Best Hubbell Wiring Device Kellems Motion Activated Switches in 2026

Automatically turns the lights on when you enter the room and off when you leave

Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently

Optional: senses daylight so lights do not turn on when there is enough natural light in the room

MOTION SENSOR GARAGE LIGHT Automatically detects motion from passive infrared sensors to turn lights on and off based on room occupancy and vacancy

PIR SENSOR SWITCH Passive Infrared Detection (PIR): Detects infrared to reduce false triggers from unwanted movements.

MOTION SENSOR WALL SWITCH Universal wiring design allows compatibility with any home. Easy install. Two Black Wires, any one connects with hot, and another with load

【Not Only A Light Switch】:SOZULAMP illuminated wall light switch is a standard single pole rocker light switches, just a screwdriver is enough to replace any standard switches with ease; Built-in hidden led nightlight protect kids from electrical shock; The hidden night light shines a pool of soft, glare-free lighting down the wall onto the floor that is just bright enough to light a pathway to where you are going in your home, prevent you from stubbing your toes or falls during midnight.

【Widely Applicable】:Just the right amount of light from a row of leds on the bottom edge of the light switch(not super bright like a night light), that doesn’t interfere with sleep; don't need to turn on the ceiling light and hurt eyes in the middle of the night; also helps locate the light switches at night; don’t have to fumble for the light switch; you can use the led night light wall switch for the outside lights and check the led at night to make sure you have turned the outside light off.

【Energy Efficient】:There is a small dot on the rocker switch itself behind which there is a dusk to dawn sensor, it means that the LED’s brightness varies with how bright the light in the room is. turns on as it gets dark and load is "OFF", turns off as brightens; The led night lights are super power-efficient, costs less than 10 cents to run annually, save money on your electricity bill. last about 25 times longer than incandescent.

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. The switch automatically turns lights on when motion is detected and turns off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Smart Mode & Away Mode】Set different light triggers based on your routine for effortless control. Automatically turns devices on and off at different times to give the appearance that someone is home.

Product 1: Light Switch - One (1) Digital Countdown Timer Rocker Light Switch

Product 1: Use - Upgrade your existing switches with this Pass & Seymour lightswitch with an integrated digital countdown timer with four pre-set countdown times of 60, 40, 20 and 10 minutes

Product 1: Convenience - Control lights, fans or heat lamps manually with the paddle switch or use the timer buttons to shut off a light or appliance automatically after a designated period to save on energy costs

✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.

✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.

✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

SAVE TIME AND MONEY: Tired of replacing an entire lamp or over paying for a quick touch sensor replacement, this easy to install sensor is what your'e looking for! This kit comes complete with an easy wiring diagram and 4 wire nuts to connect each wire.

Wattage Rating: 150W 3 way touch sequence LO-MED-HI-OFF, Compatible with three-way light bulbs, or one-way Light bulbs, LED and Incandescent. NEW 20% Smaller sensor allows for easier installation for existing or non existing touch sensor devices.

Industry Standard: This style touch sensor is UL certified and used everyday for lamp repair by your local professionals, they are reliable and top quality.

✅100% REFUND GUARANTEE: Welcome order ECOELER Sensor Switch products. If you don't absolutely love our product, let us know and receive a full, no questions asked refund. During used, if our Motion sensors is broken, don’t working, please contact us, we will refund or pay a new one to you.

✅NEUTRAL WIRE REQUIRED, The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.

✅VERSATILE SETTINGS: The Light switch sensor features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.

Multi-location, single pole or 3-way

Up to 6-Amps for lighting (120 Volts or 277 Volts) and 3-Amps for fans

Works with incandescent, halogen, magnetic and electronic low-voltage and non-dim LED and non-dim fluorescent bulbs, as well as general purpose fans

✅ PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING

✅【3-WAY SWITCH】This occupancy sensor switch is a 3-way switch allowing the lights to turn on from multiple switch locations in the room.

✅【Hands Free】Enjoy the convenience of hands-free lighting control. The motion sensor switch detects your presence and activates the lights, eliminating the need to fumble for switches in the dark.

Manual ON/Automatic OFF, provides 180-Degree field of view and 900 square feet of coverage

600W Incandescent/Halogen, 150W LED/CFL, 600VA Fluorescent, 1/6HP Motor loads. No Neutral wire required for installation

California Title 20/24 Compliant

Dual technology motion light switch combines passive infrared (PIR) and ultrasonic sensors in one sensor switch for enhanced accuracy and to detect fine motion, such as typing, reading, etc

Combination of PIR and ultrasonic sensors eliminates false positives by preventing lights from shutting off when the room is still occupied

Ideal for private or executive offices, meeting rooms, restrooms, libraries, classrooms, and other spaces where limited movement is likely to occur to ensure the light does not shut off by itself

✔Neutral Wire Required: Please review your wiring setup prior to purchase. The PIR infrared motion activated wall switch is need NEUTRAL WIRE (not suitable for 3way). If you have any installation issues, please consult an electrician or contact us through message, we will provide you technical guidance.

✔Easy Custom Modes: Light switch sensor features adjustable settings. Adjustable time delay from 15sec-1min-5mins-15mins-30mins, adjustable sensitivity and adjustable light level sensing. So you can set the switch according to your own needs.

✔Variety Modes Choice: The sensor light switch has three modes, OCCUPANCY (OCC) Mode: auto on & off, VACANCY (VAC) Mode: manual on & auto off and OFF Mode: manual on &off. Make your home smarter with a single switch.

Lighting Control – Conveniently control indoor lamps, lights and seasonal décor with this door activated entry transmitter and plug-in receiver featuring 1 polarized outlet

Wireless Sensor – Transmitter mounts to any door entry with included adhesive tape; can be placed on any door up to 150ft. from receiver – 1 CR2032 battery is included to power transmitter

Door Activated – The sensor will activate connected lights or fixtures as soon as the door is opened; device will turn off when door is closed or up to 20 minutes after turning on

✅【Three Working Modes are Available】 The sensor switch has Occupancy sensor switch (Auto turn on/off), Vacancy sensor switch (Manual turn on, auto turn off) and ON/OFF switch (Manual turn on/off). You can set it what you need.

✅【Easy to Operate and Use】 The motion sensor switch is just by pressing button to adjust the value of Delay-time and Light Sensor, don’t need to open the cover and adjust the value with a screwdriver, this save you the hassle.

✅【Quick and Accurate Setting】 You can get the exact Lux value and time delay. Light sensor : Default 25Lux(±10Lux), 15Lux, 35Lux , OFF optional; Time-Delay: Default 1min(15secs, 1min, 3mins, 5mins, 15mins, 30mins adjustable)

✅OCCUPANCY LIGHT SWITCH: Passive Infrared (PIR) occupancy detection, uses infrared signals to detect moving objects, to automatically turn ON/OFF lights. PIR motion sensor a bright LED indicator when the activated motion.

✅VERSATILE SETTINGS: Light sensor switch features adjustable settings. Adjustable time delay from 15sec-30min, Adjustable sensitivity from 20-100%, Adjustable Light level sensing.

✅360° DETECTION RANGE: Installed at 10 ft (from 5-15 ft), sensor detector provides 360-degree detection with 20-ft detection range. Ideal for hallways, bathrooms, storage areas, closets, mud rooms, pantries and more.

The passive inferred (PIR) sensors detects movement up to 1,200 square feet with a 180° field-of-view to automatically turn on/off the lights on when you enter/leave the room

Light timing can be independently set in increments of 10, 20, or 30 minutes while a daylight sensor will not turn on lights if ambient light in room is sufficient; works with incandescent bulbs up to 500W and LED bulbs up to 150W

Push button provides manual ON/OFF light switching at any time between occupancy detection (lights ON/OFF are fully controlled) and vacancy detection (lights manual ON and auto-OFF)

Conserves energy and automates your residential and commercial lighting when you enter or leave a room

180-degree field of view and detects major motion within 1,000-square feet of the sensor and minor motion within 300-square feet

Compatible with incandescent lamps, halogen fixtures, electronic and magnetic fluorescent ballasts and electrical motor loads

CONVENIENT: automatically turns lights off when room is vacant. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

Power input: 120VAC, 60Hz ONLY

Power output: 24VDC, 100mA (Class 2)

Control input: 24VDC, 5mA

Adorne SofTap dimmer by LegGrand lighting.

White finish plastic construction.

Tru-universal technology enables dimmer to control all load types.

High Quality: Made of premium plastic material, not easy to aging, sturdy and high quality for a long time use. Exquisite appearance design, with high sensitivity and stable performance.

Wide Application: Widely used to control LED light, compact fluorescent lamp, incandescent light bulb, alertor, exhaust fan, etc.

Adjustable Distance: Detection distance, ambient light and delay time are adjustable according to your actual demand.

Occupancy Sensor Switch

10A @ 120/277 VAC Fluorescent

8A @120 VAC Incandescent

10A 120/277VAC Fluorescent

8A 120VAC Incandescent

For indoor use only