Best Honda Lines in 2026

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

Fuel line: 1/4" ID. x 1/2" O.D, overall length 2 feet, Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts.

Compatible with Kohler 24 393 16-S, 24 393 16, 24 393 04-S, 24 393 04, 24 393 02, 15 393 01-S, 15 393 01, KH-24-393-16-S, KH-24-393-16, KH-24-393-04-S, KH-24-393-04, KH-24-393-02, KH-15-393-01-S, KH-15-393-01

Compatible with John D LG808656 M138498 M145667, Compatible with Honda 16700-Z0J-003, Ryobi 308459007, Kawasaki 49040-7001 49040-2075

Brand new and high-quality replacement straight fuel cutoff valve with clamps;

Package includes 2 pieces fuel shut-off valve, plus 4 pieces spring clamps;

Universal straight fuel cut-off valve, fit for 1/4-inch fuel line;

For gas, diesel etc. fuel hose lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.

Strechy 2 layers compound structure, heavy duty. 10 ft in length. 3/16 in 4.8mm inner diameter and 11/32 inch outer diameter (8.8mm). The Hose Clamp is 8mm inner diameter, made of 0.8mm thinkness steel.

The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.

For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.

Strechy 2 layers compound structure, heavy duty. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.

The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.

Universal fuel shut off valve: Can be used on I.D. 1/4-inch fuel line. COMPATIBLE WITH BS 494768 493960 698183 698181 697947 5019H 5019K; John D AM107340 AM36141 698183MA, MU698183; To-ro 54-3150 1-603770 5841-1 5905-1; Sna-pper 3-4212 / 2-4507 / 7034212

Compatible with Koh-ler CH13 CH18 CH20 CH22 CH23 CH25 CH620 CH621 CH640 CH670 CH680 CH730 CH740 CH750 CV17 CV18 CV19 CV20 CV22 CV22S CV23 CV25 CV490 CV491 CV492 CV493 CV620 CV624 CV640 CV670 CV675 CV680 CV682 CV724 CV725 CV730 CV732 CV740 CV742 CV750 CV752 CV940 CV960 CV980 CV1000 SV470 SV471 SV480 SV530 SV540 SV541 SV590 SV591 SV600 SV601 SV610 SV620 SV710 SV715 SV720 SV725 SV730 SV735 SV740 SV810 SV820 SV830 SV840 SV530S SV540S XT650 XT675 KT610 KT620 KT715 KT725 KT730 KT735 KT740 KT745

John D LA105 LA110 LA115 LA120 LA125 LA130 LA135 LA140 LA145 LA150 LA155 LA165 LA175 G100 G110 GT235 GT235E GT245 GX255 GX325 GX335 GX345 GX85 L105 L107 L108 L111 L118 L120 L130 LT166 LT180 LT133 LT155 LTR155 LT190 LTR166 LTR180 LX172 LX173 LX176 LX178 LX186 LX188 LX277 LX280 LX288 D100 D105 D110 D120 D125 D130 D140 D150 D155 D160 D170 Z225 Z235 Z245 Z255 Z335E Z335M Z345M Z345R Z355R Z375R Z425 Z435 Z445 Z465 S1642 SST15 STX30 STX38 STX46 RX63 RX73 RX75 RX95 SX75 SX95

3/16 inch inner diameter (0.5CM) and 1/3 inch outer diameter (0.8CM)

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

Custom Extra long 9.8 Feet Length (3M) can be cut to size for all your applications

Compatible with BRIGGS & STRATTON 494768, 697947 ,698183，5056 5056D 5056K 691035； For JOHN DEERE AM36141, AM107340 SNAPPER/KEES 2-4507 , 7034212 TORO/WHEEL HORSE 54-3150； For KAWASAKI 49019-7001； For OREGON 07-107； For OREGON 07-112； All 1/4 Quarter inch Fuel Lines.

Compatible with Kohler: 25 050 02, 25 050 02-S, 25 050 07-S, 25 050 21-S, 25 050 21-S1; For Land Pride: 831-031C, 831-035C; For Tecumseh: 34279A, 34279B, 34729, 740003B; For Toro: 105-8045, 108-3854; For Walker: 5020; For Woods: 70311.

Package Included: 3x 1/4" Fuel Shut Off Valve, 3x 1/4" Fuel Filter, 12x Hose Clamps

🏍️【Lawn Mower Fuel Line - Upgraded Set】-The Huthbrother includes 6-Foot Length Stretchy 1/4 Inch ID Fuel Line+ 2 Pcs 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps +2 Pcs 1/4 698183 Fuel Shut & 1 Pcs Carb Carburetor jet cleaning brushes. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

🏍️【3-layer thickened fuel line】-The fuel line is divided into 3-layers: inner pipe, outer pipe, and Braided fuel line. The inner pipe are made of rubber and outer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot hose can be cut to size for all your applications.

🏍️【Hose Clamps】-Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage.

SUITABLE FOR 1/4" & 5/16" - Inline Gas Fuel Filter for 6mm & 8mm 1/4" & 5/16" internal diameter pipe. These gas tapper filters are barbed, so there is no slippage from the fuel line. Easy to install and have no problems with leaking issues.

EASY TO SEE INSIDE - With this type of filter you can see if the filter is dirty and the debris that it has kept out of your gas line & carb. Installs easily and quickly. Do yourself a favor and swap out your old filter for one of these and replace it every couple of years.

CLEAN THE FUEL - If you don't use them already, these inexpensive filters are invaluable in keeping the debris that will get into your small engine fuel tank from getting to the carb. These will stop that crud from getting into the carb.

WORKS ON MOST MOWERS THAT HAVE 5/16" GAS LINE - The parts work fine in replacing the whole fuel line on your old lawn tractor. You can use a little soapy water on the tubing to push it onto the filter and onto the gas tank. Make sure the little metal spring clips are on the tubing a little further down than the length of filter ends. It makes it a lot easier to put on that way and the soapy water allows the tubing to slip on smoothly.

GREAT FUEL LINE FOR SMALL ENGINES - The correct OD is so much easier to install on a small engine than the larger diameter automotive fuel line. There is enough to do two to three engines (or more) depending on the length of run(s) required. This tubing fit your current small engine repair requirement and will be perfect for planned future upgrades and repairs.

LAWNMOWERS / RIDING MOWER FUEL LINE - Good Quality 5/16 Inch Gas Line Hose for your Lawnmowers. Just the right amount of 5/16 inch hose you needed to replace Factory Fuel Lines on push mower and riding mower. This is Quality Goodyear Hose Made in the USA unlike the crap that was deteriorating from the lawnmower manufacturers.

WORKS ON MOST GENERATOR THAT HAVE 3/16" GAS LINE - Works good on your honda Sportsman generator fuel line. this size line also would work on your Champion generator. Fuel line will hold up fine and works great on your Generator from the fuel tank to the carb.

GREAT FUEL LINE FOR SMALL ENGINES - For gas, diesel etc. fuel hose lines, vapor emission lines and vacuum smog control. Please note it's a non-pressure fuel line, not for engines with fuel pumps.

LAWNMOWERS / RIDING MOWER FUEL LINE - For use in mowers tractors snow blowers dirt bikes pit bikes tao tao and just about all small engines. Works perfectly to replace the cracked and leaking line on your generator.

WORKS ON MOST MOWERS THAT HAVE 1/4" GAS LINE - The parts work fine in replacing the whole fuel line on your old lawn tractor. You can use a little soapy water on the tubing to push it onto the filter and onto the gas tank. Make sure the little metal spring clips are on the tubing a little further down than the lenght of filter ends. It makes it alot easier to put on that way and the soapy water alows the tubing to slip on smoothly.

GREAT FUEL LINE FOR SMALL ENGINES - The correct OD is so much easier to install on a small engine than the larger diameter automotive fuel line. There is is enough to do two to three engines (or more) depending on the length of run(s) required. This tubing fit your current small engine repair requirement and will be perfect for planned future upgrades and repairs.

LAWNMOWERS / RIDING MOWER FUEL LINE - Good Quality 1/4 Inch Gas Line Hose for your Lawnmowers. Just the right amount of 1/4 inch hose you needed to replace Factory Fuel Lines on push mower and riding mower. This is Quality Goodyear Hose Made in the USA unlike the crap that was deteriorating from the lawnmower manufacturers.

7 Piece Bundle Including 4 Foot of 1/4 Inch I.D. Pro-1 Braided Fuel Line, 4 Clamps, 1 Shut-off Valve, and 1 Pro-1 Gas Inline Fuel Filter

Quality Aftermarket Replacement Parts. Fits small tractors, lawn mowers, snow mobiles, go karts, and more

Replaces Fuel Line on many Carburated Small Engines Including Kawasaki, Tecumseh, Briggs and Stratton, Kohler, and many others

1/4'' ID Fuel Line (6mm ID x 12mm OD) 3 feet long, 3/16" ID Fuel Line (4.5mm x 8.5mm) 3 feet long

0.22" ID Fuel Line (5.5mm*10.3mm) 3 feet long, 1/8" ID Fuel Line (3.5mm*7.5mm) 3 feet long

5/16" ID Fuel Line (7.3*12.5MM) 3 feet long

※ Fuel line hose（10 feet，black） ID: 1/4" OD: 1/2"；Fuel line clamp（20pcs）1/2"=12mm.

※ Fuel hose material: NBR+PVC/CSM (inner layer of corrosion resistant rubber, outer layer of anti-aging rubber, double layer of rubber with yarn in the middle to increase pressure resistance);Compatible with gasoline with ethanol content of 10% or more;Temperature range:-30°C to 120°C.

※ 1/4 Fuel line for Kawasaki Kohler Briggs & Stratton EZGO MTD TORO Troy-Bilt lawn mower, tractor, harvester, snow blower, golf cart, motorcycle, and other small engines models.

OEM standard generator fuel tube kit. Comes with 20 clamps for fixing the fuel hose which connects carb gas inlet and gas tank outlet. The protecting hose(supporter) is for the fuel hose to less abrasion.

3/16 inch (5mm) id; 3/8 inch (9mm) od; 39 inch in length. Oil resistant, high temperature and cold resistant from -22F to 338F.

Fits Honda GX120 GX160 GX240 GX270 GX340 GX390 small engines and generators powered by them.