Best Lexar Industrial in 2026

Outside Diameter: 1-3/4

Assembled Length of Set: 2-1/8

Outside Diameter: 1-3/4

Assembled Length of Set: 2-1/8

Outside Diameter: 2-1/8

Assembled Length of Set: 2-1/2

Ratio: 50:1

Input Shaft Diameter: 5/8

Output Shaft Diameter: 1

Ratio: 100:1

Input Shaft Diameter: 5/8

Output Shaft Diameter: 1

Ratio: 20:1

Input Shaft Diameter: 5/8

Output Shaft Diameter: 1-1/8

Key Size: 3/32

Length: 2

Key Type: Short Arm

Outside Diameter: 2-1/8

Assembled Length of Set: 2-1/2

Thread Size: 3/8-32

Thickness: 3/32

Finish: Zinc

Complete Output Shaft Kit for 050 Series Reducers

Complete Output Shaft Kit for 050 Series Reducers

Ratio: 50:1

Input Shaft Diameter: 5/8

Output Shaft Diameter: 1

Key Size: 9/64

Length: 2-7/16

Key Type: Short Arm

Key Size: 5/32

Length: 2-9/16

Key Type: Short Arm

SOLAR Y BRANCH CONNECTORS - 1 male to 2 female(M/FF) and 1 female to 2 male(F/MM), it is compatible with solar cables or connectors in 14AWG to 10AWG, it could be used for paralleling solar panels.

WATERPROOF AND DURABLE - An IP67 waterproof ring on the male connector is perfect to seal out water and dust to prevent corrosion. The connector is stable and safe with the built-in lock which is durable in outdoors environment.

HIGH SECURITY - The connector is certified by TÜV, made with PPO material, the contact is made with Copper, silver plated. Good material makes sure that it can keep working stably in the temperature range from -40℉ to 190℉.

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping

Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,

May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping

Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,

May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors

3/8-inches flare fitting has an outside diameter of 5/8-inches in order to accommodate the flare seat,The Maximum 95, 000BTU per hour, low pressure propane regulator with 2feet/24inch Low Pressure LPG hose for propane gill and fire pit table, strong hose will last for a long time

Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold , Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner, Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C , most of Kenmore gas grill and most of Brinkmann gas grill.

Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator.

Powerful Drainage System: Our shower drain with enhanced V-shaped slope, 36 L/min high flow capability(without filter mesh), 18L/min high flow capacity(with filter mesh). 12" length, 3" width, 2" central outlet, fit standard U.S. plumbing connection and certified by CUPC.

A Good Hair Strainer Helper: Our shower drain strainer can easily collect shedding hairs when wash your heads, filter hair and particulate impurities effectively, avoid the blocking of bathroom floor drain.

Easy Adjustment & Installation: Adjustable feet support the channel body during installation, can solve the installation problem effectively caused by the unevenness of the ground. The square shower drain is made of high quality 304 stainless steel.

Package Include: 1/2in X 150 FT Soaker Hose(with solid brass connectors) Clamps *4 3/4" plastic garden hose Shut off valve * 1 3/4" male hose end adapter * 3 3/4" Washer * 2 5/8" end cap * 4 5/8" Tee * 8 5/8" Coupling * 4 5/8" Elbow * 4 7.5" hose fixing stakes * 20 zip tie *20

How to Use: 1. Place the soaker hose near the root of the soil surface,which can stably transport water to your plants. 2.By covering the hose,it prevents them from becoming an eyeshot in the garden, it also prevents tripping,and helps retain the moisture provided by the hose.

Material Saving: 100 feet of garden hose can be cut into various lengths such as 75 feet, 50 feet, 25 feet, etc. as needed, simply with the included free accessories

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures.

These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines.

The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.

【Versatile Converter】 Just attach 3/8" male flare fittings at both ends to convert them into any fitting form you require, allowing you to connect multiple devices such as a gas grill, propane burner, and so on.

【Extension Hose】 The 20-foot length is enough to maintain a safe distance between your propane appliance and the fuel tank. Also, you can use your grill more flexibly.

【Premium Solid Brass】 Corrosion-resistant brass fittings provide a good seal against leaking hose ends. Ensures your safety in use.

Outside Diameter: 1-3/4

Assembled Length of Set: 2-1/8

Outside Diameter: 1-3/4

Assembled Length of Set: 2-1/8

PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs

Compatible with cast iron, plastic, Copper, or schedule 40 steel piping

May be used for non-pressure drain, waste, and vent (dev. ) piping systems and sewer systems indoors and outdoors

Connector for use with 1/2" and 5/8" Drip irrigation tubing

Barbed ends grab tubing for a secure leak-proof connection

Allows creation of a custom layout for your planting area.

Max water flow rate of our drip emitters is 25 gallons-per-hour, suitable for lawn, garden, flower beds, vegetable gardens, herbs gardens, etc. Especially for large garden.

Spray diameter from 0 to 10 feet. Flexible adjustable water flow while using, no matter you want it larger, smaller, or turn off. Our drip emitters can achieve what you need.

These drip emitters are ONLY suitable for 1/4 inch irrigation tube with 4mm inner diameter, also can be inserted to a 1/2 inch or larger irrigation tube directly. Make sure soak the end of hose by hot water before connecting.

SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and precisely water up to twenty individual plants; Use the kit to build, expand, or repair a drip irrigation system

INSTALL IN 3 EASY STEPS: 1) Connect timer and tubing to water source; 2) Lay out tubing; 3) Use fittings to attach drippers; Customizable system for your garden's potted plants, hanging baskets, or planter beds

IDEAL FOR ANY LEVEL GARDENER: Easy to customize, install, and operate; Kits contain all the components you need to set up your own drip system; schedule timer for worry-free watering

Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling

Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs)

High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life.

IMPORTANT SIZE INFO: flexible coupling's inner diameter is 1.3 inches and connects with the pipe's outer diameter of 1.3 inches so the pipe nominal size is the 1-inch industry standard

COMPATIBLE WITH MULTIPLE PIPING SYSTEM: flexible coupling connects DWV (drain-waste-vent) piping, cast iron, plastic, copper, or schedule 40 steel pipe

FOLLOW THE MARKINGS: each rubber fitting is marked with part number, size, and certification