Best Kuntec in 2026

Function: Brake caliper compression tool is for brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.

Application: This disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models

Quality: Brake caliper tool is made of carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops

5 different pieces pickle fork tool set that are universal for cars and light trucks; All forks are threaded to be interchangeable with either handle

Pickle Fork Tool is used to separate pitman arms, tie rods, and ball joints on your vehicle

8 inch Handle for use with a regular hammer Handle with 0.401 inch Shank for use with an aim impact hammer

Compress coil springs to repair or replace MacPherson struts, shock absorbers and spring sets

Built-in detent safety pins and broad spring contact securely locks into place for protection

Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut

The ball joint press set with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle

Ball joint press removal tool is constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.

Ball joint remover is compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints

Wheel Bearing Tool Set is used for the removal and installation of front hub bearings, reduces the damage done to the hub and bearings

These wheel bearing press kit replaces wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle

Package include 1 xSteel Drifts: 38mm; 2 xDrift: 86mm, 91mm; 1 xReceiver Sleeve: 76mm; 3 xHub Screw: M12 x 1.5 mm; 3 xHub Screw: M14 x 1.5 mm; 9 xAdapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm

Torsion bar unloading tool is designed to remove and replace your vehicle’s torsion bar; it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition

Torsion key tool is made for use on trucks with heavy duty chassis and a larger torsion bar.Tip: Grease the threads before using and get the front tires completely off the ground

This torsion bar tool is built with heavy-duty forged steel and larger 7/8” diameter anvil casting threads; Large C-frame opening to accommodate beefier torsion bars

Function: This valve spring compressor C clamp tool set is used to easily and safely install and remove valve springs, suitable for motorcycle, ATV, UTV, car, and other small engine vehicles and equipment

Adapters: Valve spring compressor set includes 5 adaptors: 16mm, 19mm, 23mm, 25mm & 30mm; suitable for a wide range of vehicles

Size: All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings

This fender roller is designed to slowly ease the wheel arch away allowing for larger wheels to be fitted.

PVC roller moves back and forth on the fender to make it flat and removing the roller by the handle, you can adjust and control angle and length

This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 15.2" to 20.1".

This Fuel Pump and Vacuum Tester is to test of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems

The Fuel Pressure & Vacuum Gauge includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)

Pressure gauge has a 3-1/2" diameter with color-coded measurement scales so it is easy to read

Bushing driver tool set allows you to build your own custom bushing driver. Choose the required size and assemble your drive tool.

This bearing and seal driver set can remove or install bushings that are flush with the housing, ideal for removing seal, bush or bearing job. All 50 pieces are interchangeable with each other so you get 2450 different size variations

The discs goes from 18mm (25/32") all the way to 65mm (2-9/16") in 1mm increments plus (2-29/32") 74mm. All discs are connected with a 12mm shaft and screw which quickly connects to a 180mm 7-1/2" handle

Ball Joint Separator is designed to remove most popular types of pitman arms, tie rods, and ball joints on most vehicles.

Package includes: 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x storage case

Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth

Package includes: 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x storage case

Ball Joint Separator is designed to remove most popular types of pitman arms, tie rods, and ball joints on most vehicles

The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks

Professional Hose Clamp Pliers Set has everything you need to take apart an engine and works great for tight areas angles come in handy. Long reach hose clamp plier with wire flexible wire shaft. For the removal and locking of clamps into open position

The long-reach hose clamp pliers with a flexible wire allows access to hard-to-reach areas and awkward angles, and the swivel jaws allow access hose clamps in any position

Pliers feature a ratchet locking mechanism that holds the clamp in the open position which saves your fingers from accidents and injuries

This brake caliper tool set includes a holder, left and right thrust bolt assemblies, and 15 adapters to fit hundreds of domestic and import vehicle makes and models to meet your different needs

For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle

The T-Handle tool has a thrust bolt and reaction plate to easily push the piston back into the caliper without causing any damage and is the right tool for any mechanic working on brakes

Quickly removes the CV joint from the drive shaft without damaging the joint and keeps hands free for releasing retaining circlip

CV joint removal tool includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars

CV joint puller reduces the risk of damaging the joint, transmission, or other parts

R8 Collet Set is to cut keyways, hold double end mills, and more

13 size collets: 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, 1/2-inch, 9/16-inch, 5/8-inch, 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch

Each of the collets has an internal thread to allow you to tighten into the mill

1/2 HP Electric Centrifugal Clear Water Pump features: 1/2 HP,110 volt

Clear water operation Capacity: 10 Gallons per minute. Maximum Suction Lift: Up to 20ft Pump inlet and outlet: 1". Dynamic Head: Up to 115ft

With a pre-filter, for drawing water from ponds, streams, rain-butts, rain-water cisterns and wells

Oxygen Sensor Remover is ideal for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines

3 different types of sockets cover various situations of oxygen sensor locations,2 chasers are for cleaning and repairing damaged threads

6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached

Precision clamp on end of flexible cable allows for extended reach where other models cannot reach

With locking mechanism to hold clamp in the open position, freeing up your hands and making your job easier and faster

Access the flat-type hose clamps located in hard-to-access areas easily, makes removal and installation of clamp much easier.and installation of clamp much easier.

Function: This fuel pressure tester diagnoses variability problems caused by poor fuel pressure. Used to check if fuel pump is defective or inconsistent in pressure flow

Universal Design: Adapters, hoses and fittings cover all fuel injection systems and most cars and trucks. (Does not compatible with Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles. )

Pressure Gauge: Dual scale range 0-140psi (0-10 bar); easy to read and provide you more precise and accurate readings

Function: Crows foot wrench set includes 15 sized metric crowfoot flare nut wrenches for use with 3/8" and 1/2" drive ratchet, extension, or torque

Easy to use: Fits into restricted and hard-to-reach spots where a regular wrench or socket won't reach

Package content: Crowfoot wrench set includes (15) crowfoot wrenches – 3/8-inch drive 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm; 1/2-inch drive 21mm, 22mm, 24mm

Type: Manual Fluid Evacuator; Capacity: 9ltr; Fluid temperature range : 35°F- 200°F

With this oil extractor pump, you no longer have to lift up or crawl under the car to do fluid changing. Simply draining engine oil or transmission fluid directly through the dipstick tubes.

Vacuum Fluid Extractor comes with 4 kinds of tubes (Ø6, Ø8, Ø10,and 1pc of Ø4 brass probe, probe length 1M) with different diameter go into the bottom of oil pan.

This Blind Inner Bearing Puller is ideal for removing tightly jammed axles, wheeling bearings, and bushings. It will not damage parts in using, perfect for professional and DIY use

This bearing slide hammer kit fits for bicycles, motorcycles, most compact cars, mid-size cars and light pickup trucks 8-58mm bore bearing.Includes various sizes and types of collets, blind, Internal, bearing puller, with wide application

The blind hole bearing puller set has the best performance of high hardness and high toughness, durable and stable. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using

This torsion bar unloading tool is designed to hold the torsion bar while you make adjustments to your vehicle

The torsion key tool includes a new special adapter for universal use, such as compatible for FORD/DODGE

The torsion bar tool is built with heavy-duty forged steel and larger 7/8” diameter anvil casting threads, made for use on trucks with heavy duty chassis and a larger torsion bar

CV boot clamp pliers is to quickly and easily tighten, secure, and even crimp a CV boot banding strap

CV boot clamp piler set allows you to tighten and cut a band with the built-in cutter and winding mechanism

Use with any banding up to 2/5-inch (10mm) in width; Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses

This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm)

The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting

Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable

Argon / CO2 regulator and flow meter has CGA580 Inlet Connection, will screw right into the Argon, Argon/CO2Tanks, Idea choice for MIG TIG welding, chemical and electronics industry

Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting- 1/4" Hose Barb Adapter Included

The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi

FUNCTION: The fuel pressure test kit can quickly indicate if fuel pump is defective or inconsistent in pressure flow and set to your motor / car

APPLICATION: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles)

EASILY USE AND SAFETY: Easy to install and get the pressure readout. The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use

Piston ring compressor set for compressing piston rings for cylinder installation

Piston ring compressor tool can be tightened to fit any pistion from 2-7/8" (73mm) to 4-3/8" (111mm) in diameter

Band sizes : 2-7/8-Inch thru 3-1/8-Inch , 3-1/8-Inch thru 3-3/8-Inch, 3-3/8-Inch thru 3-5/8-Inch, 3-5/8-Inch thru 3-7/8-Inch, 3-7/8-Inch thru 4-1/8-Inch and 4-1/8-Inch thru 4-3/8-Inch

A complete bearing puller set for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles. Includes an extra 2-jaw puller (L-leg puller) for working with gears, pulleys, and fly-wheels

Bearing separator set comes with 2” & 3” bar-type bearing splitters and 4” & 5” long hex push-puller legs, giving the user options to deal with various pulling jobs

Made of drop forged and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool