Best Kunhewuhua in 2026

【Body Material】The "HK-12" torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability.

【Cutting Speed】150-800mm/min, the speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting.

【High-temp working】It adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions.

Tips feature quick disconnect couplings and color coded o-rings for gas identification.

Kit includes AR-B regulator, G-4 handle, AH-12 hose, A-3 tip, A-11 tip.

Solders up to 3-Inch

Welding & Soldering Equipment & Supplies

Made In America

Commercial Brand: Turbotorch

It welds up to 1/8" or 3" with optional nozzles

Uses propane/natural gas as fuel

Features medium duty construction

WH270FC-V Torch Handle with Built-in Check Valves

CA270-V Cutting Attachment

1-3-101 Cutting Tip

OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation; Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency

EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions; Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly; Move the torch tip slowly along the line of your cut until the metal has fully parted

CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding; To create a neutral flame, you must find the correct relationship of oxygen to acetylene; After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch; Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch

Die Forged Brass Medium Duty Torch Compatible with Victor Series 100 Torches

Uses Series "3" Cutting Tips (Small Tips) and comptible with Victor Series 100 Welding and Heating Tips.

Included Size "2" Acetylene or Propane Tip. Can Cut up to 1" (Thicker or Thinner cuts can be achieved with additional number tips - See table in picture Nº: 5)

Die Forged Brass Medium Duty Torch Replacement for Victor Series 100 Torches

Uses Series "3" Cutting Tips (Small Tips) and comptible with Victor Series 100 Welding and Heating Tips.

Included Size "0" Acetylene or Propane Tip. Can Cut up to 1" (Thicker or Thinner cuts can be achieved with additional number tips - See table in picture Nº: 5)

***READ THIS BEFORE YOU BUY*** Please check all the pictures of this listing and make sure the torch connections will fit your existing hoses. Assembled Handle + Cutting Attachment Total Length: 18.5" - Total Weight with Cutting Tip: 3 Lb - 6Oz

***READ THIS BEFORE YOU BUY*** This torch uses Series 1-101 Acetylene Cutting Tips and 1-GPN Propane Cutting Tips Compatible with Victor. These are the large tips. Check the tips dimensions in the pictures.

Die Forged Brass Heavy Duty Torch Replacement for Victor Series 300 Torches

Fuel: Acetylene

Cutting Attachment: CC509P

Torch Handle: CW5A

General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc

Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming

Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene; Waterproof storage compartment

Victor G150 Series Portable Tote, Cuts up to 3, Welds up to 1¼ and Cuts up to 5, No tanks included

【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work .

【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options; Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using

【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it .

Light/Medium Duty Tote A Torch Cutting and Welding Kit Outfit

Cuts up to 5mm (0.20") and welds 1.98mm (5/64") right out of the box

Ideal for general maintenance light duty fusion welding, braze welding, hand cutting applications and HVAC

Heavy Duty Handle and Attachment Kit

Uses Victor 1 Series Tips

** No Torch Hose Included **

READ THIS BEFORE YOU BUY: ***This Torch handle fits ONLY Series W-J Acetylene Tips Compatible with Victor - Series W or W-1 Tips WILL NOT FIT THIS TORCH***

READ THIS BEFORE YOU BUY: ***This Torch Handle has 3/8"-24 (Type "A") Hose Fittings - Twin Hoses with 9/16"-18 (Type "B") Hose Fittings WILL NOT FIT THIS TORCH***

READ THIS BEFORE YOU BUY: ***Please note that this outfit WILL NOT FIT disposable oxygen and fuel gas canisters. It will ONLY fit model MC Acetylene tanks with CGA-200 Valves, (Check Pictures) and Industrial Oxygen Tanks with CGA-540 Valves"

Sold on Amazon

Leading Manufacturer Of High-Quality Products

International Renown For Our Diverse Range Of Award-Winning Products

Fully Equipped With State-Of-The-Art Technology

Oxygen Regulator: 250-Series (87090)

Acetylene Regulator: 250-Series (87091)

Torch Handle: 100-Series (87093)

【Body Material】The "HK-12" torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability.

【Cutting Speed】150-800mm/min, the speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting.

【High-temp working】It adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions.

General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc

Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming

Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene; Waterproof storage compartment

This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner.

Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips.

Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders.

🔥【OXY ACETYLENE TORCH KIT】New tote design features an ergonomic carrying handle, built-in storage case and a functional balanced design

🔥【Outstanding Performance】Outfit is designed for Medium Duty cutting, brazing and hvac jobs

🔥【EASY TO USE】 Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.

🔥【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation; Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency

🔥【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B;Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders.

🔥【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions; Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly; Move the torch tip slowly along the line of your cut until the metal has fully parted

Victor style medium to heavy-duty gas welding and cutting outfit with 450 style regulators

Standard accessories weld up to 3/16-Inch (47 mm) and cut up to 6-Inch (152 cm) with the proper tip

Check valves provided for added operator safety from reverse gas flow conditions

Regulators: Flame Tech FTPTK-18 Portable Torch Kit includes light-duty acetylene and oxygen regulators with an outlet and inlet connection, displays for delivery pressure and cylinder pressure, and a pressure adjusting screw

Medium-Duty Torch Handle: The oxygen control valve, fuel control valve, and other crucial parts attached to the medium-duty torch handle enable smooth cutting and welding operations. The oxy-acetylene torch kit does not include cylinders

Cutting Attachment: The medium-duty cutting attachment with our welding kit has a high-pressure cutting oxygen lever. The cutting tip has the capability to cut up to ½” of any material

Victor style heavy-duty gas welding, cutting and heating outfit with 450 style regulators

Deluxe accessories, weld up to-1/2-Inch (127 mm), cut up to 8-Inch (203 cm) and heat with the proper tip

Check valves provided for added operator safety from reverse gas flow conditions

RUGGED BODY: This torch track gas cutter machine is made of high quality aluminum alloy, precision craft, great walking stability, and is a portable and lightweight as an ideal portable machine. This track gas cutting can work with acetylene(Note: the machine could also be fitted with a CO3 cutting nozzle for propane gas cutting), and the user can replace the cutting tips as required. （PLEASE NOTE: Do not open the oxygen valve too large, and work with the industrial pressure gauge.）

TECH PARAMETERS: Thickness of steel plate cutting: 8-100mm; Regulating range: 50-750mm/min(stepless speed regulating); Diameter of circumference for cutting: Φ220-Φ2000mm; Input voltage: AC 110V 50HZ.

EASY to USE: The CG1-30 track torch gas pipe cutting come with three of 70cm tracks. Besides, the guide rails provide interface ends for the extended track. The user can according to your needs to connect the guide rail. This machine comes with a detailed manual and you can refer to it when using this product.

Easy to control, check, clean and repair.

Meet the requirements of welding process, no influence on the flame temperature, gas flow, etc.

Built-in check valve prevents the reverse of gas.