Best Grote Molen in 2026

Grote

Grote

Grote

Surface mount 3 diode Red light with reflex.Material:Acrylic and ABS

Snap-On, replaceable lens

Hardwired with lead and ground

Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen bright light to safe your night. Work perfectly for 100, 000 hours lifetime.

Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while yellow for positive.

Maximum Durability: Waterproof PC lens, rubber cover sealed light and potting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever.

Fit Type: Universal Fit

Package Dimensions: 7.6 L X 11.2 H X 7.8 W (Centimeters)

Included Components: 1 Pair Of Side Marker Lights - Amber

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

【Compatible】The front bumper park signal side marker lights compatible with 2011-2015 Chevy Cruze, 2016 Chevy Cruze Limited.

【High Quality】The side mirror light adopts a sealed design, waterproof IP65, scratch-resistant, long-term exposure does not fade, can adapt to all kinds of extreme weather, rain or car wash water will not penetrate it.

【Replaces OE】42334144 42334145 GM2550198C GM2551198C 95186926 95186927 GM2550198 GM2551198 REPC104506 REPC104505 335-1419L-AC(CAPA) 335-1419L-AF(NSF) 18-6094-00-1(NSF) 18-6094-00-9(CAPA)

3 red LEDs, grommet and connector included

Completely resin sealed electronics

High impact acrylic lens and housing

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

OE-comparable harness with no pigtail connector for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service, quality and durability

Parking / Side Marke

Compatible with 2008-2017 Mitsubishi Lancer includes Evolution X, 2011-up Mitsubishi Outlander Sport, 2014-up Mitsubishi Mirage

Please note that not all Mitsu has side marker lamps, please make sure yours come with OEM side markers in order to use this product!

Includes one pair (driver and passenger sides) dark smoked lens amber LED front fender side marker lamps with sequential flash turn signal feature (Replace OEM part# 26160-8990A)

Fitment : 1997 1996 1995 1994 1993 97 96 95 94 93 Ranger

Features : Front Amber Lens Corner Lamp , Turn Signal Light , Parking Light , Side Marker , Driver Left Side , Light Bulb Excluded

Fits OEM Part Number : F37Z 13201 A , F37Z13201A ; Fits Partslink Number : FO2520118

Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design

DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Brand: TMH with 1 Year Premium Warranty

Pack of 50 pcs : 3/4 inch Amber Light + Amber Lens Round Bullet Miniature side marker

Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifetime

12V,universal design for all cars, SUV, pickup,truck,trailer,boat etc.

3 LED lens inside of the lamp offer extreme bright light. SAE P2 PC,DOT. Waterproof Lens,sealed Light

It can be used as clearance Lamps, side marker or identification light,Trailer Light etc. 3 colors of light for your choice: amber,white,red.

Brand : TMH ( Pack of 20 )

Pack of 20 : 3/4" Amber Light + Amber Lens Round Bullet Miniature side marker LED Clearence Light Front Rear Side Marker Indicators Light for Truck Car Bus Trailer Van Caravan Boat

12v DC : Black wire is positive and White wire is negative

Partsam (2 x Red) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens housing with white base. Surface mount. 2-Wire design

DOT Approved. Function as front / rear clearance lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Superior brightness: Each light is equipped with 6PCS high-intensity 2835 SMD LED, stable output of 120LM light for perfect marker light.

Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire leads add strong glue to completely seal them without affecting the surface installation.

Easy installation: 2 wire connection, red, yellow and white for positive, black for negative. 3 steps to install: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

Exact fit to OEM#: 33850-TBA-A02 and Partslink#: HO2550127

DOT Certified (Passed stringent quality standards)

Assembly includes bulbs, lens, housing, and socket

oe-comparable harness (no pigtail connector) for hassle-free installation

oe-comparable mounting provisions ensure drop-in precise fitment

rigorous and accelerated cycling tests to ensure product service quality and durability

Brand : TMH ( Pack of 10 )

Fit for 3/4 inch Surface Mount Bullet Button Side Led Marker : Easy to install

Made from 304 Stainless Steel : No Rust & Heavy Duty in all Weather Condition

The products listed are aftermarket spare parts, and any reference to the names of the auto makers and vehicle models are solely for the purchasers to identify the applicable scope of such spare parts and are in no means used as trademarks

Compliant to applicable DOT regulations

Test fitted to ensure proper fitment

OE-comparable harness (no pigtail connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

【Premium Quality】 Designed with 10 super-bright colored LEDs behind colored diffused polycarbonate housing and acrylic lens for improved visibility. 2" x 4" Mini trailer clearance lights are likely intended for use on trailers, to increase visibility and safety while driving.

【Wide Application】 The Trailer Side Marker Light Indicator light can work as side marker lights, led clearance marker lights, rv yellow marker lights, clearance lamps and indentification lamps, trailer lights, and truck clearance lights etc. Ultra bright but energy-efficient, provides reliable visibility and safety even in inclement weather. Ideal for most 12V heavy trucks like RV, Trailers, Campers, Peterbilt, Freightiner, Kenworth etc., can improve safety give your car a new look.

【Super Brightness】 Each 2x4 led marker light come with 10 super bright LEDs provide maximum visibility and safety. The light lens uses a reflecting mirror principle, which can result in better lighting and increased durability. With snap-on reflector lenses make them more functional during use.

Partsam (2xRed) 4inch Rectangle Side Turn Marker Trailer Lights - 10 Diodes

Used as Led Marker Clearance light, Auto side Lamp, clearance light, identification light, trailer Light etc.

Universal for 12V vehicles like Pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc.

Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LEDs, outputs excellent bright 120LM light for perfect marker light.

Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount.

Simple Installation: 2 wire connection, yellow for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

OE-comparable harness (no "pigtail" connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

Partsam (Pack4) Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber

Features 2-wire, hard-wired design; The two-wire design includes the lead and ground wires to mount to any surface(Black is Ground and Yellow is Positive); Easy to install, has mounting bolt centered on the back.

Perfect replacement for trailer side marker; 2-4/5" L x 2" W x 1-1/8" D; Reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs