Best Tealover in 2026

Acetylene Cutting Torch Tips for Victor Type Torch

1-101 Series 000 size

2 pieces of cutting tips in 1 package

Perfect match:Perfect match WELLER ST7，OD 1/4" (6.3mm), ID 1/6" (2.9mm),Multiple models can be adapted to different welding spot

High quality material:Precision ground copper tips are plated with iron, nickel and chromium .Tinned with Lead Free alloy,make better heat transfer performance, good ability to hang tin, lifetime is no less than 50,000 welding spots, good replacement tips for Weller ST7 tips.

Wide Compatible:Compatible with WP25, WP30, WP35, WLC100 SP40L / SP40N series soldering iron.

This product is made from high quality materials, and it is designed for lasting performance

Use Hakko for all of your hobby soldering needs and experience the difference

This is for use with FX-8801/907/900M/913

MIG Contact tips

.030-Inch

Package of 5

Wide Compatible：weller wes50 wes51 wesd51 we1010na wcc100 solder stations, pes51 pes50 wcc101 LR21 soldering irons

Perfect match：Perfect match WELLER ET Soldering Iron，Multiple models can be adapted to different welding spot

High quality material：Precision ground copper tips are plated with iron, nickel and chromium .Tinned with Lead Free alloy

Ergonomically designed handle

Designed with the same swirl combustion technology that is featured in the Proline Self Lighting Series

Manual series offers an economical alternative for use with Propane and MAP-Pro gases

Soldering Gun Tips 7135W

For Models: 8200

Soldering tips

Package Height: 2.54cm

fits 8200 and 9200 solder guns

Package Height: 2.54"

Weller MTG21 Replacement Soldering Tip

Fit WLC200 SPG80 SP80NUS SPG80L Solder Station Iron Tips

1 conical + 1 bevel + 1 screwdriver (Total 3 Pieces)

HAKKO 900M Replacement Soldering tip, solder iron tip, Handle Tip, Solder Bit, Pencil Tip (Not HAKKO maker but brand " AiCE Tls)

Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects

We only produce good quality tips, temperature recovery fast, not easily oxidized, we will full payment refund if you are not satisfied even after use.

IMPROVING 3D PRINTING PROJECTS: Using 3D printers lets you create amazing projects. Innovative 3D printing tools like Virtjoule Heat-Set Insert Tips allow you to set threaded brass inserts into plastic to increase the strength of your part and also help you assemble and disassemble projects multiple times. These soldering tips, compatible with Hakko FX-888D and Weller SP40NKUS solder irons, make the job easy. With their square shoulder and slick finish, inserts won't stick on the tool and pull out.

OPTIMIZED SLIM PROFILE DESIGN: We originally created these long-shank tips to be compatible with the Hakko FX-888D iron. This design allows you to reach deeper into 3D-printer parts and tight corners without touching the side of your 3D-printed or injection molded part. The hot iron heats the tip and the brass insert, allowing it to melt into the piece. When set, the iron pulls out cleanly without sticking. A normal conical shape tip will often stick to the insert and pull it back out, ruining the project.

ONE SET, DIFFERENT TIP SIZES: Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards. Our meticulously crafted soldering tips are smooth, and the edges are perfectly rounded, making a very slick slip between the tip and a brass insert.

Original Tip Replacement for TS101 and TS100 Mini Soldering Iron Kit

length : 105mm / Weight : 10.5g

Package included ONE Tip only, but there are 7 size of tips you can choose

Original Tip Replacement for TS101 and TS100 Mini Soldering Iron Kit

length : 105mm / Weight : 10.5g

Package included ONE Tip only, but there are 7 size of tips you can choose

Re-tins oxidized soldering iron tips and increases tip life

Doesn't contain lead or di-ammonium phosphate

Lead-free compound insures this item can be used on all soldering tips

IMPROVING 3D PRINTING PROJECTS: Using 3D printers lets you create amazing projects. Innovative 3D printing tools like Virtjoule Heat-Set Insert Tips allow you to set threaded brass inserts into plastic to increase the strength of your part and also help you assemble and disassemble projects multiple times. These soldering tips, compatible with Hakko FX-888D and Weller SP40NKUS solder irons, make the job easy. With their square shoulder and slick finish, inserts won't stick on the tool and pull out.

OPTIMIZED SLIM PROFILE DESIGN: We originally created these long-shank tips to be compatible with the Hakko FX-888D iron. This design allows you to reach deeper into 3D-printer parts and tight corners without touching the side of your 3D-printed or injection molded part. The hot iron heats the tip and the brass insert, allowing it to melt into the piece. When set, the iron pulls out cleanly without sticking. A normal conical shape tip will often stick to the insert and pull it back out, ruining the project.

M3 THREADED INSERT PACK: Each Virtjoule Heat Set Insert Tip for M3 has 30 threaded inserts for the M3 tip. M3 is a popular size for Arduino circuit board hole mounts. Not all M3 inserts you may find have the same outer diameter. So check your design with the inserts you have.

[PREMIUM QUALITY]: Brand New & High-Quality Copper aftermarket consumable parts. Strict quality control standards to Build and test. Not OEM but quality exceeds OEM requirements. Pretty easy to snap into place. Perfect match and Good Choice for Direct replacement of original parts.

[SIZE]: 20Pcs Contact Tips 11-23 0.023", 2Pcsgas nozzles 21-50 1/2", 2Pcs gas diffusers 35-50.

[COMPATIBLE]: Replacement for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns. The most prominent is the nozzle. It holds the end of the contact inside, not out. It's safer and more effective.

Genuine Weller replacement tips for Weller models D550 and D550PK soldering guns

Tip width O/D . 22 in. /5. 59 mm

Reach/length 2. 57 in. /65. 28 mm

MPN: 0-108-16, 1 pound jar/can

16 oz Jar

Non-toxic

Lincoln Tip Contact 350A Tapered .035 (0.9Mm) -1 Pack of 10

Tips feature quick disconnect couplings and color coded o-rings for gas identification.

Kit includes AR-B regulator, G-4 handle, AH-12 hose, A-3 tip, A-11 tip.

Solders up to 3-Inch

High-quality，Each one is electroplated for 72 hours，Advanced production process.not easily oxidized.Replaceable soldering iron tips 900M-T series for soldering station.

Fits Hakko, Radio Shack 64-053, Atten, Quick, Aoyue, Yihua,Vastar,Sywon,Tabiger,SOAIY and Fits ALL of X-Tronic Models, Except for 3010-XTS and other brand iron station,

Such as:900M, 933, 936, 937, 376, 907, 913, 951, 898D, 852D+, 878AD

1/4 inch tip is great for stained glass projects

Even heat distribution for an even bead

Fits Hakko FX-601 Soldering Iron

Country of origin is United States

EFFECTIVE HEAT TRANSFER High quality cooper core delivers effective heat transfer to the solder point

LONGER LIFE Iron and chrome plating extends the service life to the soldering tip.

WELLER GENIUNE TIPS Weller genuine ET tips have a long life, which reduces the total cost of ownership for WE1010 Series Soldering Station. Over time, this soldering station could even pay for itself through decreased costs for tips and maintance.

Active range 1050°F - 1600°F

Model Number: SSWF1

Item Package Dimension: 4.75" L x 4.75" W x 3.38" H

1/8" cone replacement soldering iron tip

Tips are made of solid copper, nickel plated and tinned

Use for model #SP23 soldering iron

T18 Series Soldering Iron Tip, ‘B’ conical shape R0.5 x 22.5mm

This tip shape is an all-round type which can be used from any direction and it is available for any kind of soldering. Therefore it is not only accessible for the soldering beginners but also suitable for the experienced.

Suitable for use with the Hakko FX-8801, FX-8803, FX-8805 Soldering Irons

【A wide range of sizes to choose from】— There are 7pcs heat set insert tip heads of different sizes for heat-set inserts M2 M2.5 M3 M4 M5 M6 M8

【Easy to change the tips】—It is very easy to change the tip heads,no need to take off the whole tip,just screw off the tip head and put on a new one.

【Wide compatibility】—This soldering adaptor is for soldering irons that uses T18 900M ST soldering tips such as FX888D FX600 WLC100 SPG40 SP40NUS Yihua 926 Yihua 939D Ryobi P3100 X-Tronic 3020 series

Soldering tip, conical, 0.2Mm x 22.5Mm

For use with fx-8801

Application soldering

ETS ETL ETKN ETT ETX ETR ETA ETB ETC ETD WELLER ET Replacement Soldering Tip, Solder Iron Tips, Handle Tip, Solder Bit, Pencil Tip

Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects

No Matter for precision electronics but also for Drag Soldering, DIP chips, Narrow Tip for Some Tiny Work, LED and board wiring, Raspberry Pi Zero Projects