Best Omen Computers in 2026

Notice: We only provide after-sales service purchased from Seeed Studio

🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.

🌱【Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.

The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.

The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus.

It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL).

【Ultimate Raspberry Pi Pico W Kit】Contains over 450+ items and 117 online projects for Arduino and Raspberry Pi Pico W users, from beginners to advanced programmers.

【450+ Items】Aside from the Pi Pico W boards, all the necessary components are also included: Sensors (MPU6050, DHT11, Ultrasonics), Actuators, LEDs, I2C LCDs, RGB LED strips, Servo motor, and Pump,etc.

【Pre-soldered Raspberry Pi Pico W Included】The Raspberry Pi Pico W is an RP2040-based microcontroller board with wireless (802.11n).

✅ Get a three-piece deal of the AZDelivery 1602 LCD 2x16 Character Display Module with I2C Bundle at a special quantity discount price.

✅ Our 1602 LCD module has the I2C interface for 16-character display that requires only 4 instead of 16 connections. The I2C addresses allow 6 displays to operate simultaneously.

✅ The I2C interface allows for these handy display modules to have fast transmission. display 2 lines of 16 characters in black writing on a blue background. Contrast adjustment can be made via a potentiometer.

Price For: EachOrder Unit: Each1 Core Architecture: : AVR Core Sub-Architecture: : - Features: : 8 And times; 8 LED Matrix Display, Accelero/Gyro/Magneto/Air Pressure/Temp/Humidity I2C Sensors, Teeny Joystick For Use With: : Raspberry Pi Single Board Computers Kit Contents: : Add-on Board ATtiny88 SVHC: : To Be Advised Silicon Core Number: : ATtiny88 Silicon Family Name: : ATtiny

Silicon Manufacturer: : Atmel

Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.

Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.

Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on

0.96" 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.

Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!

Easy connection of the display for Arduino, for Raspberry Pi, for 51 Series, for MSP430 Series, for STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!

0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W

Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports

It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.

* The screen is made in Taiwan, quality is much better. If you have any problems when using this oled, pls contact us, we are glad to help you solve the issue you met.

* Four square holes are easy to install. The IIC address can be changed,it is convenient to use with different machines

* What you will get is : 1 X 0.96inch oled module blue.

UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE

Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W

Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports

Mini Development Board based on ESP8266 chip.

This board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro USB connection.

This board is 100% compatible with for Arduino and for WeMos.

This i2c display module is 0.96 inch diagonal,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W,Color:Yellow Blue

The IIC address can be changed,it is convenient to use with different machines Four square holes are easy to install

0.96 Inch OLED module for showing graphical & textual information directly on your micro-controller projects. It compatible with Raspberry pi, 51 MCU, STIM 32

Product manual: Please get the link from Product guides and documents below

OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers

The display performance is better than the traditional LCD display, also lower consumption; IIC (I2C communications) simplifies connections

Particularly design this keyestudio sensor expansion board V2 for micro:bit. breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), easy to connect it with other sensor modules.

Extending some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.Allows communication between micro:bit control board and other communication devices.

Two kinds method to power the micro:bit board, through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield.

Components: blue LCD display with i2c serial interface backpack; LCD screen can display 2-lines x 16-characters; The i2c LCD adapter built-in industry standard equivalent LCD controller

Default Address: 0 x 27 for PCF8574T chip; 0 x 3F for PCF8574AT chip; Please kindly check the chip of the i2c interface; ( Please remember to download the LiquidCrystal I2C library on GitHub before uploading the code to the control board)

,Compatibility: LCD display with I2C serial interface is compatible with for Arduino and Raspberry pi; Working voltage: 5V; To come with a potentiometer, which is applied to adjust backlight and contrast; How to wire: GND—GND; VCC—VCC; SDA—A4; SCL—A5

Applications: 0.96 inch display module can be applied to display graphics and text information directly on your micro-controller projects, able to be compatible with Mega, Raspberry pi, 51 MCU, STIM 32, etc.

Resolution: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V - 5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W

Embedded driver IC; Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star and Raspberry pi

Support NFC RFID reading and writing, P2P communication with peers

Support I2C, SPI and HSU (High Speed UART), easy to change among these modes

On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI

Compatibility: blue and yellow, 0.96 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Mega, Raspberry pi, 51 MCU, STIM 32, etc.

Product information: resolution is 128 x 64; View angle is more than 160 degrees; Supporting voltage is from 3.3V to 5V DC; Power consumption during normal operation is 0.04W, full screen lit is 0.08W

Driver and communication: embedded driver IC; Communication is IIC/ I2C interface, only needs 2 I/O ports; Compatible with MMDVM, Pi-Star, and compatible with Raspberry pi

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).

It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!

Compatible with Arduino, Raspberry Pi Pico, MCU, Raspberry Pi, ARM, DSP, FPGA platforms

2 megapixels image sensor OV2640, build-in 650nm IR block filter, visible light only

M12 mount or CS mount lens holder with changeable lens options

LATEST SOFTWARE SUPPORT: Ubuntu 22.04 LTS and Raspbian 11 support with hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 6.x with open source graphics and video libraries. UEFI support with GRUB sofware behaves like PCs. Direct first software support and community hub for third party help to get started. Video tutorials on YouTube for commonly asked questions.

COMPATIBILITY AND EXTENSIBILITY: Great RPi alternative with same form factor as Pi 3 Model B for re-use with existing cases and power supplies. Identically designed 40-pin header enables hardware re-use by maintaining same pins for functions like SPI, I2C, PWM, UART, and more. Powerful GPIO wiring tool, libretech-wiring-tool, is available on Github that can quickly toggle GPIOs and dynamically control dtoverlays for faster design, testing, and learning.

HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly performant OpenGL ES 2.0 GPU for accelerated 2D/3D.

✔️The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the 1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there

✔️The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions

✔️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform Arduino compatible. 【DHT11】 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required

Si5351A clock generator is an I2C controller clock generator

Precision 25MHz crystal reference

Three independent outputs, each one can have a different frequency

BME280 Pressure Temperature Sensor,Voltage:3-5V

The BME280 is a great new chip which was originally designed for the next generation of smartphones

With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area

Information: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V-5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W

Functional usages: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc

Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi

There's an I2C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!

It is 5V compliant, which means you can control it from a 3.3V Arduino and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)

6 address select pins so you can stack up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs

Voltage: 3.3-5V, Memory chips: AT24C32 (storage capacity 32K)

Clock chip: high-precision clock chip DS3231(there are 3 different chips for this clock module, DS3231N,DS3231SN and DS3231M, we send it by randomly.

About battery type: Battery is not included, you can use CR2032 or LIR2032 battery

Includes 10 cables of various lengths and styles that will get your Qwiic boards connected together.

Each Qwiic Cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination.

Includes: 3x Qwiic Cable - 50mm, 3x Qwiic Cable - 100mm, 1x Qwiic Cable - 200mm, 1x Qwiic Cable - 500mm.

Network Host Controller: Adopt Espressif ESP32 chipset and 2 Xtensa Low Power 32-bit LX6 microprocessors, clock frequency up to 240MHz, built-in 16M flash memory. Exquisite designs, and the full enclosure coverage ensures that circuit stability even in complex industrial applications

Compatible with Multi-platform Development: Support UIFlow, Ar-duino, ESP32-IDF, FreeRTOS, MicroPython, NET nanoFramework and other popular development platforms

Highly Developed: Provides a variety of interface resources (ADC/DAC/I2C/UART/SPI, etc.) internally, 15x IO pins and 15x IO leads at the bottom, easy access to the M5Stack software and hardware ecosystem, stackable module design, rich plug-in Ready-to-use sensor extensions

High Performance: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53 12nm SoC fabrication process for low heat 2T2R AC Wi-Fi with RSDB Features Bluetooth 5.0 USB 3.0 Available Gigabit Ethernet with WOL support LPDDR4/X USB-C PD for heavy applications

Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS INT8 inference up to 1536 MAC Internal L2 cache (512KB) and system workspace buffer (1MB) Supports all major deep learning frameworks including TensorFlow and Caffe

Maker Friendly: Stackable Design Programmable MCU 3 Programmable LEDs (Blue, Red and White) XPWR for external Power button Onboard SPI Flash Khadas TST Khadas KBI