Best 90 Degree Elbow Fittings in 2026

PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears

MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA

PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears

MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA

Universal fit such as: oil/ fuel/ gas/ water/ fluid/ air line hose ends

Designed to match with common performance hose and hose ends

Universal fit such as: oil/ fuel/ gas/ water/ fluid hose ends

Designed to match with common performance hose and hose ends

Universal fit such as: oil/ fuel/ water/ fluid/ air line hose ends

Designed to match with common performance hose and hose ends

Prodcut Design: there is six locking balls in the coupler which hold the plug securely, Push-on style coupler, insert plug into coupler for fully automatic, quick coupling action without pulling sleeve back.

Common Using: The standardized fittings can be used universally, which are Interchangeable and compatible with other manufacturers.

MEASURING PIPE THREAD SIZE TO FIND THE RIGHT THREAD TYPE CAN BE CONFUSING. THREAD DIMENSIONS ARE CONSIDERED A NOMINAL SIZE AND DON'T MATCH STANDARD UNITS OF MEASUREMENT. USING THE PROPER PIPE THREAD TYPE IS CRUCIAL FOR MAINTAINING AND INSTALLING EQUIPMENT, SO HELPING YOU DETERMINE WHAT PIPE THREAD YOU NEED IS IMPORTANT TO US.

This fitting will only work with American Pipe Threads. Will not work with Hose, Compression, flare, etc.

Class 125 (150) for Steam, Water Gas, Oil and Air Service.

Pipe Threads should be tightened ups to 2 1/2 turns past finger tight. They are not meant to thread all the way.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Includes: 1 Male plug, 1 Female plug, + 1 Female coupler (all 1/4" NPT)

Disclaimer: Not recommended for use with high vibration tools (impact wrenches, orbital sanders, etc.). Also, use of these couplers with a leader hose will extend the lifespan of the product further

Color - Red

Finger tighten only... Do Not Use Pliers!

MATERIAL: The red anodized aluminum makes connector lightweight and corrosion resistant.

APPLICATION: 2 pieces in package. The swivel air hose connector is perfect for pneumatic air tools such as grinders, sanders, glue guns, drills, and etc.

5 PIECE SILICA GEL CLAMP SET Each clamp with loop has a width of 15mm with the silica gel cushion in place. Screw holes are 6.5mm.

WIDE APPLICATIONS make our silica gel cushion clamps indispensable in marine, automotive, and industrial settings. Our silica gel cushioned clamps can be used as water line clamps, pipe clamps, and fuel line clamps.

Material - Plastic

Chain - Yes

Fire Hose Fittings: Quick access when a fire hose connection is required, suitable for some riser systems and connections.

Seal: Dust-proof seal to prevent foreign matter from entering the FDC thread.

Limited Warranty

10 PCS BRASS STRAIGHT PUSH CONNECTORS NPT THREAD: 2 PCS 3/8 Inch O/D × 3/8 Inch NPT & 2 PCS 3/8 Inch O/D × 1/2 Inch NPT & 2 PCS 1/2 Inch O/D × 1/4 Inch NPT & 2 PCS 1/2 Inch O/D × 3/8 Inch NPT & 2 PCS 1/2 Inch O/D × 1/2 Inch NPT;

1 PC PLASTIC TUBE CUTTER: The air brake fitting set comes with a quality wire cutter for your convenience. Please use the cutter to get a tube with smooth cut surface!

D.O.T. APPROVED：The DOT air line fittings, made of high-quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 air brake system requirements to ensure safety during your use.

THREAD SEALANT PRE-APPLIED ON ALL MALE THREADS: All brass fitting threads are coated with red anti-leakage coating, so there will be no air leakage after connection.

PLASTIC STORAGE CONTAINER: Includes a durable but lightweight plastic storage container, which can protect the air hose fittings from rusting and keeps all the air fittings stored intact.

WIDE ALLPICATION: The quick connect air hose fittings widely used for semi-trailers, trailers, buses, mobile equipment, industrial workshops and other various machinery air braking systems.

AFTER-SALES GUARANTEE: If you have any questions about Siptenk dot air fittings, please feel free to contact us. We will do our best to help you solve the problem and ensure to provide you with a pleasant shopping experience.

👉【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations)

👉【ALL IN ONE SET】: Unique Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 6 PCS: (2 pcs) Tube Tee 1/2" tube, (2 pcs) Tube Tee 3/8" tube, (2 pcs) Tube Tee 1/4" tube. 6 PCS: (2 pcs) Tube Union connector 1/2" tube, (2 pcs) Tube Union connector 3/8" tube, (2 pcs) Tube Union connector 1/4" tube. 2 PCS: Schrader Valve 1/4" tube .

Total Size: 16 x 6mm / 0.63'' x 0.24''(L*D)

Inner Dia.: 4mm / 0.16''