Best 2 Car Floor Jacks in 2026

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

Built-in internal safety valve and vent plug ensures safe operation

Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch

3.5-ton/7,000 lb. lift capacity

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

Net weight :5.68 lbs, Lift range from 4.09 inches to 15.15 inches

With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy ratchet handle and the smooth-running spindle, changing tires is child's play from now on.

The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack

BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly; Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage

USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs)

Great Little Tool. This jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height

Universal Size Design.Maximum Load Bearing : 3 Ton.Pinch weld jack adapter can fit most jacks and vehicles.Please verify dimensions and ensure fitment to your vehicle

Size Information.Floor Jack Rubber Pad Dimensions : 75mm/2.95inch Diameter 35mm/1.37 Height; Slot Dimensions: 10mm/0.39inch Wide 15mm/0.59inch deep

▼ Match & is used compatible with BMW parts # 51717237195, 51717065919 and 51718268885 jack pads / supports.

▼ CNC machined from solid structural billet aluminum + black resistant and weathering anodized.

▼ Prevents rocker panel and jack point damages while jacking up your car at factory jack points. Does NOT touch or harm any painted surface of your vehicle.

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.

【Fits most Floor Jacks and vehicles】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

【Size】Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base enhances stability and strength; Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches

Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability; Inner/outer welded structure delivers leak-free performance

Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches.

A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety.

This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another.

[Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks.

[Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is.

[Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time and energy.

WEIGHT CAPACITY: 4,500 lbs

STEEL LIFTING SADDLE with 360 degree swivel.

INCLUDED CASE: Clean and easy storage with blow molded plastic case

Prevent your OE Jack Points from bending when using a jack to lift your car

Fits most Jacks and most late model Corvettes

Durable polyurethane construction, soft enough to absorb hard edges while supporting the vehicle

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Made of Durable rubber construction and deep cross slotted design, provides more cushion and crush resistance.

Jack pad is strong enough to support your lifting point and soft enough to prevent bending or fracture of clamping weld and frame longitudinal beam when jacking up your car.

Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

STRONG: Built to meet or exceed ANSI and PALD standards for construction, durability and performance

VERSATILE: Works on a huge range of vehicles, with a lift range from a low 3 inches to a high 19-1/2 inches

FAST: Save time working on vehicles thanks to dual-piston quick-lift pump that raises the unloaded lift arm to full height in 7 pumps

Specification: 10 ton (20,000 lbs) capacity with a 4.92" minimum lift height and 8.46" maximum lift height

Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks; Suitable for wider variety of vehicles including trucks and SUVs

Ultra Low Profile: The retracted height is as low as only 4.92", suitable for extreme working conditions

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

🏎️【Durable Rubber Jack Pad Rubber】 Jack Pad is made of durable rubber structure and cross slotted design which will provide greater cushioning and compression capacity. Warm Tips: Because of pinch weld jack adapter is newly factory production and heavy duty rubber material, so this jack rubber pad will has a little bit rubber smell, please put it in the ventilation room for some while! Please do not mind it.

🚙【Universal Floor Jack Pad for most vehicles】 Floor jack rubber pad puck fit most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

🚗【Easy To Use】 Jack pads for floor jack is a slotted crossline on the top of the pinch weld jack adapter, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack.

[Capacity]Scissor lift jack max load 1.5 ton (3,300lb) capacity.Lifting height range from 3.7"to 15.4".Total length:17.7";Weight:7.3lb

[Durable Material]Scissor jacks for car adopt welded forged steel construction to ensure durabilty,solid and corrosion-resistant.The design of the large tray at the bottom can perfectly adapt to uneven roads.Comes in handy in emergency tire servic

[Wide Use ]1.5 ton scissor jack fit for most family cars of less than 1.5 tons,such as SUV,MPV,travel trailer,station wagon,mini bus,RV.Collapsible jack can save storage spare of trunk.Portable jack can be an emergency roadside kit for car when long distance,quickly and easily make a change in case of flat tire

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13"

The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

The floor jack has a large saddle surface area for better contact with the load being supported

[2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs.

[LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs.

[BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity.

🧰Note‼️: ① Please use the jack on a flat ground. ② The jack must be placed parallel to the car. ③Stay away when the jack is working. ④ Do not exceed the marked load capacity. 📣How to Use the Wrench? 1. Pull out the cable and connect it to the electric wrench. 2. Select the correct sleeve, aim at the screw and push forward. 3. Keep pressing “Ⅱ” until the screw has been loosened and take off the screw. 4. After tire change, keep pressing “Ⅰ”and the screw will be tightened.

🧰Best Choice for Sedan & SUV: This car jack is made of high standard cold-rolled steel which has strong bearing capacity and is not easy to be deformed. The extra-widened base and reinforced solid screw rod help greatly improve the stability and durability of the scissor car jack. Built-in LED lights on the button are bright enough to change tires in the dark. Two jack heads fit for both Sedan and SUV, cars under 3 ton can be easily lifted.

🧰Safety Guarantee: When the electric car jack reaches the maximum height, it will stop working automatically. The self-locking structure of the jack is ready to prevent the car from falling suddenly and ensure your safety. The internal circuit breaker of the jack will help to protect your car from overload. 👉Pay attention to the positive and negative poles of the cable connectors on both ends, if reversely connected, there will be screw rod bending, abnormal sound and button failure.