Best Planger in 2026

EASY TO USE - The Power Pad flat is perfectly suitable for various car bodies and jacks (e.g. Unitec, Michelin etc.) The application is quick, uncomplicated, slip-proof and accurate!

REAL QUALITY - Due to our special rubber compound, you will enjoy our product for years. Choose premium protection.

PRODUCT PROPERTIES - Material: Very robust NR/SBR rubber (80 Shore A) // Dimensions: Diameter top = 65mm , Diameter bottom (attachment for jack) = 38mm, // Suitable for cars up to 3.5T. // IMPORTANT: Before buying, check the dimensions of your car and jack and compare them with the dimensions in picture 4.

Extended height, lightweight, steel jack stands; Sold in pairs

Lift range of 14" to 20-1/2" allows for higher clearance lite duty vehicles such as jeeps, SUV's, and UTV's

Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 8-9/16" by 7-3/16"

Product 1: Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Product 1: Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Product 1: Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Product 1: Easily converted from creeper to seat for your maintenance convenience

Product 1: Thick padded cushions create a comfortable base for easy access and movement during your maintenance tasks

Product 1: 6 swivel casters for easy maneuverability. Vinyl padded seat and headrest

Product 1: Sturdy stamped Steel Construction with 6 ton capacity

Product 1: High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Product 1: Double locks mechanism with both handle locks and mobility pin

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

Double locking jack stands are used to support your vehicle after lifting with a jack.; Features a large saddle surface area for better contact with the load being supported

Constructed of high-grade forged steel with a welded frame design for durability; Handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Adjustable lifting height range from 11-5/16" to 16-7/8" with a 3 ton (6,000 lb) load capacity

The Hi-Lift Handle-Keeper holds the Hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from durable, transportation grade rubber

Easily slips onto Jack handle and is secured with integrated strap

Fits models:Compatible with135 335 535 E82 E88 E46 E90 E91 E92 E93 E38 E39 E60 E61 E63 E64 E65 E66 E70 E71 E89 X5 X6 X3 1M M3 M5 M6 F01 F02 F30 F10.

Material:Made of solid billet aluminum by CNC and anodized black.

Use:Use this factory Jack Pad to lift up your car more safely.It is safe to lift your car from factory jack points.

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported. Saddle Diameter:3.35 inch

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Product 1: [QUALITY]: Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze.

Product 1: [CONVENIENT]: Anti splash curled lip edge prevents any splashing that can occur while moving the pan.

Product 1: [SIZE]: Deep 5" x 12.55" pan can hold a high capacity up to two gallons/8 liters making it the perfect oil pan for oil changes.

Lightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Constructed of high-grade aluminum; Removable locking support pins provide added security and stability and is equipped with 6 locking positions

Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Alleviates jack sinkage on soft surfaces

Serrated teeth along one side helps scrape or level ground for base

Drilled hole in center of base for convenient storage on jack bar

Pro-Lift PL3300 is 3 Ton jack stands that are designed to support your vehicle after lifting with a floor jack. It features a wide pyramid foot base to provide added strength and stable support.

Constructed with sturdy stamped Steel with a welded frame design for durability. With the lifting range from 11-1/4 inches to 16-3/4 inches, it gives you the ability to handle a wide range of vehicles including small cars, jeeps, SUVs, and more.

The ratchet bar is built with high quality cast ductile iron with multiple positions. Its sawtooth design allows for quick height adjustments that lock into place. Height adjustment mechanism allows smooth upward movement while releasing handle locks and mobility pin.

Supports up to 8,000 lbs. of trailer tongue weight

Designed to weld directly to the trailer frame

Side-wind handle easily raises or lowers trailer coupler

A SIMPLY BETTER RV JACK PAD - Lightweight, easy to set up, will never break or splinter, supports all RV jacks from sinking or damaging paved surfaces.

MADE IN USA - Unbreakable, supports up to 50,000 lbs, 100 percent waterproof, can be stacked for additional height. An order quantity of 1 equals 1 pad. To receive 4 pads, please add 4 to your cart.

PROVIDES BETTER PERFORMANCE - In softer conditions, excellent support and stabilizer for heavy RVs.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Fitment : All model cars,please check the size before purchase.

This jack pad is to fit the weld on most uni-body vehicles so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel.

There are 2 magnets so that the supreme holding strength while placing jack and lifting vehicle.

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

1,100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation

Widen deck (wide 9'') with safe rubber surface to prevent slippage and scratching

Solid & Sturdy steel construction with a red paint finish

Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically

Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

Heavy-duty jack stands are used to support your vehicle after lifting with a jack

Constructed of high-grade forged steel with a welded frame design for durability

Handles a wide range of vehicles and equipment, including agricultural and industrial applications

Double locking jack stands that are sold as a pair; Height ranges from 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) capacity each

Equipped with a double-lock protection feature, increasing safety by 200%

Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 10-13/16" by 9-7/16"

Item may ship in more than one box and may arrive separately

Four leg steel base and support tube made of heavy schedule pipe foradded strength and stability

Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy.Number of Height Adjustments:6

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Minimum height 13.2 in.

Maximum height is 21.5 in.

Sold individually

COMPATIBLE WITH MOST HI-LIFT JACKS:Designed and Used for most of Hi-Lift jacks, Includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not fit for POST POPPER Jack

ALLEVIATE JACK SINKAGE ON SOFT GROUND: Used on soft ground like sand, mud, grass. Give the Off-Road Base better footing and greater stability during the lifting process

HEAVY DUTY AND EASY TO CARRY: Made of a tough PP synthetic material, better more than a chunk of wood will not rot or break. A drilled hole in center of base attached to your jack bar, store it easy

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease

LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches

360 DEGREE ROTATING SADDLE allows for easier movement

Four leg steel base

Made of heavy schedule pipe for added strength and stability

Quick and easy height adjustment.Base Length:38.27 inch