Best 2 Car Floor Jacks in 2026

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

Extra low profile

Lifting range of 3-3/8 inches to 15 inches. The solid steel construction and safety release valve were features included to secure user safety

Patented bypass device protects against over pumping for safe operations

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base enhances stability and strength; Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches

Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability; Inner/outer welded structure delivers leak-free performance

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Product 1: 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Product 1: Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Product 1: Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car

Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity

Engineered using a drop forged alloyed steel construction for quality and durability

Specification: 10 ton (20,000 lbs) capacity with a 4.92" minimum lift height and 8.46" maximum lift height

Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks; Suitable for wider variety of vehicles including trucks and SUVs

Ultra Low Profile: The retracted height is as low as only 4.92", suitable for extreme working conditions

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13"

The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

The floor jack has a large saddle surface area for better contact with the load being supported

[2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs.

[LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs.

[BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity.

【5T Cars Changing Tire】This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-17.7 inch(155mm-450mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing.

【2 in 1 Kit】This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market.

【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power.It is only 8.35kgs for the whole set. The velcro on the bottom of the box prevents it from sliding in the trunk of the car.This small hydraulic jack is easily to be storage in the car trunk when not in use.

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, heavy duty steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-1/8" to 20" allows you can gain easy access under low-profile vehicles

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

Hydraulic Trolley Floor Jack Is Constructed With Heavy Duty Steel, Providing Long Term Durability With An Industrial Luster

Features A 2.5 Ton (5,000 Lb) Capacity With A Minimum Lifting Height Of 3-3/8" And A Maximum Height Of 14-15/16"

Ideal For Most Cars, Trucks, And Suvs; Safety Bypass System Prevents Over-Loading And Ensures Safe Operation

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

Load 1.8 tons(3968lbs).

It is suitable for cars and sports utility vehicles.

The bottom is bigger.

Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most cars; Constructed with heavy duty steel, providing long term durability

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Equipped with a safety bypass system prevents over-loading and ensures safe operation; built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability

Low profile car jack design allows for lift range from 8.5 inches to 23 inches. Slow controlled lowering of load by a conveniently located release valve knob.

1000 LBS capacity to help remove and install most transmissions from cars and trucks. Safety overload system prevents the floor jack from being used beyond its capacity.

Versatile saddle design allows for total adjustments in every direction. Pump handle rotates 360° for operation from any direction.

MUST HAVE COMBO for every shop or garage

UTILITY FLOOR JACK LIFT RANGE 5 1/8 “ to 13”

JACK STAND LIFT RANGE 10” to 15”

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

Max.Loading Capacity: 4.5 Ton (9900lbs) with lift range 8 inch to 20.2 inch.

Work with 12V Vehicle Power Outlet.

Built-in safety valve provides protection even out of power or on other rare occasion( of ram can not come down)

2 ton floor jack works for sedan and coupe. Lifting range: 4.9 inches to 11.8 inches

Complies with the ANSI/ASME PALD 2014 standards.Built-in safety valve prevents overloading

Heavy duty steel construction with rust resistant finish provides long term durability

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-11/16" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability