Best 90 Degree Elbow Fittings in 2026

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

1/2 INCH CLOSE NIPPLE - Our 1/2" black steel pipe nipple is a short length of cast iron pipe fittings with male pipe threads at both ends for connecting pipes and fittings. You can connect this NPT (national pipe thread) 1/2" inch nipple metal piping to 1/2" inch floor flanges, 90 degree elbows, tees, couplings, caps, etc.

RAW IRON: We use 100% top-quality raw material that assures high performance of our pipe decor industrial pipe fittings. Brooklyn Pipe has a wide range of available rang of decorative DIY pipe fittings that can help you with all your projects.

NO CHINA STAMP: Our Close Pipe Nipple doesn't have the word "CHINA" stamped into the close nipple which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market.

Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Gasket and nut for air tight seal through bulkhead

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm

Not intended for pressure use

For use where systems will not exceed 140° F

10 PCS BRASS PEX ELBOWS

10 PCS BRASS PEX TEES

10 PCS BRASS PEX COUPLINGS

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

1/4-Inch NPT x 1/4-Inch NPT, Coupling for connecting two pipes with the same diameter in a straight run

Female -6 AN to -6AN coupling hose union equal fitting connector, total length: 38.6 mm

Made of high quality lightweight 6061-T6 cnc machined billet aluminum material

Red blue anodized finish for durability and strength

Union fitting for connecting and disconnecting two pipes more easily than with couplings

Socket openings on both ends for connecting two male pipes

PVC for strength and resistance to chemicals and corrosion, and an EPDM seal for resistance to oil, water, and some solvents

Half union for connecting and disconnecting two tubes more easily than with a coupling

45-degree flare head tube connection on one side and a male NPT connection on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Product Using: Universal coupler accept the three most popular interchange, I/M, ARO and T type, which is perfect for shops where multiple plugs are used.

Product Including: 2pcs 1/4 inch FNPT universal air coupler, 2pcs 1/4 inch MNPT universal air coupler with 1/4 inch body size, 6pcs 1/4 inch MNPT air plug, 4pcs 1/4 inch FNPT air plug, all air couplers and plugs are 1/4 inch body size which is most common size.

Material: Body of the coupler is made of aluminium with red coating, sleeve of the coupler is made of aluminium with black coating, the plug is made of aluminium with red coating.

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping

Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,

May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors

Bulkhead union coupling for connecting two hoses with the same diameter in a straight run

Thick Brass for good corrosion resistance,ductility at high temperatures,and low magnetic permeability

Since the customer reported that the barb OD of 6mm is too small to be used normally,so we have improved the product,and now the barb OD of the product is 6.4mm.

【DURABLE】--- High quality aluminum, painted surface.And the use of high quality rubber.Acid and erosion proof, insulation well, anti-aging, hight tensile strength,long life.

【DIMENSION】--- Connect size:1/2 inch FPT port.Gladhand:105 x 56mm / 4.1 inch x 2.2 inch ,please check the image.

【PACKAGE INCLUDE】--- 2 pack red glad hands + 2 pack blue glad hands + 10 pack Seals.

【Premium Quality】: High-quality brass with thickened wall, resists corrosion, rust and high temperature (32℉—200℉).

【Non-Pollution】: Lead free brass, comply with drinking water standard.

【Applications】: This brass crimp fitting can be used for PEX pipes in plumbing jobs. Great for hot or cold water distribution in your home, in warehouse or in RV.

★ Lead Free Compliant Brass.Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents.

★ 1/2" PEX Tee fitting. 1/2" PEX coupling fitting. 1/2" PEX elbow fitting.

★ Compatible:Watts;Everhot;Viega;etc. Certified for use in potable water applications.

Plumbing fittings fit Copper, Pex, CPVC Pipe and connects them in any combination. Certified by UPC / IAPMO to meet Lead-Free ANSI/NSF-14/G Compliant.

AWWA C800 Compliant. Manufactured in an accredited facility, meeting ASME B1.20.1 ASSE 1112

Use in potable water and hydronic heating applications

Air King universal coupling female NPT end

Female NPT thread with hex for a wrench

Made of iron

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR pushfit couplings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

COUPLING AND CLIP COMBO KIT: 1/2" x 1/2" Couplings (10 pcs) AND 1/2" Disconnect Clip Tool (1 pc)

LIFETIME WARRANTY: The "Gold Standard" of Push-Fit fittings- Designed and manufactured by the plumbing experts.

PUSH-TO-CONNECT PIPE: Easiest and fastest way to join copper, CPVC, or PEX pipe. No need for installation tools, glue, or soldering! Simply push to connect pipe.

<p>【Durable & High Quality Material】: - 37 Degree Glad Hands Body Are Made Of 6061 Die Cast Aluminum. Accessories With High Hardness Steel Plate With Grade 12.9; Anti Rusting Plated Bolt With G5 Grade. Working Condition Elevated Temperature(+158 °F ± 5 °F); Low Temperature(-40 °F ± 5 °F). Color-Coated Are Red And Blue, Gladhand Kit For Easy Identification.</p>

<p>【No-Leak】: - Glad Hand Gaskets Are Made Of High-Quality Rubber, Making It More Lightweight, Flexible, Corrosion-Resistant, Oil-Resistant, Chemical-Resistant And Waterproof. Ensure Perfect Fit At 140 PSI Air Pressure, Top Quality Glad Hand Grommets Prevent Air Leakage Efficiently.</p>

<p>【Application】: - The 37 Degree GladHands Are Suitable For Most Semi Truck. Replace No.: Velvac 035092 & 035093; Phillips 12-1361 & 12-1381; Hebco 441068 & 441067;Tramec Sloan 31611 & 36261; 1046260e & 1046260s; Midland-Grau 11441 & 11440; etc. Meets SAE J318 Requirements.</p>

Union coupling for connecting two hoses with the same diameter in a straight run

Connects to a 1/4" I.D. hose on both ends

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

[Material]: Heavy-duty brass,strong and durable,with corrosion resistance,high temperature ductility and low permeability

[Features]: Both ends of this joint have 45-degree flare connection,which has multiple functions and is convenient for installation and disassembly.It is easier to connect and disconnect the two pipes than a coupling

[Package includes]: 2 PCS 3/8" Male Flare x 3/8" Male Flare + 1 PC Teflon Tape

【Food Grade Drinking Water Hose】: The Automavenn drinking water hose is made of high quality eco-friendly rubber, which can provide clean, safe, and good taste water for RV camping. We can make sure that no plastic or rubber odor when you use the garden hose outdoor under the sunshine for a long time.

【Drinking Water Safe】: Under the CA65 standard, Contains a BPA-free, lead-free and phthalate-free formulation. Has No Rubber Taste. We will provide a healthy and safe RV traveling for your family.

【Anti-Kink, Twist, Tangle Design】: Our RV drinking water hose is different between the original water hose or garden hose. We make of 3 layers premium hybrid polymer material, so that ours is more lightweight, durable, and flexible than the traditional. It’s very easy to roll up to storage because the anti kink design which ensures recovering perfectly even after run over, longer lifespan.

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

1/4"x1/4" Brass Pipe Hose Fitting with NPT Female Thread Straight Hex Nipple Fast Coupler

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility

Made with precision process, no leaking and durable, easy to connect and disconnect

The flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. The hydraulic quick connect coupler is an ISO 16028 flat face style, fits all standard flow skid steers attachments. Impoved design high flow performance and maximum service life.

The universal hydraulic quick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard

Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction，industrial hydraulic lines.

Material:High quality CA360 brass.

Dimension:Inner diameter1/4" female NPT thread to 1/4" female NPT thread.Outer Diameter:19mm / 3/4-16 inch.Fit min 0.75" diameter hole.

APPlication:Female coupler for connecting NPT fittings through a bulkhead.

Heavy Duty Steel Material: Heavy duty zinc plated steel construction features high corrosion resistante and long life use.

Standard Size Air Hose Fittings: 1/4-Inch Industrial style interchange quick coupler and plugs with 1/4"-18 NPT thread for widely use. Recommended use with thread seal tape(Included) for better sealing performance.

Easy to connect or off: Designed to rotate for preventing twisted hoses and easily to achieve the connection or disconnection of piping without other tools.

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR push fittings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.