Best Powertec Blades in 2026

For fast rip cuts on soft/hardwood thanks to the thin kerf design.

To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood.

0.102 kerf thickness, 0.071 plate thickness, 10° Hook Angle, alternate teeth Grind.

Makes biscuit joining quickly and easily

High-grade German steel and 8 micrograin carbide-tipped teeth guarantee years of use.

Fits Lamello, DeWalt, Skil, Bosch, Freud and other popular biscuit joiner models.

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.

For for fast, smooth, heavy-duty rip cuts on soft/hardwood Good performance on plywood

To be used on radial arm saws, miter saws, table and special saws

Technical details: kerf thickness 0126, plate thickness 0087, 20° hook angle, FTG -Flat Top Grind

For crosscuts, fine finish on two-sided laminates without using scoring blades

Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard

0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

For radial arm saws, miter saws, table & special saws. Cut soft and hardwood, plywood & chipboard.

0.126 kerf + 0.087 plate thickness, 12° hook angle, 4 alternate teeth, 1 trapezoidal tooth Grind

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance.

Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood.

0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind.

For heavy-duty crosscuts, perfect finishing on single-sided laminated panels.

For radial arm saws, miter/table & special saws. Cut chipboard, MDF, laminate, hardwood & plywood.

0.126 kerf thickness, 0.087 plate thickness, 10° hook angle, Trapezoidal tooth Grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

For fast crosscuts on wood and plywood. Good rip cut on wood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.110 kerf thickness, 0.087 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

For crosscuts. Excellent cut with perfect finish on two-sided melamine, wood and plywood.

To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 5° cutting angle, 10° ATB+Shear grind.

For fast extra-clean crosscuts and occasional rip as well on wood and plywood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind.

For fine finish crosscuts. The 5° negative hook limits splintering and "climbing".

Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates.

0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind.

For smooth finish crosscuts. Faster cuts thank to the special ground teeth.

Cuts lumber, plywood, OSB sheets. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.039 plate thickness, 20° hook angle.

Makes biscuit joining quickly and easily

High-grade German steel and 6 micrograin carbide-tipped teeth guarantee years of use.

Fits Virutex and Porter Cable machines.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

To be used on compound miter saws for cutting soft/hardwood, plywood and two-sided laminates.

0.098 kerf thickness, 0.071 plate thickness, 7° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut soft and hardwood, plywood, two-sided laminates. For use on compound miter saws.

0.102 kerf thickness, 0.071 plate thickness, 5° cutting angle, 10° ATB+Shear grind.

For making clean edges, square shoulders & flat bottoms. Splinter-resistant cuts in all wood.

Ideal for underpowered saws.

0.125 kerf thickness, 0.098 plate thickness, -12° hook angle, Flat Tooth + Alternate Tooth.

3-Inch Diameter, 5/8-Inch Bore, suitable for 8-Inch saw blades.

2 stabilizers that virtually eliminates rim vibration to make cleaner, straighter cuts.

They also reduce noise caused by vibrations and extend your saw blade life.

For fine finish crosscuts. The 5° negative hook limits splintering and "climbing".

Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates.

0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind.

For framing/decking & general construction. Faster cuts thanks to the special teeth geometry.

For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 20° hook angle, 10° ATB+Shear grind.

For smooth finish crosscuts. Faster cuts thanks to the special teeth geometry.

For cutting lumber and plywood. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 18° cutting angle, 10° ATB+Shear grind.

Delivers splinter-resistant cuts in all wood, plywood and wood composites.

Ideal for underpowered saws.

0.125 kerf thickness, 0.098 plate thickness, -5° hook angle, Flat Tooth + Alternate Tooth Grind.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws.

Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood.

0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind.

For fast rip and crosscuts. Excellent cut on plywood, soft and hardwood.

To be used on radial arm saws, miter saws, table saws.

0.102 kerf thickness, 0.071 plate thickness, 18° cutting angle, 10° ATB+Shear grind.

For fast extra-clean crosscuts & occasional rip cuts. Excellent cut on plywood, great cut on wood.

Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood.

0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 10° ATB+Shear grind.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

For very long-lasting cuts, up to 60 times longer than carbide blades.

For portable circular saws/miter saws. Cut fiber cement & plasterboard.

0.083 kerf thickness, 0.063 plate thickness, 12° hook angle, Trapezoidal Grind.