Best Hyperlite Lighting in 2026

Traxxas 6795 - LED Light Kit, Rustler 4x4

Features: Efficient, high-intensity LED lighting Front bumper with integrated LED lights Roof skid with integrated front (white) and rear (red) light bars Regulated power supply for stable lighting performance Easy installation with included power tap connector Mounting hardware

Includes: (1) LED Lights/Light Harness (4 clear, 4 red) (1) Front Bumper (1) Rear Bumper

Traxxas 8026X - LED Rock Light Kit, TRX-4

Features:

Includes: (1) LED Light Kit

Traxxas 8990 - LED Light Kit, Complete, Maxx

Features: Compatible with Velineon VXL-4s ESC Fully functioning Brake Lights that work in both Forward and Reverse Direction. Brilliant White Reversing Lights Fully Waterproof 3 Lighting Modes: Daytime, Low-Beam, and High-Beam Easy to install with Simplified, Concealed, Color-coded Wiring

Includes: (1) Front Bumber with LED Lightbar (1) Multi-function Rear LED Lightbar (1) High-voltage Power Amplifier Installation Hardware

For sale is high quality 8-LEDs RC LED Light Kit.

Includes 8pcs LEDs: 2pcs White LEDs + 2pcs Red LEDs + 4pcs Orange LEDs.

LED size: 5mm (white LED), 5mm (red LED), 5mm (Orange LED).

Traxxas 6591 - Pro Scale Advanced Lighting Control System, TRX-4

Features: Day / Low / High modes Smart brake lights Reverse lights Hazards Turn signals Crawl setting

Includes: (1) Pro Scale lighting power module (1) Pro Scale lighting distribution block (1) Power module mount (1) Motor sensors wire harrness (1) MAXX link cable (1) Receiver communication cable Installation hardware

Traxxas 8086 - LED Expedition Rack Scene Light Kit, TRX-4

Features: Multi LED Lightbar with Wiring Harness, Mounting hardware, Fits # 8111 Body

Includes: (1) LED Lightbar (1) Wiring Harness (1) Plastic Tie Wrap (8) Cap Head Screws

This LED set includes 4pcs LEDs,2 white LEDs and 2 Red Lights

Suitable for all kinds of RC car truck tank.

LED size: 5mm (Red/White LED)

RC CH3 Controling flashing Mode.

Using receiver as power supply.

This RC light bar with strobing-blasting Flashing fast-slow Flashing alternately Mode and so on

Compatible with the Rustler, Rustler 4x4, Bandit, Nitro Rustler, Jato & More. Will work on many 1/10 Scale rock crawlers, trucks, stadium trucks, buggys

70mm Long - Mounting at 59mm or 74mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit

28 super bright led lights - great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body

light voltage: 4.8V-7.4V

100% brand new and high quality

Suitable for 1/10 1/8 RC car, Rally car, Monster truck, Short-course truck, CC01 D90 SCX10 crawler car and so on.

4 LED Lights Kit 2 PCS White Headlamps 2 PCS Red Taillamps for 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car

Directly powered by the receiver, no separate battery required, for convenient to operate.

Material: Plastic & Metal

Warm note : Do NOT power by battery directly

With 12leds, enjoy driving your crawler at darkness night

Upgrade Light Bar with hardware, easy to mount on

color changeable high-intensity LED light kit can be used as headlight, tail light, roof light, front/rear bumper light and police lights.

The light bar can be controlled remotely via your transmitter or the button on the LED controller. 13 switchable light modes and colors changeable. On/off control

Aluminum alloy frame and transparent acrylic protective cover effectively protect the lights from damage and dirt.

Super bright DIY RC light bar accessories for 1/10 1/8 Scale truck

Powered by receiver (May need JST Y Cable); don't connect with batteries directly

Working voltage: 5V-7.4V; 36pcs LED bright lights; Cable length:16.9 in.

▶ Suitable for 1/10 scale RC car models, such as Yokomo Tamiya HSP HPI AXIAL RC4WD

▶ Super bright flashing bar, this RC simulation flash lights will make your car more cool and attractive

▶ Advanced design of circuit board, HOSI power saving

Direct remote control three-channel control. Designed perfectly for Traxxas TRX-4 Axial SCX10 RC4WD 1/10 RC Rock Crawler Car

The outer diameter of the headlight is 19 mm, and the outer ring is protected by super thick silicone sleeve ring.

Cold white light source in inner ring and color light in outer ring, highly simulated.

High quality and cheap price.

Flashing fast-slow Flashing alternately Mode.

Strobing-blasting Flashing Mode.

✔LED light color: 4 white LEDs and 4 red LEDs, Super bright

✔LED size: 5mm (white LED), 5mm (red LED)

✔Easy to install on rc car body shell, Directly powered by the receiver, for convenient to operate

rc led light Input voltage: 4.8-6.0V. Working current: 100mA. It can support high voltage and general receivers with improved circuit board

RC LED Light Kit wire length: 30cm. Compatible with 1/10 and 1/8 RC car / truck / crawler

Improved design of circuit board, HOSI power saving.Easy to install and operate.Suitable for 2.4G GT2 / GT3B transmitter and more

Compatible With the Traxxas 1/18 Teton, 1/16 Summit, 1/16 E-Revo, Redcat 1/18 Volcano, 1/10 Tornado S30 Buggy, ECX 1/18 Temper, 1/18 Ruckus, 1/10 AMP Desert Buggy & 1/10 Boost Buggy. Will work on many 1/18-1/16 Scale Vehicles & 1/10 Buggies

55mm Long - Mounting at 43mm or 58mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit

3 SUPER BRIGHT LED LIGHTS - Great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body

【20 Light Modes】With 20 kinds of light modes, with high brightness, vibrant colors, can switch by remote control. 20 light modes: white light, red light, blue light, green light, pink, strobe, 7-color strobe, marquee, etc.

【Supplied directly from receiver】The input voltage is 5V-8V and can be supplied directly from the receiver. The light with strong impact resistance can be work in water for more than 60 minutes, if your car drives in water, no need to worry.

【Drive at Night】With lights for decoration, your car can drive at night, irradiation range above 50cm, making your remote control car cool attractive and more playable

Suitable for RC model car.

Made of PVC material, durable and reliable in use.

Simple and easy to install, great replacement parts for your RC car.

Traxxas 7884 - Front LED Light Bar, 82mm, Double Row, High Voltage, X-Maxx

Features:

Includes: (1) LED Light Bar (2) Mounting Screws

Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.

Compatible with HSP Traxxas CC01 Axial SCX10 1/10 1/8 rc car truck .Could work for 12 pieces 5mm led lights.

Method of use: Connect the JR connector to the receiver third channel(CH3), switch the controller CH3 switch swiftly twice or once and the flashing mode will change.

Official Traxxas LED Kit Designed for the UDR

Ultra-Scale Looks and Performance

Bolts right onto a Traxxas Unlimited Desert Racer!

6 Super Bright LED Lamps.

Voltage 4.8V-7.4V.

Simple installation, make your car really beautiful.

comingsoon, mpn_9290, status_Current, TRX_PART

1.Compatible with Traxxas TRX-4 Axial SCX10 II 90046 90048 RC4WD D90 D110 CC01 KM2 1/10 RC climbing car crawler car truck; great for running at night or in low light areas. Super bright lighting with stable performance. Make your RC car more cool and attractive.

2.RC car led light emitting diodes are made of high quality metal and plastic, durable to use.

3.Working Voltage: 12V. Maximum Current Limit: 20mA. These pre-wired LED beads can be used in automobiles, motorcycles, signal flasher, toy cars, remote control aircraft, model flasher, and other luminous beads that require product function indicator.

1.Pack of 2 Universal RC led headlights,Compatible with Traxxas HSP Tamiya Redcat RC4WD Axial SCX10 Kyosho Arrma 1/8 1/10 1/12 RC Car Truck Monster Crawler.Also can be used on rc tank boat or DIY models.

2. Led Parameter: 8Pcs LEDs includes 4Pcs White LEDs(5mm) + 4pcs Red LEDs(5mm)

3. Convenient to use: Voltage: 3V-7V;No separate battery required, this 8LED RC crawler lights can be directly powered by the receiver,super convenient to operate.Make sure you have the spare receiver port.

7 different flashing modes (easily switched from one mode to another)

Flashing LED lights on front and back of bar for realistic look

Fits most 1/10th and 1/18th scale cars and trucks