Best Fisch Drill Bits in 2026

Ideal bits for drilling in plywood, hard wood, and soft wood with handheld drills and drill presses

Drill flat bottom holes, pocket holes, and overlapping holes

Wood case for easy storage and protection

Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled

Beveled edge leads to a perfect drilling of the diameter without any deviation

For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass

PREMIUM BUILD: Each short bit, also known as a wood auger set, is constructed of premium molybdenum 4241 HSS with evenly distributed carbides for resistance against wear while maintaining durability that lasts through each job.

STUBBY DRILL BITS DESIGN: The 135-degree standard tip design delivers high speed power for fast cutting against hard wood, laminated wood and laminate, fiberboard, particleboard, plywood, plastic, PVC, MDF, acrylic, nylon, and rubber.

HEX FIT: Each 1/4 brad point drill bit hex shank is compatible with a standard and quick-change chuck and drivers, providing versatility in drilling needs. Our wood boring bits are a perfect addition to any wood workers toolbox!

Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled

Beveled edge leads to clean drilling of the diameter without any deviation

For use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic glass

Chrome-vanadium steel lasts longer between sharpening

Less tear-out in hardwood, softwood and laminated materials

Optimized outer spurs insure fast and easy cutting of the wood, scoring the outer rim of the hole before the main part of the drill begins to do its work

Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them.

Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!

Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4’s, 6 x 6’s, PVC, Resin’s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects.

Suitable for hard and softwood, coated chip board, laminates as well as MDF plates

High rotation speed

Precise cutting quality

【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability.

【Most Commonly-Used 20 Sizes】A complete combo set of 31 jobber length industrial drill bits for metal drilling (1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64",7/32",15/64",1/4", 17/64", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2") . They fit the majority of power drill currently on the market and comes with a portable plastic case for easy storage and organization.

【Precise & Efficient Drilling Performance】✔ Fully Ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. ✔ 135° Split Point with round straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

Parabolic Flute design eliminating the need to withdraw the bit until the hole has been drilled through

Can drill up to 1350 holes without sharpening

European Pen Makers Drill Bits made from M2 HSS High Speed Steel for longer service

DURABLE MATERIAL - Classic High Speed Steel 4241 for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.

BRAD-POINT DESIGN -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID .

QUICK CHANGE: 1/4-inch Hex Shanks are compatible with both standard and quick change Chuck Drivers, providing versatility in drilling needs.

【High Quality】Precision milled brad point drilling tip for perfect self-centering and accurate positioning

【Efficient Design】Engineered double cutting edges and extra-wide flutes deliver fast drilling and chip removal for smooth and clean holes

【Integrated Hex Shank】1/4-inch hex shank compatible with standard and quick change chucks and drivers. 5/16, 3/8 and 1/2-inch drill bits come with one piece 1/4-inch hex shank

Forstner bit made of High speed steel, has a 1" cutting diameter and round shank, compatible with all standard drill and drill press chucks.

Excellent for drilling in softwood or solidwood, plywood,coated chip board, laminates as well as mdf plates

The tooth-shaped design for fast and flawless cutting, ensures less friction and heat, which enable optimized chip removal, longer service life.

【Areas of Application】35mm Forstner bit is ideal for drilling in soft or hard wood, veneered wood and non-laminated chipboard

【Clean, Smooth Holes】The tooth-shaped design of this high-speed steel forstner bit ensures less friction and heat.It is superiority in removal chip better.Cut the clean, smooth holes

【Easy to Start】The design of the center point of the forstner drills allows precise positioning without slipping,which makes drilling more easy

✅ Specifications: 8PCS includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits

✅ Features: 3/8" Hex Shank is easy to install and tighten ,prevent the bit from slipping. Extra sharp cutting spurs is especially designed for cutting through hard and soft wood or other materials smoothly and efficiently.

✅ Great performance: Easily make flat-bottomed and pocket holes with no chipping on any wood or wood products, plastic, polywood and other materials during processing or installation.

1. Nice tools for home repair and improvement.Perfect for DIY Wood-working Carving, Engraving, Drilling . Good quality material,and neatly processed drill tip enable to work smooth and clean.Smart round box make an easy job to take drill in and out.Good work for happy family!

2.11pcs wood drill,brad point drill set

3.Size : 1/8"-1/8"-5/32"-5/32"-3/16"-3/16"-1/4"-1/4"-9/32"-5/16"-3/8"

Includes 5 bits 15-35mm in diameter

Unique wavy rim design reduces friction and heat buildup

Razor-sharp edge creates smooth, precise holes

For wood

Brad point drill bit

Wood working drill bit

Clean, precise pocket holes and skip free clean cutting edge

CNC-Diamond ground and centrally ground center point

Can be re-sharpened up to 25 times

4 flute design

0. 8 taper ensures tight fitting plugs

Made from tool steel

Easy and effortless cutting due to ideal cutting geometries

For drilling splinter-free, true to size blind holes, for edge drillings and slant drillings in softwood and hardwood

Sizes: 20; 25; 30; 35; 40; 50 mm

True brad point on bits 1/8" (8mm) diameter sizes and larger

Full diameter shanks on bits 3/8” (10mm) and smaller

Sizes include: 1/16" to 1/2" in 1/64" increments

Parabolic flute design eliminating the need to withdraw the bit until the hole has been drilled through

Can drill up to 1350 holes without sharpening

European pen Makers drill bits made from M2 HSS high speed steel for longer life

Set includes 12, 15, 16, 18, 20, 22, 24, 25, 26, 28, 30, 35, 38, 40, 45, 50mm sizes

All bits have an overall length of 90mm or 3-1/2\

Metric sizes are required for many hardware installations

Suitable for hard and softwood, coated chip board, laminates as well as MDF plates

High rotation speed

Can be resharpened up to 30 times before needing to be replaced

Forged and manufactured from high-speed steel in Austria

For use with power tools on softwoods and hardwoods

Includes one 20mm Black Shark Forstner Drill Bit

Clean, precise pocket holes and skip free clean cutting edge

CNC-Diamond ground and centrally ground center point

Drop Forged from tool steel, for superior sharp edge retention

Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled

Beveled edge leads to a perfect drilling of the diameter without any deviation

For use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic glass

Superior designed flute for excellent chip extraction

Made from chrome vanadium steel

Ground center point prevents bit walk

Center point, 2 cutters

Wave shaped spurs cut with 25% less power than standard Forster

Reduced heat build for 3.6x longer tool life

[Widely Applications] The sharp drill bit can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc. Great for boring concealed hinges and door locks.

[SPECIFICATIONS] Drilling dia.: 35mm (1-3/8 inch); shank dia.: 10mm; total length: 80mm. Compatible with all standard drill and drill press chucks.

[HIGH QUALITY] The cutting edge is made of K30 monolithic tungsten carbide, hardness ≥90HRA, bending strength >1900N/cm², ensuring its high hardness, rust proof, sturdy and durable.