton Service Part #394358s

For Lawn Tractor Engines with out a Fuel Pump

Low permeation 5/16" (8mm) inside diameter fuel line hose

Durable, flexible, long lasting fuel line

Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight.

Original Saint-Gobain Fuel Line

5 Feet

ID: 3/16"

These hose clamp made of high quality 65Mn spring steel,durable in use and have a long serving time.

Fit for hose air hose, water pipe, silicone hose, automotive fuel line, etc.

Easy to tighten since it is out away from the clamping surface.

Complete kit specific to motorcycles with Flathead, Knucklehead, Shovelhead and Panhead engines as well as V-Twins operated in hot climates or with wide clearances

*2007-up H-D motorcycle with the 96-inch and larger Twin Cam engines, users must purchase one extra bottle of Primary Chain Case Oil to meet this engine’s 38 oz (45 oz dry) capacity, compared to the 32 oz wet capacity of a Milwaukee-Eight, Evolution or V-Twin case

Includes 5 quarts of 20W60 Motorcycle Oil, 1 quart of V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain Case Oil, 1 bottle of Fuel Injection Cleaner for Powersports, a sticker kit, a Red Line Oil embroidered hat and a versatile funnel

Gas line replacement

1/4-inch I.D. x 3 Foot Clear Tygon Premium Fuel Line

5/16-inch I.D. x 3 Foot Clear Tygon Premium Fuel Line

Plastic In-Line Fuel Filters

3/8" Inlet & Outlet

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

★ High Quality Petrol Fuel Line Kit, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature

★ 4 Colors Representing 4 Sizes, More Convenient to Use, Color: Yellow Transparent, Blue Transparent, Colorless Transparent, Red Transparent

★ 4 Sizes Different Diameter, Each Size Has 5 feet Length, Enough for Most Using

COMPATIBILITY: 3/8 Barb Female Fuel Line for Yamaha/Mercury Outboards and Mercury Fuel Tank Side - Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7

FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends

DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant

Fuel line: 1/4" ID. x 1/2" O.D, overall length 2 feet, Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts.

Compatible with Kohler 24 393 16-S, 24 393 16, 24 393 04-S, 24 393 04, 24 393 02, 15 393 01-S, 15 393 01, KH-24-393-16-S, KH-24-393-16, KH-24-393-04-S, KH-24-393-04, KH-24-393-02, KH-15-393-01-S, KH-15-393-01

Compatible with John D LG808656 M138498 M145667, Compatible with Honda 16700-Z0J-003, Ryobi 308459007, Kawasaki 49040-7001 49040-2075