Best Zinc Jobber Drill Bits in 2026

Speed Tip Reduces Walking

Ideal for drilling in metal, wood, and plastics

No spin shanks

JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank

MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits

CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits

Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments

High-speed steel (HSS) provides hardness for wear resistance

Black and gold oxide finish resists corrosion and increases the hardness of the drill bit

COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.

SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

19PC METRIC SET - The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Well organized in a tough metal indexed storage case for easy transport to your worksite.

HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong

TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.

PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.

Norseman Drill & Tool 46962 Type 190-AQF Premium Ultra-Dex Bully

29 Piece Jobber Length Drill Bit Set

Three Flats Shank in Orange Case

【10Pcs 1/8" Cobalt Drill Bits】10Pcs - 1/8”(Dia 3.18mm) x1-5/8”(Flute Length 41.28mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization.

【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability.

【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

Durable Construction - HSS material with black and gold coating increases lubricity, provides corrosion protection, and increases durability. Ensures longer tool life in multiple working conditions. Tapered web provides strength, durability and reduces breakage.

No Center Punch is Needed - 135° split point design for fast penetration with less pressure. Twist drill bit kit will not "Walk" or "Wander".

Parabolic Flute - Parabolic flute for better chip removal and reduced heat build-up.

Premium 6% Cobalt Steel ,66-69 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.

Grinding the Cutting Edge Three Times,with the High HRC and Heat Resistance of the Material,Desigh for Cutting through Stainless steel , Iron plate, Aluminum,Ducts,Wood,PVC and Plastic.

This Cobalt Drill Bit is Typically Capable of Running Two to Three Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.

JOBBER LENGTH: 5/32-inch cutting diameter, 2-inch flute length, 3-1/8-inch overall length, 135 degree split point, straight shank

MADE FROM PREMIUM M2 HIGH-SPEED STEEL: perform better because of its well-balanced toughness

TITANIUM NITRIDE COATING: add lubricity and hardness, enhancing chip flow, finish hole quality and drill life

M35 COBALT HIGH SPEED STEEL: 3/16" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.

135° SPLIT POINT: 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank allows for firmly holding and accurate centering and makes drilling precise and faster.

FULLY GROUND PROCESS: Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.

Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.

Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.

Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 17/64 inch, Total length 4-1/8 inch, Working length 2-7/8 inch.

🔨【Various Sizes】 13 sets of drill bits include 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", can meet more needs.

🔨【M35 Cobalt Drill Bit】 The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc. Note that it is not applicable to quenched bolts.

🔨【Quick and Efficient】 The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal.

1/8" drill bits for metal is made of M35 cobalt high-speed steel, containing 5% cobalt, which increases wear resistance and durability, and enhances its use efficiency

135°Quick cut flow point, precise positioning, lower pressure, fast penetration. Equipped with a straight shank to prevent walking, making drilling more precise and fast

Fully ground spiral groove design clears particles quickly,decreases friction and heat for faster drilling performance

【High Quality Material】：Made from M35 high speed steel with cobalt for added durability, the Yougfin jobber twist bits are friction and heat resistant

【Dual Flutes】:Drill bits are rotary cutting tools that have two cutting edges and two flutes which are grooves formed in the body to provide cutting lips, to permit the removal of chips and to allow coolant or cutting fluid to reach the cutting action

【135° Split Point】：These bits have a small point angle of 135° and require less pressure when centering in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.

FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

SELF CENTERING - The 135° quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

✅【5% COBALT TWIST DRILL BITS SET】Made from M35 Cobalt Steel with Molybdenum and Cobalt added to form a hardened alloy, can measure up to 67 Rockwell hardness, cut faster, last longer, and last longer than normal HSS drill bits 12 times.

✅【19PCS METRIC DIRLL BITS SET】The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Organized in a sturdy plastic storage case for easy transport to your workplace.

✅【TWIST DESIGN AND PERFORMANCE】Precise 135° SPLIT Point, Gold Oxide Surface and Round Straight Shank. Prevents walking and removes chips and particles faster. Precision fully ground to ensure smooth chip movement.

COBALT GOLD OXIDE JOBBER DRILL BITS: 29 PCS high speed steel with 5% cobalt drill bit set resists high heat abrasion while drilling. Cobalt steel provides extended tool life compared to high-speed steel drill bits, and maintains the tool's toughness and hardness in high drilling temperatures. A gold oxide finish acts as a lubricant and provides wear resistance.

ROUND AND PORTABLE CASE: Say goodbye to constant losing or misplacing your drill bits! Jefe Hex cobalt drill bit set for metal comes with an ergonomic and portable round carrying case with built-in clip. The case can be easily attached to your tool belt keeping your bits within immediate reach!

135 DEGREES SPLIT POINT TWIST DRILL BITS: A self-centering 135° split point drill tip penetrates hard materials without a pilot hole and keeps sharp without walking on the surface compared to a 118-degree point. Proper twist and flute design clears chips and particles fast. Drill bits larger than 3/8" have 3/8” reduced shank for majority drills in the market. Drill bits smaller than 3/8" have three-flat shanks that reduce spinning in chuck.

【5Pcs 3/8" Cobalt Drill Bits】5Pcs - 3/8”(Dia 9.26mm) x3-5/8”(Flute Length 92.08 mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization.

【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability.

【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

115 Pieces Set Includes: 29pcs Fractional Size: 1/16 to 1/2 inch bits in 1/64th increments; 26pcs Letter Size: A To Z; 60pcs Numbered Size: #1 To #60; Set includes the drill bit holder with size index for easy storage and organizing

Perfect Drill Bits: Precision grinding process for a clean surface and high grinding accuracy. Universal round drill shank, widely applicable of tool holding systems and tightly clamped

135° Split Point & Twist Design: The 135 degree fast cutting point is automatically centered and penetrates quickly with less pressure, reducing walking, fully ground drill bit with sharp and durable cutting edge. Twist design for clear chips faster

19pcs of Metric Twist Drill Bits - 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm. Enough for daily use.

HSS 4241 - Made of high speed steel 4241 and coated with titanium for rust prevention.

Straight Shank and 118 Degree Point Angle - Straight shank for standard drill chucks and collet chuck to hold firmly, assuring accurate centering; Helical flute for swarf to easily get out; standard 118-degree point configuration is ideal for general purpose drilling applications.

【Drill Bit Set】：Includes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2". This 29 PCS M35 twist drill bit set meets all your needs

【Cobalt 5% HSS】: High-Speed Steel M35(Cobalt 5%)cobalt drill bit set can effectively drill tough and high tensile materials. The M35 drill bit is especially suitable for cutting hard metals, such as stainless steel, cast iron, superalloys, titanium alloys, rigid plastics, and wood, It can also be used in soft materials

【Characteristics】: The metal drill bit is 135°split point with a round straight shank, self-centering prevents walking, and makes drilling precise and faster. Double back Angle process and full grinding process is adopted fully ground process twist design helps clear particles faster, decreases friction and heat for a cooler drilling performance

COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit.

40PC FRACTIONAL INCH BITS - The set includes 40pcs of M35 cobalt steel twist drill bits, 3/64" x 10pcs, 1/16" x 10pcs, 5/64" x 10pcs, and 3/32" x 10pcs. Manufactured to German DIN338 standard. Packed in a plastic bag.

FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

✔️【DRILL BIT DIMENSION】:25/64"(Diameter) x 3-3/4"( Flute Length) x 5-1/8"(Overall Length)

✔️ 【COBALT MATERIAL】: HSS(M35) Cobalt Steel Enable Long Drilling Life and Fast Drilling Performance

✔️ 【SURFACE TREATMENT】: Gold Oxided Ember Finished Treatment Keeps High Hardness of Body Shank

What You Get: This drill bit set for metal includes 5 – 1/2 Inch x 6 Inch bits of the same size.

A Must in Your Tool Box: This cobalt drill bit set is designed to surpass your expectations in terms of durability and performance, ensuring fast and easy penetration through hard metals.

Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt, which has excellent durability and superior resistance against abrasion and high heat.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

【SELF CENTERING】Would you feel trouble by reason that the drill could not precise position easily during working? No worries! Designed with 135° split point, BOEN drill bit set features the characteristics of preventing walking and cuts stainless steel more fasterly. The handle is straight and round, which means that the high-speed drill can be compatible with all kinds of equipment.

【Convenient Spiral Groove】 A spiral groove design of drill bit set can quickly remove particles while working, reduce friction and heat, thereby improving drilling performance. With it, your powerful machine can easily do DIY, home maintenance, repairs, and more.

【Superior Material】M35 high-speed drill is durable, safe and eco-friendly. The 5% cobalt content extends the tool life and ensures higher heat resistance of the drill. Compared with ordinary drill, it is not only for good performance but also for more important thing--high efficiency!

【20PCS 1/4" Cobalt Drill Bits】20PCS - 1/4"(Drilling Diameter) x2-3/4"(Flute Length)x4"(Overall Length) Metal Drill Bits. This drill bit fits the majority of power drill currently on the market.

【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability.

【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

29PC 1878 1/16-1/2X64th black and gold jobber bit barrel

Set range: 1/16-inch - 1/2-inch

Cle-Line is a familiar name to users of quality cutting tools

0.12" diameter carbide tipped jobber length drill 118° standard point

1 5/8" length of flute

2 3/4" overall length